SOLTECH HYPER 25W 45W LED Solar Area Light Instruction Manual
- June 1, 2024
- SOLTECH
Table of Contents
HYPER 25W I 45W
LED SOLAR AREA LIGHT
Instruction Manual
HYPER 25W 45W LED Solar Area Light
- All-in-one design
- Easy installation and operation
- Remote control included with one-button mode setting
INTRODUCING SOLTECH HYPER: an economical, easily installed, off-grid solar light that reduces the total cost of ownership and delivers big performance. This fully integrated LED solar streetlight is designed for both residential and commercial areas, with 5,000 and 9,000 lumen outputs. HYPER 25W and 45W provide superior quality light over a greater area. It features an integrated solar array, battery, and LED fixture with simple mounting for fast and easy installation. HYPER solar fixture eliminates trenching, cabling, and electricity costs.
- All-in-one design
- Easy installation and operation
- Grade A LifePO₄ Battery Pack, 2000+ full charging cycles
- Remote control included with one-button mode setting
- Lumileds LED chips boast industry-leading efficiency (>200lm/W)
- Built-in smart MPPT-IAP controller maximizes autonomy and performance
- Half-cut solar cells reduce energy loss and ensure high efficiency even in shaded areas
- Adjustable angle for the solar panel allows maximum solar collection
- 3 different mounting options designed for round pole, square pole, and wall pack applications
- Die cast A380 aluminum fixture housing is rust free
APPLICATIONS
Pathways, parking lots, landscaping, parks, schools, trails, or any remote locations that have no access to conventional power.
LIGHT FIXTURES
LED Nominal Power | 25W I 45W |
---|---|
Lumen | 5,000LM I 9,000LM |
Color Temperature | 3,000K I 4,000K I 5,000K I 5,700K |
Optic Type | Type III |
Efficiency@5,000K | 200LM/W |
Material | Die-Cast Aluminum |
BATTERY
Operating Temperature | -20°C/-4°F to 122°F |
---|---|
Charging Temperature | 0°C/32°F to 122°F |
Capacity | 27AH 345.6WH I 50AH 640WH |
Operating Voltage | 12.8V |
SOLAR PANEL
Rating Power | 60W I 94W |
---|---|
Size | 33.0″ X 16.0″ I 43.0″ X 19.0″ |
EPA | 4.6 I 7.1 |
MAXIMUM AUTONOMY
Motion Sensor Mode (Without grid power)| 40%–100% 35hrs
20%–80% 65hrs
---|---
Time Control Mode (Without grid power)| Night Owl 24hrs
Early Bird 21hrs
Constant Mode (Without grid power)| 100% 13hrs
70% 18hrs
40% 32hrs
IES/ BEAM
INSTALLATION ACCESSORIES
A. TRUNNION—Wall Mount
A-a. STLHYB-WM
B. SLIP FITTER B-b. STLHYB-SF
C. TRUNNION—Round D. TRUNNION—Square Round Pole Diameter Square Pole Dimension
DETECTION ZONE
BEST FACING DIRECTION OF SOLAR PANEL
The area will dictate the installation of the fixtures and will sometimes
prevent the lights from facing south. But that’s okay! Panels facing West &
East won’t get as much light as Southern facing panels, but will still collect
a good amount of sunlight. A North facing panel also works, but it will take
longer to charge than any other direction. This would mean that the solar
charge will be less optimal if installations are facing North.
ORDERING INFORMATION
SERIES| WATTAGE| OPTIC TYPE| COLOR TEMPERATURE|
MOUNTING OPTIONS| FINISH
---|---|---|---|---|---
STLHYP= HYPER| 25=25W
5,000 LUMENS
45=45W
9,000 LUMENS| T3=TYPE III| 3=3000K
4=4000K
5=5000K
6=5700K| WM=WALL MOUNT
TR=TRUNNION
SF=SLIP FITTER| GY=GRAY
(RAL 7038)
BR=BRONZE
(RAL 8019)
BK=BLACK
(RAL 9004)
WARRANTY
HYPER products are covered by a 5 year limited warranty. SOLTECH urban light
warrants to the original purchaser that this product is free from defects in
materials and workmanship for the period of 5 years from date of purchase. To
obtain warranty service please contact your local distributor or sales rep for
further instruction.
Distributed exclusively by Project Master in Costa Rica.
PANEL ANGLE GUIDE
The solar charge in a battery pack won’t last forever. The off–grid system relies on stored solar energy for autonomy. Angling your solar panels properly can boost the power intake of your solar lighting system. You want to angle your solar panels at a tilt based on the area’s latitude.
