SOLTECH ORINDA PRO Solar Decorative Area Light Instruction Manual

July 9, 2024
SOLTECH

ORINDA PRO 25W Dual-heads
DECORATIVE AREA LIGHT
SOLTECH ORINDA PRO Solar Decorative Area Light - Cover Instruction Manual

ORINDA PRO Solar Decorative Area Light

INTRODUCING SOLTECH ORINDA PRO: ORINDA PRO solar light efficiently illuminates outdoor spaces like parking lots, pathways, and parks. This solar light fixture provides 360-degree glare-free, beam-styled lighting. Powered by renewable solar energy, ORINDA is a stand-alone, off-grid pathway light with zero operational costs. ORINDA’s elegant design makes it ideal for decorative commercial lighting.
The ORINDA high-powered LED solar lighting system comes complete with solar power assembly, fixture, bracket, and all mounting hardware to attach to a pole. SOLTECH can also provide a pole to meet wind load specifications.SOLTECH ORINDA PRO Solar Decorative Area Light - Product
Overview 2

  • Easy installation and operation
  • Cold-weather battery withstands frigid climates up to -40°C/-40°F
  • Remote control included with one-button mode setting
  • 180lm/W–highest efficiency in the industry
  • Built-in MPPT controller with microwave motion sensor
  • Adjustable angle for the solar panel allows maximum solar collection
  • Zero Electric Bills. No trenching or disturbing surrounding Areas
  • Marine grade aluminum & stainless steel fasteners for harsh environments
  • Full self-charging time less than 11 hrs

APPLICATIONS

The ORINDA is a complete solar system used for areas such as pathways, parking lots, landscaping, parks, schools, trails, or any remote locations that have no access to conventional power.
The ORINDA fixture is an efficient decorative bell-style fixture and provides great light output. This fixture works best for applications with a mounting height of 15′ to 25′.

LIGHT FIXTURES LED

LED Nominal Power 25W X 2
Lumen 9,000LM
Color Temperature 3,000K I 4,000K
Optic Type Type II I Type III
Efficiency@5,000K 180LM/W
Material Die-Cast Aluminum

BATTERY

Operating Temperature -40°C/-40°F to 140°F
Charging Temperature -40°C/-40°F to 140°F
Capacity 640WH
Operating Voltage 12.8V
Charging Time 11 Hrs
Run Time @ Full Power 12–14 Hrs

SOLAR PANEL

Power 115W
Operating Voltage 18V
EPA @ 45° 9.5

MAXIMUM AUTONOMY

Motion Sensor Mode| 40%–100% 32hrs
20%–80% 55hrs
---|---
Time Control Mode| Night Owl 28hrs
Early Bird 25hrs
Constant Mode| 100%  13hrs
70%  19hrs
40%  34hrs

  • The temperature can impact the battery’s charging and normal operation. If your place’s temperature is under 32°F, we advice you to use the SUNLIKE PRO version to achieve better lighting results.
  • The solar charge time data is base on 77 degree F ambient temperature with the panel pointed directly at the solar radiation. The standard radiation value is 1000W/m2.

IES/ BEAM

ORINDA PRO 25W DUAL-HEADS TYPE III [ MOUNTING HETGHT 20FT ]

SOLTECH ORINDA PRO Solar Decorative Area Light - IES BEAM
1

ORINDA PRO 25W DUAL-HEADS TYPE II [ MOUNTING HETGHT 20FT ]

SOLTECH ORINDA PRO Solar Decorative Area Light - IES BEAM
2

ORINDA PRO 50W

SOLTECH ORINDA PRO Solar Decorative Area Light - ORINDA PRO
50W

Weight Information
Battery and Solar Panel: 48lbs
Solar Lamp: 12lbs/each
Mounting Bracket: 6lbs

INSTALLATION ACCESSORIES

SOLAR PANEL SLIP FITTER

POLE TENON ADAPTER DIAMENTION
Tenon adapter IS NOT included in the package, please contact the pole manufacturer for the details.

ORDERING INFORMATION

SERIES| WATTAGE| OPTIC TYPE| COLOR
TEMPERATURE| MOUNTING
OPTIONS| FINISH
---|---|---|---|---|---
STLORNPRO=
ORINDA PRO| 25D=25W
Dual-Heads
9,000 LUMENS| T3=TYPE III| 3=3000K
4=4000K| SF=SLIP FITTER| GR=GREEN (RAL 6012)
BK=BLACK (RAL 9004)

SOLTECH ORINDA PRO Solar Decorative Area Light - ORDERING INFORMATION
1

WARRANTY

ORINDA PRO products are covered by a 5 year limited warranty. SOLTECH urban light warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 5 years from date of purchase. To obtain warranty service please contact your local distributor or sales rep for further instruction.

