naeo Ultrasonic Aroma Diffuser Paola Instruction Manual

July 9, 2024
naeo

naeo Ultrasonic Aroma Diffuser Paola

Please read this manual carefully and keep it in a safe place.

WARNING

  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
  • This device is not a toy. Please keep the appliance out of the reach of children.
  • Only to be used as an ambiance diffuser, do not inhale.
  • Use in an environment between (l0°C and 30°C).
  • The appliance is only to be used with the power unit supply provided with the appliance.
  • For optimal maintenance, use mineral water (bottled or tap water).
  • Do not exceed the maximum water level (150ml).
  • Always pour the water before adding essential oils or home fragrance.
  • Do not use pure essential oils or home fragrances without water.
  • The appliance is only to be used with the recommended vaporizing medium. The use of other substances may give rise to a toxic or fire risk.
  • Continuous use of the diffuser may, in the long term, damage the product and shorten its lifespan.
  • Unplug the appliance before any manipulation such as cleaning or filling operations for example.
  • Do not remove the lid or cover the diffuser when the appliance is in use.
  • Change frequently the water in the tank to avoid any dirt building up that may damage the appliance.
  • Do not immerse.
  • In case of water infiltrations into the appliance, unplug the diffuser immediately and leave it to dry for at least 3 days before reusing it.
  • Empty and clean the diffuser before storage. Clean the diffuser before the next use.
  • Clean the water tank every 3 days. Do not use chemical products {such as acids, alkaline, etc.) or any corrosive detergents to clean the appliance.
  • For descaling: fill the tank with equal parts white vinegar and water, operate the appliance for an hour, then turn it off and let it sit for an hour before emptying the tank.
  • Be aware that high humidity levels may encourage the growth of biological organisms in the environment.
  • Do not permit the area around the diffuser to become wet. If dampness occurs, turn off the diffuser.
  • Never leave water in the tank when the appliance is not in use.
  • Warning: Micro-organisms that may be present in the water or in the environment where the appliance is used or stored, can grow in the water tank and be blown in the air causing very serious health risks when the water is not renewed and the tank is not cleaned properly every 3 days.
  • Empty the tank and refill every third day. Before refilling, clean it with fresh tap water or cleaning agents if required by the manufacturer. Remove any scale, deposits, or film that has formed on the sides of the tank or on interior surfaces, and wipe all surfaces dry.
  • Do not attempt to disassemble your diffuser.
  • Always disconnect the adaptor from the electrical outlet when not in use.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
  • Always unplug the device when not in use. Do not permit the area around the diffuser to become wet. If dampness occurs, use the intermittent mode or turn off the diffuser. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths to become damp.

DETAILED DIAGRAM OF THE COMPONENTS

PREPARATION OF THE DIFFUSER

  1. Insert the adapter’s connector into the DC jack input at the back of the base of the diffuser.
  2. Place the diffuser on a flat and stable surface and away from the edge.
  3. Remove the diffuser’s outer and inner cover.
  4. Pour mineral water (bottled or tap water) into the water tank up to the maximum level indicated {150 ml).
  5. Add a few drops of essential oils (3-4 drops) or home fragrances (3- 7 drops) to the water tank.
  6. Replace the inner cover and the outer cover on the diffuser.
  7. Plug the cable into the adaptor and into the appropriate outlet.

OPERATION

This diffuser has 3 function buttons on the front side:
ON/OFF – Middle button

  1. Press the ON/OFF button once to turn on the device, and start the continuous diffusion with color-changing light.
  2. Press a second time to turn the diffuser and light off.

Mist limer – Left button

The diffuser automatically switches on continuous diffusion without the timer.

  1. Press once to set the timer for 1 hour with continuous mist. The light flashes once for indication.
  2. Press a second time to set the timer for 2 hours with mist intervals of 30 seconds ON/OFF. The light flashes twice for indication.
  3. Press a third time to set a timer for 4 hours with mist intervals of 30 seconds ON/OFF. The light flashes three times for indication.

NOTE

  • Press again to start the same sequence as above.
  • To cancel the timer function, turn off the diffuser completely and then back on, using the ON/OFF button.

Light – Right button
The diffuser automatically switches on a color-changing light.

  1. Press the first time to fix the color of your choice when the color appears.
  2. Press a second time to switch off the light.
  3. Press again to return to color-changing mode.

REMARK
The diffuser can last up to 6 hours of continuous mist. When the water level becomes too low, it will stop misting automatically. To use the diffuser again, pour water into the water tank by following the “Preparation of the diffuser” steps.

MAINTENANCE

  • You are advised to change the water frequently in the tank and clean the diffuser every 3 days, particularly if you want to change the fragrance to be diffused.
  1. Turn off the appliance and unplug it.
  2. Remove the covers and empty the water on the opposite side of the air outlet. Do not empty the water in the air outlet, this would damage the diffuser.
  3. Clean the diffuser water tank using a soft damp cloth. If needed, use a little bit of white vinegar highly diluted. Do not use corrosive detergents. Gently and carefully rub the ceramic disc with a cotton bud and make sure to not scratch it.

TECHNICAL SPECIFICATIONS

  • Model#: NA-385 Paola
  • Input voltage: 100-240V
  • Input AC frequency: 50/60Hz
  • Output voltage: DC24V
  • Output current: 500mA
  • Output power : 12W
  • Ceramic disc lifespan: +/- 3000 hours
  • Tank capacity : 150 ml
  • Dimensions (approx): 115x165mm
  • Recommended for a surface of: 30m2

TROUBLESHOOTING

Status Possible cause(s) Solution(s)

Start-up Failure/ Early Shutdown

| ****

1. Insufficient water.

2. Improper power wire connection.

| ****

1. Fill water to the max. water level indicator.

2. Unplug the power adapter plug and reset


Failure or abnormality missing but the light is working

| ****

1. The water exceeds the maximum level line.

2. Impurities on the mist plate (dust, oil residues…)

3. The air inlet is blocked.

| 1. Empty the excess water carefully to the max level line.

2. Refer to the “Maintenance” part for cleaning the mist plate.

3. Make sure nothing is blocking the air inlet located at the bottom of the diffuser. The device must be placed on a flat and hard surface.



Water Leakage

| 1. Inner and outer covers are off-rentered.

2. High humidity temperature too low/ too high in the room.

| ****

1. Adjust the top cover and inner cover to make sure they are properly aligned.

2. Adjust the room temperature or humidity.

  • This product must be collected by a specialist service and must not be disposed of with household waste.

  • Compliant with European standards.

  • Green Delta Ltd r/o SEDIS Logistics,

This appliance complies with the below-listed UK Directives

  • Electromagnetic Compatibility Regulations 2016
  • Electrical Equipment (Safety) Regulations 2016
  • Ecodesign for Energy-Related Products Regulations 2010
  • The Restriction of the Use of Certain Hazardous Substances in Electrical and
  • Electronic Equipment Regulations 2012
  • This complete declaration of conformity is available upon request for relevant inquiries

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals