Honeywell ARA-10 Agent Release Alarm Pull Station Instruction Manual
- June 9, 2024
- Honeywell
Table of Contents
Honeywell ARA-10 Agent Release Alarm Pull Station
GENERAL
The Fire • Lite AR Series of Agent Release Manual Stations is designed for use with the Sensis can 2000 and MRP-4424 Agent Release Control Panels. Based on the popular BG-10 Series of Manual Fire Alarm Stations, the AR Series provides dual-action, normally open contact, release initiating points. The ARA-10 also includes a manual abort switch, System Activated (release) LED and System Normal LED.
FEATURES
-
Impact-resistant, durable LEXAN® (or polycarbonate equivalent) housing.
-
Backplate made of 16 gauge steel.
-
Highly visible.
-
Easily operated (within ADA 5 lb. pull force when used without break tube models manufactured after 10-1- 96, identified by an ⊕ under station spring).
-
Attractive shape with textured finish.
-
ARA-10 includes:
✔ Manual release, dual-action.
✔ Manual abort switch.
✔ System Activated (release) LED.
✔ System Normal (power-on) LED. -
AR-10F includes:
✔ Manual release, dual-action only
APPLICATIONS
The AR Series agent release manual stations are intended for use as release initiating devices with Fire • Lite’s Sensiscan 2000 and MRP-4424 agent release control panels. These stations are ideally suited for areas such as clean rooms and computer rooms, where a chemical agent is used to extinguish a fire. The AR Series stations should be installed in compliance with applicable NFPA standards, local building codes, and plans and specifications.
INSTALLATION
The AR-10F agent release manual station mounts to a standard single-gang electrical box or SB-10 surface-mount box. The ARA-10 requires a custom backbox for mounting model SBA-10. A terminal block with screws is provided for fast and easy wiring of the agent release circuit.
LEXAN® is a registered trademark of GE Plastics, a subsidiary or General
Electric Company.
OPERATION
Pulling the handle down causes the AR Stations to latch in the down position and to close the normally open release circuit switch. The handle is restored manually by unscrewing the allen-head screw so the top of the case can pivot forward, allowing the spring-loaded handle to return to its normal position. The case can then be pivoted back to its normal position and secured with the allen-head screw.
PRODUCT LINE INFORMATION
AR-10F Agent Release Manual Station, dual action. Includes terminal block
with screws for fast and easy wiring of agent release circuit.
ARA-10 Same as above with manual abort switch, System Activated (release)
LED and System Normal (power-on) LED.
SB-10 Surface-mount backbox for AR-10F.
SBA-10 Surface-mount backbox for ARA-10.
WIRING for the ARA-10
*NOTE: Mount ELR on the last unit.
Customer Support
Technical Manuals Online! –http://www.tech-man.com
This document is not intended to be used for installation purposes. We try
to keep our product information up-to-date and accurate. We cannot cover all
specific applications or anticipate all requirements. All specifications are
subject to change without notice. For more information, contact Fire Lite.
Phone:203-484-7161 FAX:
203-484-7118 **12 Clintonville Road,
Northford, Connecticut 06472
ISO-9001
Engineering and Manufacturing
Quality System Certified to
International Standard ISO-9001
firealarmresources.com**
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>