Danfoss 013G5287 Redia RTD Thermostatic Sensors Installation Guide
- June 12, 2024
- Danfoss
Table of Contents
Danfoss 013G5287 Redia RTD Thermostatic Sensors
Product Information
The product is a code number 013G5287 Blind mark. It is designed to be installed following the instructions provided in the user manual.
Product Usage Instructions
- Installation Guide
- Follow the steps provided in the installation guide.
- Refer to the code number 013G5287 Blind mark for accurate installation.
- Ensure that the torque applied during installation is 15Nm.
- MAX
- Set the product to the maximum level.
- Refer to the example given for setting MAX, which is 4.
- MIN
- Set the product to the minimum level.
- Refer to the example given for setting MIN, which is 3.
Note: For any additional information or troubleshooting, please refer to the AN448535227958en-000101 user manual.
Installation
Temperature Limitation
Theft protection
Blind mark
Danfoss A/S
Climate Solutions
Web: danfoss.com
Tel: +45 7488 2222
Any information, including, but not limited to information on selection of
product, its application or use, product design, weight, dimensions, capacity
or any other technical data in product manuals, catalogues descriptions,
advertisements, etc. and whether made available in writing, orally,
electronically, online or via download, shall be considered informative, and
is only binding if and to the extent, explicit reference is made in a
quotation or order confirmation. Danfoss cannot accept any responsibility for
possible errors in catalogues, brochures, videos and other material.
Danfoss reserves the right to alter its products without notice. This also
applies to products ordered but not delivered provided that such alterations
can be made without changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/S or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All
rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>