IROAD TX1 Dash Cam User Guide

Table of Contents

IROAD-TX1-Dash-Cam-product

Do not arbitrarily disassemble and modify the product. It will be considered the user’s fault and it will void the warranty.
Do not handle the product while driving, it can cause serious accidents. (Please operate the product in a safe place after parking.)
Turn the recorder off when exposed to direct sunlight or used for too long. Otherwise, malfunction or breakdown will occur.
Do not remove the SD card or turn off the power during the firmware update. It may cause malfunction or loss of data.
The use of a genuine IROAD memory card is recommended. Failure to use a genuine SD card may cause error or malfunction.
Real-time recording and playback via Wi-Fi could be delayed depending on the specifications of your smart device.
Motion detection is initiated by image sensor software. Errors may occur depending on the surrounding environment and the voltage of the car.
If the GPS signal is good, ADAS will activate when the speed of the car is above the set speed. The surrounding environment may cause errors.
Incorrect installation of the uninterrupted power cable may cause malfunctions.
Installations must be different depending on the power type of the vehicle.
(Please contact a professional engineer if you need help to install it)

IROAD Global guarantees the quality of the item.
Only signed members can use this card. Transferring and lending the card to others is strictly not allowed.
No after-sale service will be provided in case the card is lost.
The warranty period of each part is as follows.
- Product(Front/Rear Camera): 1 Year
- Option Camera(Interior Infrared/External Waterproof Camera): 1 Year
- Memory Card : 6 Months
  Fuse Cable, Rear Cable, Wi-Fi Dongle: Does Not Cover

Model: IROAD TX1
Image sensor: Front: 2.0 Mega Pixel CMOS Image Sensor, Rear: HD SOI CMOS Image Sensor
Resolution/Frame: Front: FULL HD 1920x1080p@30fps, Rear: HD 1280x720p@30fps
Display: 3.5inch Touch LCD
Viewing angle: Wi-Fi supported
Smartphone Playback/Settings, Firmware Automatic Update
Wi-Fi button: Activate Stand-by Mode for Registration
Audio input: Embedded MIC
Video/Audio: H.264/ADPCM
Vibration Sensor: 3-axis Acceleration Sensor
Voice guidance: Effect sound/buzz alert to inform the condition of the device Voice guidance supported
External GPS: Synched with Google Maps Records location and speed of the vehicle
Storage medium: Micro SD 32GB ~ 256GB (Class10)
Recording mode: Driving, Event(Impact), Parking(Timelapse, Motion Detection)
Uninterrupted power: Uninterrupted Power (Low voltage cut-off, overheating prevention is embedded)
Power supply: DC 12V/24V
Humidity: 10 ~ 95%
Dedicated PC viewer: Win7,Win8,Win10(64Bit),Mac(OSX11.0orhigher)
Application: Android 6.0, IOS 13.0 or higher: Firmware update supported

Basic Components

IROAD-TX1-Dash-Cam-fig-2

The Basic components may change without prior notice.

Optional Items

ANDROID DEVICE

On your Android device, open the “Google Play Store” and download and install “IROAD”
After running the application, register your device.
- Activate the registration standby mode by pressing the Wi-Fi registration button “Stand-by mode for the registration” (Voice guidance)
Tap Connect Now
- From the IROAD, select your dashcam.
- The SSID and model will be shown.
- Once the user selects the device, it will be registered & connected.

iOS DEVICE

On your iOS device, open the “App Store” and download and install “IROAD”
After running the application, register your device.
- Activate the registration standby mode by pressing the Wi-Fi registration button “Stand-by mode for the registration” (Voice guidance)
Tap Connect Now
- follow the on-screen instructions to connect the product to your smartphone.
Select the Wi-Fi Network
- From the Wi-Fi setting menu on your smartphone, select the Wi-Fi network starting with “IROAD”
Enter Password
- Enter “qwertyuiop” in the password ﬁeld Now the product is connected to your iOS device via Wi-Fi

More Information

Made in Korea

IROAD MOBILITY CO., LTD.
www.iroadkr.com

CORVIT INTERNATIONAL SINGAPORE
www.iroad.sg

POSIS HONG KONG
www.iroad.hk

IROAD MALAYSIA MALAYSIA
www.iroad.my

Q: What should I do if the product malfunctions?
- A: If you experience any issues with the product, please contact our customer support for assistance.
Q: Can I use a different brand of SD card?
- A: It is recommended to use genuine IROAD memory cards to avoid errors or malfunctions.
Q: How can I update the firmware?
- A: Ensure not to remove the SD card or turn off the power during the firmware update process to prevent malfunction or data loss.