Nartoup K1 Wireless Microphone iPhone User Manual
- June 15, 2024
- Nartoup
Table of Contents
Nartoup K1 Wireless Microphone iPhone
Introduction
Thanks for choosing our product. This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in on line live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions. The wireless Microphone consists of two parts, one is Microphone transmitter , the other one is receiver. (See as below picture)
ID Diagram
- Windproof net
- Microphone indicator
- Microphone charging port
- Microphone clip
- Switch key
- port to connect phone
- Receiver indicator
- Type-C port of receiver
How to use
-
Step 1: Connect the receiver to phone with port.
Note: oppo /vivo/ iqoo / realm brand mobile phones can be used normally only when they go to the settings (search “OTG” – turn on OTG power supply) -
Step 2: Press switch key of microphone, the indicator light turns green, and then power is turned on.
-
Step 3: The indicator light of receiver keeps always on, then open the phone camera, live App or other Apps , and then to use the microphone to receive sound.
Special Note:
For the use of 8 port : there is no battery in receiver , and no need to recharge during live. If the phone is low power during Live, it can be recharged directly through 10 port.
About UI
Microphone Transmitter
| Fun ction | How to use | Light |
|---|---|---|
| Power on | Press sw itch ke y once | Green light on |
| Power off | Presssw1tchkeyabout3 |
seconds
| Light o ff
Pairing| | Red and green fla sh alternately
Paired| | Green light keeps on
Pause /Recovery| Press switch key once| The green light flashes slowly during
pause
Low battery alarm| Power on state| The red and green lights come on every 10
seconds
Charging| Ch arging with cab le| Theredlightgoesout whenit is fu ll ycharge d
Receiver
| Funct ion | How to use | Light |
|---|---|---|
| Power on | Plug in the device | Light on |
| Power o ff | Plug off the device | Light off |
| Pairing | Light flashes slowly | |
| Pa ired | li ght on |
REVERS MODE : Press the START BUTTON 3 times continuously to enter reverb mode Product support and listening function This product comes with Al noise reduction, which will enter the noise reduction mode when it is started
Packing List
Content of packing
- Microphone transmitter
- receiver
- charging cable
- User manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>