DOLPHIN SP-807RBT Portable Party Speaker Instruction Manual

June 6, 2024
DOLPHIN

DOLPHIN SP-807RBT Portable Party Speaker

Congratulations to the purchase of this product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features.

Safety Instructions

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.

  • Prior to using the product, please ask advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
  • The product contains voltage carrying parts. Therefore do NOT open the housing.
  • Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
  • Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
  • The product is not suitable for continuous use.
  • Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
  • When unplugging the product from a mains outlet, always pull the plug, never the lead.
  • Do not plug or unplug the product with wet hands.
  • If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
  • If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
  • To avoid fire and shock hazard, do not expose the product to rain and moisture.
  • All repairs should be carried out by a qualified technician only.
  • Connect the product to an earthed mains outlet protected by a 10-16A fuse.
  • During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
  • If the product has not been used for a longer period of time, condensation may occrur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
  • To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
  • Do not repeatedly switch the product on and off. This shortens the life time.
  • Keep the product out of the reach of children. Do not leave the product unattended.
  • Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
  • Do not force the controls.
  • If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
  • If this product have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
  • If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
  • If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
  • Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
  • Keep away from electronic equipment that may cause interference.
  • Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
  • Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
  • Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
  • The mains voltage is 100-240V 50/60Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product voltage of the country is suitable for this product.
  • Keep the original packing material so that you can transport the product in safe conditions.

| This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
---|---
| This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
---|---

The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41 °F and 35°C/95°F

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

OVERVIEW

  1. Main Channel Controls
    The main channel can play music from an Auxiliary source, Bluetooth, USB/SD Card, or FM Radio.
    MODE: Switches between the input modes mentioned above.
    • WaveSync: Use the instructions on the following page to learn how you can pair two speakers wirelessly for double the power.
    REPE: Repeats the current track playing in (MP3 mode when an SD or USB card is entered.
    • PLAY /PAUSE: Press this button to play or pause music playing from Bluetooth, USB, or SD. When in radio mode, hold this button for three seconds to scan for radio stations.
    • PREV /NEXT: Use these buttons to switch through songs playing on Bluetooth or USB/SD or channels in FM Radio mode.

  2. Main Channel Inputs
    SD/USB: Insert a USB or SD card with to playyour MP3 files.
    AUX: Use a 3.5mm audio cable to connect am auxiliary device while in AUX

  3. Main Channel Sound Controls
    VOLUME: Controls the volume of the main channel.
    BASS: Controls the volume of the low frequencies on the main channel.
    TREBLE: Controls the volume of the high frequencies on the main channel.

  4. Channel 2
    • MIC IN: Connect a microphone or other source using an 1 /4″ audio cable.
    • MIC VOL: Controls the volume of the microphone.
    ECHO: Hold the forward and back buttons to raise or lower the echo effect of the microphone.

  5. Power Switch
    Use this switch to turn the unit on and off.

  6. LED Light Switch
    Use this switch to turn the Sound Activated Multicolor LED lights on and off.

BLUETOOTH CONNECTION

  1. Press the mode button on the main channel control panel until you are in Bluetooth modele. BT
  2. Turn on the Bluetooth setting on your phone and search for”SP-807RBT’
  3. Once connected, the LCD display will confirm the connection and you can begin to play music from your Bluetooth device. If a PIN code is required, enter “0000′:

The wireless range for Bluetooth on this speaker is 33ft (~10m). Any distance further than this may cause stability issues with the music cutting in and out.

WAVESYNC™

  1. Turn on both speakers and put them in Bluetooth mode.
  2. Pair one of the speakers with your Bluetooth device using the Bluetooth  instructions on the top of this page.
  3. Press the WaveSync™ button on the speaker your phone is paired to and you will hear a beep noise confirming the connection.
  4. Now any music played through Bluetooth will play on both speakers. This function only works in Bluetooth mode and does not transfer music from AUX, USB, FM Radio. To disconnect the speakers, press the WaveSync™ button on either speaker.

NOTE: WaveSync may not work with older or newer versions of the same model speaker.WaveSync is also not likely to work with another WaveSync enabled model even from the same brand. Consult your dealer before making any purchasing decisions.

USB/SD MP3 FUNCTION

You can play your MP3 files using a USB or SD card by following the below instructions:

  1. Place your MP3 song files in the root folder of a USB or SD card.
  2. Insert the card into the proper port and the speaker will automatically begin to play the songs.
  3. You can skip through the songs with the minus and plus buttons.

FM RADIO

With the FM Radio function, you can listen to nearby radio stations using the following instructions:

  1. Press the mode button once and you will be in the radio mode.
  2. Hold the play button once and the speaker will scan for nearby radio stations.
  3. Once it is done scanning, you can use the forward and back buttons to switch  between the stations.

AUX MODE

Use the following instructions to play music on this speaker from an auxiliary device.

  1. Find a 3.5mm AUX cable or RCA cable.
  2. Connect one end of the cable to the AUX port of the speaker and the other end to your audio device.
  3. Press the Mode button to enter AUX Mode
  4. You can control the volume on both your audio device and the speaker iteself.

ACCESSORIES

Included in the box of this speaker is a miccrophone, power adaptor, remote control, and this user manual.

If any items are missing, please contact your dealer

BATTERY AND CHARGING INSTRUCTIONS

  • To charge the battery, use the power adaptor to connect the the speaker to a wall outlet.
  • Make sure to fully charge battery before using it for the fisrt time to increase the life of the battery in the long term.
  • The unit takes approximately 6 hours to fully charge. It will automatically begin charging once the power cable is connected.
  • To maximize battery lifespan, make sure to charge the battery at least once every 3 months.
  • Use the power switch to turn off the unit when when it is not in use.

LED LIGHTS

Use the LED Light Switch to turn the LED Lights on or off. The LED lights are sound activated which means that they respond to the music to make a unique light show. Make sure to keep the lights off when you will not be using them for a long period of time.

FCC Rules

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pl1rsuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is enco1.1raged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into all outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experie11ced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s al1thority to operate the equipment.

RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minim um distance of 20cm between the radiator and any part of your body.

| HAPPY
If you are happy with your item, consider connecting with us on social media or leaving a positive rating online.
---|---
| Something Wrong?
If you are unhappy with your item then we are not accomplishing our goal. Please contact us through our toll free number to see how we can make things right.
---|---

FOLLOW US AT:

@dolphinaudio

✆ 1.888.550.3938
✆ 1.951.800.00778 (International)

support@dolphinaudio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

DOLPHIN User Manuals

Related Manuals