SOLTECH Cegonia 30W Solar Elegant LED Light Instruction Manual

: June 6, 2024
: SOLTECH

Table of Contents

Introduction
**CEGONIA PRO 30W
CEGONIA PRO 30W Type III
Battery Notes
Installation and Wiring Compliance
Mounting Accessories
Installation
- CEGONIA PRO 30W
Panel Angle
Remote Control Guide
Documents / Resources

CEGONIA
30W Installation Manual
SOLTECH Provides Advanced LED
Technology Powered With Eco-friendly,
Clean, Solar Energy.

Introduction

Thank you for purchasing CEGONIA PRO Urban Lighting Products.
Introduction CEGONIA PRO combines stylish design with high efficiency. You can adjust the tilt angle and the azimuth to make sure the panel is in the optimal position to capture the sun’s energy. It is a perfect fit for courtyards, parks, schools, communities, and paths.

Important
In order to avoid deep discharge of the battery during storage, please fully recharge your battery every 4 months. Please make sure that the light is installed in an area with sufficient sunlight irradiance. A strict minimum of 3.5 hours/day of sunshine on average is recommended. Select the right operating mode according to the local legislation needs and the local sunshine conditions. Keep it away from shadows. Self-cleaning is available when the light fixture has a minimum angle of 15 degrees.
Please save these instructions. Read all of the instructions carefully before attempting to carry out any installation or wiring. Do not open or attempt to repair the product on your own, as it may cause serious damage and would void the product warranty. Contact your local distributor for any questions concerning the installation.

The range of the light module on the lighting fixture is 20–26 feet (6–8 meters). The ideal installation spacing is >16 feet(5 meters). When installing two or more lighting fixtures on one pole, select desired operating mode before installation. Interference can cause delay or malfunction when using the remote control to change operating modes after installation.

Precautions when working with solar panels
When the solar panel is exposed to sunlight, a voltage appears at the output terminals of the solar panel turning it into a source of electricity.
To avoid a shock hazard, make sure the solar panel is covered with an opaque (dark) later such as paper or cloth during the installation. Do not make contact with the terminals when the panel is exposed to sunlight or any other light source.

**CEGONIA PRO 30W

**

SOLAR PANEL: 9.9 Lbs
SOLAR LAMP: 13.6 Lbs
BATTERY ASSEMBLY: 25.9 Lbs

CEGONIA PRO 30W Type III

Battery Notes

Super Capacitor battery-powered CEGONIA PRO lights are visibly brighter than other outdoor solar lights, and their performance overall is more reliable.
To charge the battery fully may take up to 6 to 12 hours.
The rechargeable battery can work continuously for 10 hours at full power.
The output will be reduced to 40% when the battery is below 40% of its capacity.
The battery will stop charging when the ambient temperature is below -58°F or above 140°F.

Battery Status is indicated by the red/green indicator on the lighting fixture as follows:

Slow red light flashing (Every 2.5s) = Working
Slow red flashing (Every 5s)= Open circurt
Red light continuously on = Non-working
Quick red flashing (Every 0.5s)= Charge fault
Quick red flashing (Every 0.1s)= Over current or Short circurt
Storage
To avoid over-discharge of the battery during storage, please recharge the lighting fixture every 4 months. Use the dedicated charger to charge, and reset the switch when done.

(IAP) Intelligent Adaptive Program Battery Control Technology
In order to extend the off-grid autonomy of the CEGONIA PRO 30W under shady trees, heavy rain, and thick clouds, our controllers now integrate an adaptive smart control feature to actively track battery capacity and adjust light output accordingly. Before integrating this feature, selecting a light output percentage on the remote would yield an accurate percentage of max LED brightness. Now with (IAP), the controller actively monitors the battery and regulates the electrical current to the LEDs. The controller makes light output of the selected percentage on the remote relative to battery capacity rather than max LED output. This smart-control feature can increase our off- grid performance by up to 40%.

ATTENTION
The battery cannot be replaced on your own. Please conntact SOL TECH for any battery questions.

After connecting the wires between the solar panel and the light, CEGONIA PRO 30W will automatically turn on, and the indicator will begin flashing every 2.5 seconds. The light head will then turn on for 1 minute and then shut off again. It means the fixture is switching from open circuit mode to standard working mode.
If you wish to shut off the light, you must first cover the solar panel. Then press the off button on the remote. You can also just press the off button to turn off the lights during the night. When the solar panel detects light, the fixture will activate and resume normal operation again.

Installation and Wiring Compliance

Installation and wiring must comply with the State and National Electrical Codes.
The CEGONIA PRO 30W model is intended for outdoor use only and should not be installed in an unventilated area, and shall be installed in an environment within the operational temperatures defined for the product.
The average sunshine in the installation area should be above 3.5 hours/day in order to ensure the full functionality of the lighting fixture. Avoid areas with shades.
Before installation, if applicable, please ensure the light pole and its foundation are solid enough to withstand the lighting fixture(s).
Before installation, please ensure that the battery is fully charged. Install during sunny days if possible.
Before installation, please press the ON/OFF key in the remote control and check whether it shows a red light on the indicator. Please cover the panel and check if the light module turns on normally within 1 minute.