Key
World Wide Panel Angles
REMOTE CONTROLS
The range of the remote control to the indicator is 16ft (Day time) to 33ft (Night time). Because the sunlight will impact the signal of the remote control, we suggest our users to setup the mode before they install the light.
-
On/Off
When off is selected, the light will stop working. The solar panel will not charge the battery and the battery will not supply electricity to the light. -
Connect/Test
Remote control device can be connected with any lighting fixture, one at a time. To connect, press the button once. It also functions as a test button. To test, press the “Test” button once, the red light will indicate the fixture is charging, green light indicates that the fixture is operating. Testing lasts for 10 seconds, and then it goes back to the mode previously in use. -
40%~100% Motion Sensor Mode
Constant 40% brightness (turns on at dusk, turns off at dawn); 100% brightness turns on for 2 minutes when motion is detected. -
20%~80% Motion Sensor Mode (Default)
Constant 20% brightness (turns on at dusk, turns off at dawn); 80% brightness turns on for 2 minutes when motionis detected. (IAP) Intelligent Adaptive Program Battery Control Technology
In order to extend the off-grid autonomy of the HYPER under shady trees, heavy rain, and thick clouds, our controllers now integrate anadaptive smart control feature to actively track battery capacity andadjust light output accordingly. Before integrating this feature, selectinga light output percentage on the remote would yield an accurate percentage of max LED brightness. Now with (IAP), the controller actively monitors the battery and regulates the electrical current to the LEDs. The controller makes light output of the selected percentageon the remote relative to battery capacity rather than max LED outputThis smart-control feature can increase our off-grid performance by up to 40%. -
Night Owl Mode
Changes as natural light decreases/increases (turns on at dusk); 70% brightness for 0.5 hour, 100% brightness for 3.5 hours, 70% brightness for 1 hour, 50% brightness for 1 hour, 20% brightness for 5 hours (turns off at Dawn). -
Early Bird Mode
Changes as natural light decreases/increases with increased brightness near dawn for early risers (turns on at dusk); 70% brightness for 0.5 hour, 100% brightness for 3.5 hours, 70% brightness for 1 hour, 50% brightness for 1 hour, 20% brightness for 4 hours, 100% brightness for 1 hour (turns off at Dawn). Important
Dusk and dawn time may be diffrent in other locations and seasons.
The sensors of our products will follow the light patterns of where it is installed. The time period shown in the chart above is just an example to help you understand the different lighting modes only. -
100% Constant Mode
100% brightness from dusk to dawn.![SOLTECH HYPER 25W 45W LED Solar Area Light
-
Constant Mode](https://manuals.plus/wp-content/uploads/2024/05/SOLTECH- HYPER-25W-45W-LED-Solar-Area-Light-Constant-Mode.jpg)
- 70% Constant Mode
70% brightness from dusk to dawn.![SOLTECH HYPER 25W 45W LED Solar Area Light
- 70% Constant Mode
-
Constant Mode 2](https://manuals.plus/wp-content/uploads/2024/05/SOLTECH- HYPER-25W-45W-LED-Solar-Area-Light-Constant-Mode-2.jpg)
- 40% Constant Mode
40% brightness from dusk to dawn.![SOLTECH HYPER 25W 45W LED Solar Area Light
- 40% Constant Mode
-
brightness from dusk](https://manuals.plus/wp-content/uploads/2024/05 /SOLTECH-HYPER-25W-45W-LED-Solar-Area-Light-brightness-from-dusk.jpg)
-
Timer Mode Disabled
Press this button to turn off Timer Mode; settings revert back to before Timer Mode was last activated. -
Timer Mode 4 Hours
This is an additional mode which can work with any other modes. For example: press this button at any time after you turn on 70% Constant Mode. If the light turns on at 7pm at dusk, it will turn off at 11pm. It will repeat the same schedule hereafter until it is canceled by pressing Timer Mode Disabled. -
Time Mode 8 Hours
This is an additional mode which can work with any other modes.
For example: press this button at any time after you turn on 70% Constant Mode. If the light turns on at 7pm at dusk, it will turn off at 3am. It will repeat the same schedule hereafter until it is canceled by pressing Timer Mode Disabled.
-
Important
Dusk and dawn time can vary for different locations and seasons.
The sensors in our products will monitor the light levels where it is
installed. The time period shown in the chart above is just an example to help
you understand the different lighting modes.
SOLTECH LLC reserves the right to update all product data sheets at any time.
Consult SOLTECH marketing specialists for publicationupdates at
hello@soltechlighting.com
Copyright©2018–2024 SOLTECH LLC, All Rights Reserved.
I soltechlighting.com I hello@soltechlighting.com I 510-891-1056 I 1460 Park Avenue, Emeryville, CA 94608 I
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>