LG SPQ8-S 2.0 Channel Sound Bar Wireless Rear Speaker-Complete Features/Instruction Guide
- September 3, 2022
- LG
Table of Contents
LG SPQ8-S 2.0 Channel Sound Bar Wireless Rear Speaker
Specifications
-
Product Dimensions
6.9 x 6.9 x 2.4 inches -
Item Weight
7.03 pounds -
Batteries
2 AA batteries -
Speaker Type
Soundbar -
Recommended Uses For Product
For Surround Sound Systems -
Compatible Devices
Bluetooth Devices -
Brand
LG
Introduction
The audio quality is improved, and installing an LG TV sound bar is not too difficult. In fact, if you select an LG Bluetooth sound bar, you can do away with cables and wires because it will connect wirelessly to your system.
Installing and using the Product
- Rear Speakers
- Wireless Receiver
- Connect the rear speakers to the wireless receiver via a speaker cable. When connecting the rear speakers to the wireless receiver, connect the black striped cable to the negative terminal of each speaker and the remaining cable to the positive terminal of each speaker.
- Connect to power in the following order: wireless receiver [ sound bar. Then, turn on the sound bar. When the connection is automatically established with the sound bar, the LEDs on the wireless receiver will light up in green.
If you see a red LED on the front of the wireless receiver, it means that the sound bar is not connected to the speakers. If this is the case, connect them in the following order.
- Press the Power button on the sound bar to turn it off.
- Press the PAIRING button on the back of the disconnected wireless receiver. Check if each LED blinks green.
- Press the Power button on the sound bar to turn it on.
- When the connection is established, you will see a green LED light on the front of the wireless receiver light up in green.
Connecting the Product
Connecting the rear speakers to the wireless receiver
Automatic connection
After completing the installation, the wireless receiver will automatically be connected to the soundbar. Connect the sound bar to the wireless receiver in the following order.
- Connect the speaker cables to the corresponding terminals on the rear speakers (left, right). Connect the black striped cable to the negative terminal and the other cable to the positive terminal.
- Connect the speaker cables on the rear speakers (left, right) to the wireless receiver.
- Plug the power cable into the wireless receiver.
- Plug the power cable connected to the wireless receiver into an outlet.
- Press the Power button on the sound bar to turn it on.
- When the connection is automatically established, you will see the LED on the front of the wireless receiver lights up in green.
Note
- Please only use the speakers provided with the product. Using other speakers may cause malfunction.
- Connect the speaker cables to the corresponding terminals. Connect to the positive cable to the positive terminal and the negative cable to the negative terminal. An incorrectly connected cable will distort the sound or produce no bass.
Safety Precautions
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER (OR BACK) NO USER
SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING
- TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
- Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION
- Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
- The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
- For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product.
- Be careful to make sure children do not put their hands or any objects into the *speaker duct.
- speaker duct: A hole for plentiful bass sound on speaker cabinet. (enclosure)
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case of an emergency, the
Power Plug must remain readily accessible
Check the specification page of this owner’s manual to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device
For models using an adapter
Only use the AC adapter supplied with this device. Do not use a power
supply from another device or another manufacturer. Using any other power
cable or power supply may cause damage to the device and void your warranty.
For models using a Laser device
This product employs a Laser System. To ensure proper use of this product,
please read this owner’s manual carefully and retain it for future reference.
Shall the unit require maintenance, contact an authorized service center. Use
of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure. To prevent direct
exposure to laser beam, do not try to open the enclosure.
Frequently Asked Questions
Will this work with the s75q and s65q?
The LG SPQ8-S 2.0 Channel Sound Bar Wireless Rear Speaker Kit is only compatible with the S90QY, S80QY and S80QW LG Soundbar models …^Ivan
Compatible with sl8yg?
The LG SL8YG 3.1.2 Channel 440W Sound Bar w/ Meridian Technology & Dolby Atmos is compatible with the LG SPK8-S 2.0 Channel Sound Bar Wireless Rear Speaker Kit. It is not compatible with the LG SPQ8-S 2.0 Channel Sound Bar Wireless Rear Speaker Kit.
Is this compatible with SL5Y?
The SPQ8-S wireless rear speaker kit is compatible with the following LG sound bars: S90QY, DS90QY, S80QY, and DS80QY.
Will this work with s75q lg soundbar 3.1.2?
The SPQ8-S wireless rear speaker kit works with sound bar models S90QY, DS90QY, S80QY, and the DS80QY.
Are they compatible with the LG meridian sp9ya?
The LG SPQ8-S 2.0 Channel Sound Bar Wireless Rear Speaker Kit is only compatible with the LG Soundbar models: S90QY, S80QY, and S80QW. The LG LG SPQ8-S 2.0 Channel Sound Bar Wireless Rear Speaker Kit is compatible with the LG SPK8-S 2.0 Channel Sound Bar Wireless Rear Speaker Kit
Son compatibles con lg snh5?
The SPQ8-S wireless rear speaker kit is only compatible with the following sound bars: S90Y, DS90QY, S80QY, and the DS80QY.
Are they compatible with the SP9a soundbar?
The SPQ8-S wireless rear speaker kit is compatible with the following LG sound bars: S90QY, DS90QY, S80QY, and DS80QY.
Is this compatible with the sp8ya soundbar?
The SPQ8-S wireless rear speaker kit is compatible with the following LG sound bars: S90QY, DS90QY, S80QY, and DS80QY.
Will this product be compatible with SP8A?
We do not have a sound bar with model # SP8A, I hope that you mean SL8Y. The SPQ8-5 wireless rear speaker kit is compatible with the SL8Y sound bar.
Do you have to run the speaker wire from the rear speakers to the box? Or are they truly wireless (other than the power supply)?
Yes, they are wireless. You can use either WiFi or Bluetooth technology to connect your SPQ8-S rear speaker kit to your sound bar.
Is this compatible with the lgspd7y soundbar?
Yes, the SPQ8-S wireless rear speaker kit is compatible with the SPD7Y sound bar.