naeo Massaging Foot Warmer Instructions

: July 9, 2024
: naeo

Table of Contents

naeo Massaging Foot Warmer
DETAILED DIAGRAM OF THE COMPONENTS
OPERATION
CARE AND MAINTENANCE
TECHNICAL SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

naeo Massaging Foot Warmer

naeo-Massaging-Foot-Warmer-product

WARNING

This appliance can be used by children aged & years and over and by persons with reduced physical, sensory, or mental capacity, or those with a lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
This foot warmer may not be used by very young children (0-3 years old) as they are unable to respond to overheating.
This foot warmer may not be used by young children (3-8 years old) unless the controller has been set by a parent or a responsible adult and the child has been given adequate instructions on how to use the product safely.
The foot warmer must not be used by people who are sensitive to heat or anyone unable to properly operate the controls.

Children must not play with the appliance. The appliance must not be cleaned or maintained by unsupervised children.

Do not use the foot warmer if the inside fabric is damaged.
Do not insert needles into the foot warmer.
Do not use it when folded or bunched up.
Do not use it if wet.
The electrical and magnetic fields emitted by this foot warmer may interfere with the function of a pacemaker. Please consult your doctor and the manufacturer of your pacemaker before using this product.
Do not pull, twist, or make sharp bends in the cables.
Please check the foot warmer frequently for signs of wear and tear or damage. If you detect signs of improper use of the foot warmer, it must be inspected by the manufacturer before turning it on again.
When the foot warmer is switched on:
Do not place any products on it (e.g., suitcase or washing basket)
Heating sources, such as hot water bottles, heating wraps, or similar, must not be placed on the foot warmer.
ALWAYS unplug the unit from the power source immediately after using and before cleaning. DO NOT reach for a unit that has fallen into the water. Unplug it immediately.
An appliance should NEVER be left unattended when plugged in. Unplug from the outlet when not in use and before putting on or taking off parts or attachments.
Close supervision is necessary when this unit is used by, on, or near children, invalids, or disabled persons.
DO NOT use outdoors. Use this unit only for its intended use as described in this manual. DO NOT use attachments not recommended; specifically, any attachment not provided with the unit. DO NOT carry this unit by the supply cord or use the cord as a handle. NEVER operate this unit if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water.
Kethethe cord away from heated surfaces. DO NOT operate under a blanket or pillow. Excessive heating can occur and cause fire, electrocution, or injury to a person.
To disconnect, press on the power button, then remove the cable from the power source.
Use the heated surface carefully. It may cause serious burns. DO NOT use over insensitive skin areas or in the presence of poor circulation. The unattended use of heat by children or incapacitated persons may be dangerous.
If the supply cord is damaged, the manufacturer, its service agent, or a similarly qualified person must replace it, to avoid any hazard.

Intended use: this foot warmer is only designed to warm up the human body.
The manufacturer is not responsible for any damage caused by improper use.

DETAILED DIAGRAM OF THE COMPONENTS

OPERATION

The foot warmer is intended for use on the feet. For optimal use, sit in a chair, and place the foot warmer on the floor in front of you.

Insert the USB connector into a 5V/1A power source, such as a USB wall adapter (not included), and plug it into an electrical outlet.
Press and hold the Power button once to turn the foot warmer on.
Heat will be enabled and the LED indicator on the Power button will turn red.
Press the Power button a 2a time to switch to high vibrations only. The LED indicator will turn blue.
Press the Power button a 3” time to switch to heat + low vibrations mode. The LED indicator will turn green.
Press the Power button a 4th time to power OFF.
Note: Automatic switch-off time. The foot warmer is equipped with an automatic switch-off function. The entire device will automatically turn off approx. 45 minutes after the initial use.

CARE AND MAINTENANCE

Turn off and unplug the foot warmer from the power source. Let it cool down.
Spot clean with a soft, damp cloth, using no abrasive cleaners.
Store in a cool, dry place, away from sources of water, heat or dust.
- DO NOT WASH. SPOT CLEAN ONLY.
- DO NOT IMMERSE IN WATER OR ANY TYPE OF LIQUID.
- DO NOT ALLOW ANY LIQUID TO COME INTO DIRECT CONTACT WITH THE USB CABLE.

TECHNICAL SPECIFICATIONS

Model: GD-W10 Foot warmer
Item number: 3324370
Input power supply: AC 100-240V, 50/60Hz
Output power supply: DC 5V = 1.0A
Dimensions (approx): 29288.5cm

Correct disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Overview Trading Ltd, 5 West Victoria Dock Road, DUNDEE, DD1 3JT, UK Green Delta Ltd c/o SEDIS Logistics, 7 Rue des Sablières, 7522 Blandain, Belgium Made in China

This appliance complies with the below-listed EU Directives