AT T YJW-06720 Qi2.0 Magnetic Charging Car Dock User Manual
- June 14, 2024
- AT&T
Table of Contents
AT T YJW-06720 Qi2.0 Magnetic Charging Car Dock
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- RF Exposure Testing: Person should be at least 20 centimeters away from the device surface
- FCC Certification: Complies with FCC RF Exposure requirements of KDB 447498
Product Usage Instructions
FCC Warning:
This device complies with part 15 of the FCC Rules. Ensure the following
conditions are met:
- This device may not cause harmful interference.
- This device must accept any interference received, including undesired operation.
Modifications:
Avoid making any changes or modifications not approved by the responsible
party as it could void the user’s authority to operate the equipment.
RF Exposure Testing:
When using the device, maintain a distance of at least 20 centimetres
between yourself and the device surface to comply with FCC regulations.
FAQ (Frequently Asked Questions)
-
Q: What should I do if the device causes interference?
A: Ensure that the device is not placed near other electronic equipment that could be affected by its operation. If interference persists, contact customer support. -
Q: Can I modify the device for better performance?
A: No, any modifications not approved by the responsible party could impact the device’s compliance and void your authority to operate it.
Specifications
Input: SVDC/3A; 9VDC/2.22A; 12VDC/1.67A Output: Up to 15W
Includes:
Magnetic Car Charger, Vent Mount, Suction Mount, Holder, VPC, and Cable.
Compatible with all Qi-enabled devices.
Using your Wireless Car Charger
-
Unscrew the large socket nut and push the ball joint into the hole until it snaps into place.
-
Screw the socket nut back on until it is tight – this locks the wireless charging pad and holds the adjustable holder in place.
-
Using the provided cable, insert either end of the USB-C plug into the Car Charger and Magnetic Wireless Charger. insert the car charger into the car’s cigarette lighter socket.
-
VENT MOUNT Attach the vent mount by placing it in the appropriate location of the car air vent and pushing the lever into place.
NOTE: The fixed lever has a few gear positions. Please adjust as needed.
SUCTION MOUNT Attach the suction mount by placing it onto the dashboard or window in your car and lock the mount by pressing down on the lever. -
Place your phone on the Magnetic Wireless Charger; it will align automatically and start charging. Adjust the support holder as needed.
Charging Indicator Light Status
- Red flashing light: ERROR, please re-position your device.
- Greenlight: CHARGING, lights up green, flashes 3 times and goes off (the device will remain charged).
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimetres from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.