SOLTECH STL-SWL Solport Solar Powered Wall Pack Instructions

SOLTECH STL-SWL Solport Solar Powered Wall Pack

SOLPORT 7W 15W

APPLICATIONS

The SOLPORT is a solar-powered wall pack that can be easily installed onto nearly any surface using its mounting plate. With its integrated design, the SOLPORT is lower cost than traditional wall packs because there are no wiring costs or electricity costs when installing or using this fixture. With the sensor, the light can be programmed in a multitude of ways using the remote control.

DESCRIPTION

SOLPORT features an integrated design, with the solar panel and battery built into the LED fixture. There is no need to connect SOLPORT to line voltage, which eliminates the need for trenching, wiring, and electricity costs. It is ideal to light up outdoor wall mount applications in parking garages, entrances, public areas, schools, hospitals, hotels, and outdoor walkways that demand long service life and low maintenance. The fixtures have 3 operating modes that are programmable via remote control or on the fixture. SOLPORT will bring security and sustainability with no electric bills and low maintenance costs.

ORDERING INFORMATION

SPECIFICATION FEATURES

Adjustable LED Module Design

• The hinged LED module with the solar panel is adjustable to aim light at a target
• The solar panel blocks most glare for observer eye comfort
• Easy anti-theft installation

Longer Life

• Advanced new Li-ion battery lasts 500 charging-discharging cycles.
• 3 operating modes that are programmable via remote control or on the fixture.
• Long life battery lasts 3 nights with a one-day charge.

Integrated Design

• The easiest way to bring lighting to walls on any commercial building
• Integrates the solar panel, battery, sensor, and light fixture into one small form factor

Maximizes Solar Energy

• Adjust solar panel angle to maximize sunlight & allow snow to slide off

PRODUCT SIZE

SOLPORT 7W

SOLPORT 15W

SPECIFICATIONS

• The temperature can impact the battery’s charging and normal operation.
• The solar charge time data is based on 77 degrees F ambient temperature with the panel pointed directly at the solar radiation. The standard radiation value is 1000W/m2.

IES / BEAM

SOLPORT 7W

SOLPORT 15W

WALL MOUNT

Step 1

Step 2

Use a screwdriver to secure the mounting plate on the wall with screws.

Step 3

PANEL ANGLE

OPERATING MODES

On/Off
On/Off With the memory of the previous mode before shut off.

Constant Lighting Mode
The light will automatically turn on at dusk and remain at 50%brightness when the motion sensor is disabled. After 5 hours or when the battery capacity is below 30%, the light will switch to Mode 4.

Full Bright & Dim
The light will automatically turn on to full brightness when motion is detected within a range of 24 ft. It will turn off after 20 seconds when there is no motion detected. The bottom portion of the light will turn on automatically when the upper light turns off and will then turn off once motion is detected.

Full Bright & Off
The light will turn on to full brightness when motion is detected within a range of 24 ft. Once no motion is detected for 20 seconds, the light will turn off. The bottom portion of the light will not turn on in this mode.

WARRANTY

SOLPORT products are covered by a 3-year limited warranty. SOLTECH urban light warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 3 years from the date of purchase. To obtain warranty service please contact your local distributor or sales rep for further instruction.

Contacts

• 1460 Park Avenue. Emeryville, CA 94608 USA
• www.soltechlighting.com.

SOLTECH LLC reserves the right to update all product data sheets at any time. Consult SOLTECH marketing specialists for publication updates at hello@soltechlighting.com.
Copyright©2022–2023 SOLTECH LLC.

References

• Commercial Solar LED Lights | SOLTECH Smart Solar Lighting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>