DOLPHIN SP-210RBT Portable Bluetooth Party Speaker Instruction Manual

DOLPHIN SP-210RBT Portable Bluetooth Party Speaker Instruction Manual

DOLPHINAUDIO.COM/SP-21ORBT

Carefully read the following instructions to properly use this item and get the most out of it. If you are having trouble, please call us using the phone number located on the back cover of this manual.

OVERVIEW

1. Power Button
   Use this switch turn the unit on.

2. LED Light Switch
   Use this switch to turn the LED lights on the unit on or off.

3. Power Input
   Use the included power cable to connect this unit to a 110-220v wall outlet.

4. Volume
   Controls the Volume of the music playing on the main channel.

5. X-BASS
   Uses X-BASS technology to enhance the bass of your music
   playing on the main channel.

6. Microhpone Sound Controls (Channel 2)
   The following dials controls the the sound coming from the “MIC IN” Jack. This channel can be used simultaneously with the main channel and Channel 3.
   • M.Echo: Controls the Echo.
   • M.Bass: Controls the volume of the low freqency sound.
   • M.Treble: Controls the volume of the high freqency sound.
   • M.Vol: Controls the overall volume.

10. Guitar Volume Control (Channel 3)
Controls the volume of the sound coming throught the “GUITAR IN”. This channel with work simultaneously with the main channel and channel 2.

11. MIC Priority
When on, this function lowers the volume of the music on the main channel by 50% when you sing or talk on the microphone.
12. Guitar In (Channel 3)
Use a 1/4″ Cable to connect a guitar or other audio source to Channel 3.
13. Mic In (Channel 2)
Use a 1 /4″ Cable to connect a microphone or other audio source to Channel 2.
14. FM Antenna
Extend this antenna to pick up clear signals of radio stations far away.
15. Main Channel Controls
The main channel is able to play music from Bluetooth, FM Radio, Auxilliary, USB, SD, orTF card.

• MODE: Switches between the input modes mentioned above.
• WaveSync: Use the instructions on the following page to learn how you can pair two speakers wirelessly for double the power.
• REPE: Repeats the track playing on USB, SD, orTF Card.
• PLAY: Press this button to play or pause music playing from Bluetooth, USB, or SD. When in FM Mode hold this button to scan for stations.
• PREV/NEXT: Use these buttons to switch through songs playing on Bluetooth, USB, SD, orTF card or channels in FM Radio mode.
• USB/SD/TF: Insert a USB, SD, orTF card in to the proper portand the speaker will automatically find any MP3 tracks and play them.

16. Graphic Equalizer
Use this equalizer to personalize the sound your specific preference. The right side controls the low end (bass) frequencies and the left side controls the high end (treble) frequencies.

17. External Battery Input
Use the instructions on the next page to connect an external battery for even longer playing times between charges.
18. Auxiliary/Line Input
Play music from an auxiliary device with an RCA cable when the main channel is in AUX mode.

Bluetooth Connection

1. Press the mode button on the main channel control panel until you are in Bluetooth mode.
2. Turn on the Bluetooth setting on your phone and search for”SP-210RBT”.
3. Once connected, the LCD display will confirm the connection and you can begin to play

The wireless range for Bluetooth on this speaker is 33ft (-10m). Any distance further than this
may cause stability issues with the music cutting in and out.

WAVESYNC

To connect two speakers using WaveSync, first make sure you have two matching speakers with the same model number. Then do the following:

Wirelessly pair two SP-21 ORBT’s together to double the power with WaveSync™ Technology

1. Turn on both speakers and put them in Bluetooth mode.

2. Pair one of the spaekers with your Bluetooth device using the Bluetooth instructions on
   the top of this page.

3. Hold the WaveSyncT”‘ button on both speakers simultaniously until you a beep noise
   confirming the connection.

4. Now any music played through Bluetooth will play on both speakers. This function does
   not transfer music coming from AUX, USB, FM Radio or any microphone/guitar inputs.

NOTE: WaveSync may not work with older or newer versions of the same model speaker.
Wave Sync is also not likely to work with another Wave Sync enabled model even from the same
brand. Consult your dealer before making any purchasing decisions.

USB/TF MP3 Function

You can play your MP3 files using a USB or SD card by following the below instructions:

1. Place your MP3 song files in the root folder of a USB or SD card.
2. Insert the card into the proper port and the speaker will automatically begin to play the songs.
3. You can skip through the songs with the minus and plus buttons.

FM RADIO

With the FM Radio function, you can listen to nearby radio stations using the following instructions:

1. Press the mode button once and you will be in the radio mode.
2. Hold the play button once and the speaker will scan for nearby radio stations.
3. Once it is done, you can use the forward and back buttons to to switch between the stations.

AUX Mode

Use the following instructions to play music on this speaker from an auxiliary device.

1. Find a 3.Smm AUX cable or RCA cable.
2. Connect one end of the cable to the AUX port of the speaker and the other end to your audio device.
3. Press the Mode button to enter AUX Mode.
4. Adjust the volume on both your audio device and the speaker iteself.

ACCESSORIES

Included in the box of this speaker is a wired microphone, power cable, remote control, and this user manual. If any items are missing, please contact your dealer.

BATTERY AND CHARGING INSTRUCTIONS

• To charge the battery, use the power cable to connect the the speaker to a wall outlet.
• Make sure to fully charge battery before using it for the fisrt time to increase the life of the battery in the long term.
• The unit takes approximately 6 hours to fully charge. It will automatically begin charging once the power cable is connected.
• To maximize battery lifespan, make sure to charge the battery at least once every 3 months.
• Use the power switch to turn off the unit when when it is not in use.

EXPANDABLE BATTERY INSTRUCTIONS

With the External Battery Input you can connect a secondary battery to increase the play time in between charges. Follow the below instructions to properly connect an external battery.

1. Aquire a 12V battery. The capacity could be any size. For reference, the capacity of the battery already built into this is speaker is 7000mAh (7 Ah).
2. Aquire a red and black battery connector cable and locate the external battery input on the back of the speaker.
3. Insert the exposed end of the red wire into the red clamp of the external battery input, and the black wire into the black clamp.
4. Connect the red clamp on the other end of the wire to the positive terminal of the battery and black clamp to the negative terminal.
5. Charge the speaker as you would normally until the battery indicator light turns green and both batteries will be fully charged and ready for use.

Warning: Exposed metal such as clamps or exposed wire can heat up in this process. Do not use this function around children or flammable objects.

HAPPY
If you are happy with your item, consider connecting with us on social media or leaving a positive rating online.

Something Wrong?
If you are unhappy with your item then we are not accomplishing our goal. Please contact us through our toll free number to see how we can make things right.

@dolphinaudio

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>