After Installation
The lighting fixture will automatically turn on at night and turn off during daylight.
Important
Always orient the solar panel facing the equator (e.g. facing south if in the northern hemisphere).
Always have a tilt angle of at least 15° to avoid dust accumulation (0°=horizontal plane).

Ordering Information Chart

SERIES	WATTAGE	OPTIC TYPE	COLOR TEMPERATURE	MOUNTING OPTIONS	FINISH
STLSTEPRO=CEGONIA PRO	30=30W 6,000 Lumens	T2=TYPE II

T3=TYPE III
T4=TYPE IV| 3=3,000K
4=4,000K
5=5,000K
6=5,700K| WM=Wall Mount
TRR=Trunnion Round
TRS=Trunnion Square| GY=Gray
BR=Bronze

For example STLSTEPRO30T33WMBR
This means the customer wants a CEGONIA PRO 30 watt, 3000K CCT, Type III, Wall Mount installation, with a Bronze finish.
DO NOT send the sample number directly to our sales. Use the information in the chart above to create a model number with the correct series, wattage, temperature, mounting option, and finish for the product that you want.

Mounting Accessories

Installation

CEGONIA PRO 30W

Panel Angle

Remote Control Guide

On/Off
When off is selected, the light will stop working. The solar panel will not charge the battery and the battery will not supply electricity to the light.
Connect/Test
A remote control device can be connected to any lighting fixture.
When all cables are connected and the solar panel detects sunlight, the fixture will automatically turn on. To test, press the “Test” button once, and the LED light will turn on to indicate the fixture has been turned on. During the daytime, the indicator will slowly flash red. That means the battery is charging.
40%~100% Motion Sensor Mode
Constant 40% brightness (turns on at dusk, turns off at dawn); 100% brightness turns on for 2 minutes when motion is detected.
20%~80% Motion Sensor Mode (Default)
Constant 20% brightness (turns on at dusk, turns off at dawn); 80% brightness turns on for 2 minutes when motion is detected.
Night Owl Mode
Changes as natural light decreases/increases (turns on at dusk); 70% brightness for 0.5 hours, 100% brightness for 3.5 hours, 70% brightness for 1 hour, 50% brightness for 1 hour, 20% brightness for 5 hours (turns off at Dawn).
Early Bird Mode
Changes as natural light decreases/increases with increased brightness near dawn for early risers (turns on at dusk); 70% brightness for 0.5 hour, 100% brightness for 3.5 hours, 70% brightness for 1 hour, 50% brightness for 1 hour, 20% brightness for 4 hours, 100% brightness for 1 hour (turns off at Dawn).
100% Constant Mode
100% brightness from dusk to dawn.
70% Constant Mode
70% brightness from dusk to dawn.
40% Constant Mode
40% brightness from dusk to dawn.
Timer Mode Disabled
Press this button to turn off Timer Mode; settings revert back to before
Timer Mode was last activated.
Timer Mode 4 Hours
This is an additional mode that can work with any other modes.
For example: press this button at any time after you turn on 70% Constant Mode. If the light turns on at 7 pm at dusk, it will turn off at 11 pm. It will repeat the same schedule hereafter until it is canceled by pressing Timer Mode Disabled.
Time Mode 8 Hours
This is an additional mode that can work with any other modes.
For example: press this button at any time after you turn on 70% Constant Mode. If the light turns on at 7pm at dusk, it will turn off at 3am. It will repeat the same schedule hereafter until it is canceled by pressing Timer Mode Disabled.

(IAP) Intelligent Adaptive Program Battery Control Technology
In order to extend the off-grid autonomy of the CEGONIA PRO 30W under shady trees, heavy rain, and thick clouds, our controllers now integrate an adaptive smart control feature to actively track battery capacity and adjust light output accordingly. Prior to including this feature, selecting a light output percentage on the remote determined the constant percentage of max LED brightness. Now with (IAP), the controller actively monitors the battery and regulates the electrical current to the LEDs. The controller now applies the selected percentage output on the remote to the battery capacity, rather than the max LED output. This smart-control feature can increase our off-grid performance by up to 40%.

Important
Dusk and dawn times may be different in other locations and seasons. The sensors of our products will follow the light patterns of where it is installed. The time period shown in the chart above is just an example to help you understand the different lighting modes only.

Important
Dusk and dawn times can vary for different locations and seasons.
The sensors in our products will monitor the light levels where it is installed. The time period shown in the chart above is just an example to help you understand the different lighting modes.

CEGONIA PRO products are covered by a 5-year limited warranty. SOLTECH urban light warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 5 years from the date of purchase. To obtain warranty service please contact your local distributor or sales rep for further instruction.

1460 Park Avenue.
Emeryville, CA 94608 USA
www.soltechlighting.com
SOLTECH LLC reserves the right to update all product data sheets at any time. Consult SOL TECH marketing specialists for publication updates at
hello@soltechlighting.com
Copyright©2021–2022 SOLTECH LLC,
All Rights Reserved.
018

SOLTECH Provides Advanced LED Technology Powered With Eco-friendly, Clean, Solar Energy. 020