DOLPHIN DR-60 Waterproof Bluetooth Speaker Instruction Manual

DOLPHIN DR-60 Waterproof Bluetooth Speaker

Package Contents

1. Speaker
2. USB-C Charging Cable
3. 3.5mm Aux Cable
4. lnstruction Manual

Control Panel

1. Power Switch/MODE/Light Switch: Long press to turn ON/OFF Unit’s power supply. Quick press twice to toggle between source Bluetooth/USBfTF/AUX/FM Radio. Short press to change the different light modes.
2. + : Long press to select next track in Bluetooth/USB/TF Card Modes. Long press to select next preset frequency in FM mode. Short press to increase the volume.
3. -: Long press to select previous track in Bluetooth/USB/TF Card Modes. Long press to select previous preset frequency in FM mode. Short press to decrease the volume.
4. Play/Pause/SCAN/WAVESYNC: Play or Pause in Bluetooth/USB /TF Card Mode. When in FM mode, short press to scan for available frequencies. When in Bluetooth mode, quick press twice this button to enter WAVESYNC mode.
5. USB Slot: Insert USB Drive to listen stored tracks
6. DC 5V IN: Use included USB – C charging cable to charge unit. (Adaptor not included)
7. TF Card Slot: Insert TF card to listen stored tracks
8. Charging Indicator: The RED light is on when charging, the light will turn to GREEN when the unit is fully charged.
9. AUX input : Connect external media player using 3.5mm line in cable (cable included).

Paring A Bluetooth Device

Use Bluetooth mode to stream music from a Bluetooth enabled player (e.g., smartphone, or tablet device). A device must be paired with the unit before using them together for the first time.

1. Make sure Bluetooth is enabled on your device and that it’s next to the unit before attempting to pair it.
2. Turn on the unit and set it to Bluetooth mode ( quick press twice the mode button if required to Bluetooth status) . The unit will automatically enter into Bluetooth pairing mode.
3. Use your device to search for nearby Bluetooth devices. Our speaker pairing name – DR60.
4. Select “DR60” from the list of found/available devices.

Wavesync Connection

To connect two speakers using WaveSync, first make sure you have two matching speakers with the same model number, and both are not connected to any device. Then do the following:

1. Turn on both speakers and put them in Bluetooth mode.
2. Quick press twice PLAY/PAUSE button on one of the speakers and you will hear a beep noise confirming the connection.
3. Connect your device to the speakers by following the Bluetooth instructions on the top of this page.
4. Now any music played through Bluetooth will play on both speakers. This function only works in Bluetooth mode and does not transfer music from Radio, AUX, or USB/TF. Trouble shooing: If you have any trouble in connecting in WAVESYNC mode, suggest switch OFF both units and restart in pairing from point.

AUX Mode

1. Use included 3.5mm AUX cable.
2. Connect one end of the cable to the AUX port of the speaker and the other end to your audio device. You can now playout music.

USB/TF MP3 Function

1. Place your MP3 song files in the root folder of a USB drive or TF card.
2. Insert the card into the proper port and the speaker will automatically begin to play the songs.
   You can skip through the songs with the minus and plus buttons.

FM Radio

1. Quick press twice the MODE button once and you will be in the radio mode.
2. Short press the Play/Pause button and the speaker will scan for available radio stations.
3. 0nce it is done scanning, you can long press the next and previous buttons to switch between the stations.
   Note: Insert the included USB-C charging cable to use as the FM external antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>