PANEL ANGLE GUIDE

The solar charge in a battery pack won’t last forever. The off–grid system relies on stored solar energy for autonomy. Angling your solar panels properly can boost the power intake of your solar lighting system. You want to angle your solar panels at a tilt based on the area’s latitude.

SOLTECH ORINDA PRO Solar Decorative Area Light - PANEL ANGLE GUIDE
1 SOLTECH ORINDA PRO Solar
Decorative Area Light - PANEL ANGLE GUIDE 2

DETECTION ZONE

SOLTECH ORINDA PRO Solar Decorative Area Light - DETECTION ZONE
1

BEST FACING DIRECTION OF SOLAR PANEL
The area will dictate the installation of the fixtures and will sometimes prevent the lights from facing south. But that’s okay! Panels facing West & East won’t get as much light as Southern facing panels, but will still collect a good amount of sunlight. A North facing panel also works, but it will take longer to charge than any other direction. This would mean that the solar charge will be less optimal if installations are facing North.

REMOTE CONTROLS

SOLTECH ORINDA PRO Solar Decorative Area Light - REMOTE CONTROLS
1

The range of the remote control to the indicator is 16ft (Day time) to 33ft (Night time). Because the sunlight will impact the signal of the remote control, we suggest our users to setup the mode before they install the light.

  1. On/Off
    When off is selected, the light will stop working. The solar panel will not charge the battery and the battery will not supply electricity to the light.

  2. Connect/Test
    Remote control device can be connected with any lighting fixture, one at a time. To connect, press the button once. It also functions as a test button. To test, press the “Test”  button once, the red light will indicate the fixture is charging, green light indicates that the fixture is operating.
    Testing lasts for 10 seconds, and then it goes back to the mode previously in use.

  3. 40%~100% Motion Sensor Mode
    Constant 40% brightness (turns on at dusk, turns off at dawn); 100% brightness turns on for 2 minutes when motion is detected.
    1. On/Off
    When off is selected, the light will stop working. Solar panel will not charge battery, battery does not supply electricity to the light.
    2. Connect/Test
    Remote control device can be connected with any lighting fixture, one at a time. To connect, press once. It also functions as a test button. To test, press the “Test” button once, the red light will indicate the fixture is charging, green light indicates discharging. Testing lasts for 10 seconds, then goes back to the mode previously in use.
    3. 40%~100% Motion Sensor Mode
    Constant 40% brightness (turn on at dusk, turn off at dawn); 100% brightness turns on for 2 minutes when motion detected.

  4. 20%~80% Motion Sensor Mode (Default)
    (IAP) Intelligent Adaptive Program Battery Control Technology

    In order to extend the off-grid autonomy of the ORINDA under shady trees, heavy rain, and thick clouds, our controllers now integrate an adaptive smart control feature to actively track battery capacity and adjust light output accordingly. Before integrating this feature, selecting a light output percentage on the remote would yield an accurate percentage of max LED brightness. Now with (IAP), the controller actively monitors the battery and regulates the electrical current to the LEDs. The controller makes light output of the selected percentage on the remote relative to battery capacity rather than max LED output.
    This smart-control feature can increase our off-grid performance by up to 40%.
    Important
    Dusk and dawn time may be diffrent in other locations and seasons.
    The sensors of our products will follow the light patterns of where it is installed. The time period shown in the chart above is just an example to help you understand the different lighting modes only.

  5. 100% Constant Mode
    100% brightness from dusk to dawn.

  6. 70% Constant Mode
    70% brightness from dusk to dawn.
    SOLTECH ORINDA PRO Solar Decorative Area Light - REMOTE CONTROLS
8

  7. 40% Constant Mode
    40% brightness from dusk to dawn.

  8. Timer Mode Disabled
    Press this button to turn off Timer Mode; settings revert back to before
    Timer Mode was last activated.

  9. Timer Mode 4 Hours
    This is an additional mode which can work with any other modes.
    For example: press this button at any time after you turn on 70% Constant Mode. If the light turns on at 7pm at dusk, it will turn off at 11pm. It will repeat the same schedule hereafter until it is canceled by pressing Timer Mode Disabled.

  10. Time Mode 8 Hours
    This is an additional mode which can work with any other modes.
    For example: press this button at any time after you turn on 70% Constant Mode. If the light turns on at 7pm at dusk, it will turn off at 3am. It will repeat the same schedule hereafter until it is canceled by pressing Timer Mode Disabled.

Important
Dusk and dawn time can vary for different locations and seasons.
The sensors in our products will monitor the light levels where it is installed. The time period shown in the chart above is just an example to help you understand the different lighting modes.

SOLTECH LLC reserves the right to update all product data sheets at any time. Consult SOLTECH marketing specialists for publication updates at hello@soltechlighting.com
Copyright©2018–2024 SOLTECH LLC, All Rights Reserved.

soltechlighting.com | hello@soltechlighting.com | 510-891-1056 | 1460
Park Avenue. Emeryville, CA 94608

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals