radioshack 2604760 6 Buttons Wireless Mouse User Manual

: July 9, 2024
: RadioShack

Table of Contents

radioshack 2604760 6 Buttons Wireless Mouse
Product Information
Product Usage Instructions
Troubleshooting
Warning

radioshack 2604760 6 Buttons Wireless Mouse

radioshack-2604760-6-Buttons-Wireless-Mouse-
product

Product Information

Specifications

Model: 2604760
Wireless Mouse with 6 Buttons

Features

Left key, Right key, Backward key, Forward key
Non-slip scroll wheel
DPI key

Technical Parameters

This device complies with Part 15 of the FCC Rules.

RF Exposure: General RF exposure requirements met.

Product Diagram

1. Left key
2. Non-slip scroll wheel
3. Right key
4. Backward key
5. Forward key
6. DPI key

Product Usage Instructions

Installation

Insert batteries into the wireless mouse.
Connect the USB receiver to your computer.
Turn on the wireless mouse.

Important

Ensure the battery polarity is correct and the USB receiver is connected properly for the device to function.

Troubleshooting

If the mouse doesn’t work

Check battery polarity.
Ensure USB receiver connection.

If the mouse moves slowly or malfunctions

Increase distance between mouse and other devices.
Turn off other wireless devices to reduce interference.

Warning

This device complies with FCC rules and must not cause harmful interference.

PACKAGE DETAILS

1 2.4G wireless optical mouse
1 Dual receiver mini USB/TYPE-C receiver
1 user manual

FEATURES

Dimensions: L104xW71xH38mm
6 button
800/1200/1600DPI
Snap-in Nano receiver
1 AA battery (not included)
Windows XP/Vista/WIN8/WIN10

TECHNICAL PARAMETERS

The mouse’s rated voltage is 1.5V and the rated current is 16 mAh.
2.4G wireless radio frequency technology.
Working distance: up to 10M.
Multi-level sleeping function, helps you save more power.
Low power and low current consumption design, prolonging battery life longer.
Plug and play, easy!
Ergonomic and comfortable design, easy operation.

PRODUCT DIAGRAM

INSTALLATION

Open the battery cover at the bottom of the mouse and insert the AA battery in the correct direction. When the battery is installed, the LED light will light up for 2 seconds and then it will turn oﬀ. This means the mouse is in working state.
Connect the receiver on your computer’s USB input.
You can now use your mouse.

IMPORTANT

When you unplug the receiver or host shuts down, the mouse will immediately stop working (sleep mode).
When the mouse is in sleep mode, you can wake it up by pressing any button.
When you connect the receiver or reboot the computer, you should click any button, LED will light up; this means the mouse is in working state.
You can use this mouse on any surface except glass.

TROUBLESHOOTING

IF DOESN’T WORK, WHAT CAN WE DO?

Check if the battery’s positive and negative electrode is right.
Check if the USB receiver is connected correctly.

WHEN THE MOUSE MOVES SLOWLY OR MALFUNCTIONS, WHAT CAN WE DO?

Increasing the distance between the mouse and other computer equipment.
Turn oﬀ other wireless devices, may aﬀect the transmission and extend the mouse’s response time.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

RF exposure

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.