HOME ACCENTS Holiday 8.5ft Giant Sized Color Changing LED Tree User Guide

8.5ft Giant Sized Color Changing LED Tree

Product Specifications:

• Product Name: 8.5 FT Giant-Sized Color Changing LED Tree
• Model Number: 24SV23800
• Power Adapter Input: 120V~60Hz
• Power Adapter Output: 5.9V 1.5A
• Wattage: 8.85W
• Bulbs: 68 (+3 spares)

Product Usage Instructions:

Parts List:

Refer to the following parts list when assembling the tree:

• * A. Base x 1

  • B. Trunk x 1

Assembly Steps:

Step 1: Base Assembly

Attach the Tree Support Frame (C) to the Base (A) using the
quick connect push button and secure in place.

Step 2: Adding Tree Segments

Slide Disks (G) over Support Poles (D, E, F) ensuring proper
orientation and cable connections.

Step 3: Finalizing Assembly

Complete the assembly by adding the Star (L) and ensuring all
cable connections are secure.

Frequently Asked Questions (FAQ):

Q: What should I do if I encounter issues with the

color-changing feature?

A: If you experience issues with color changes, ensure all cable
connections are secure and check the power adapter connections.

Q: How can I troubleshoot if a section of the tree is not

lighting up?

A: Check the cable connections for that section, make sure bulbs
are properly seated, and verify power adapter output.

USE AND CARE GUIDE
8.5 FT GIANT-SIZED COLOR CHANGING LED TREE

USA 1011183713 CAN 1001872353 Model 24SV23800

Questions, problems, missing parts? Before returning to the store, please have a copy of your receipt ready and email the SVI customer experience team (customerservice@svius.com) within 90 days of the date of
purchase or call Home Accents Holiday Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HOLIDAY (1-855-434-6543)
HOMEDEPOT.COM

PARTS LIST
A. Base x 1 B. Trunk x 1 C. Tree Support Frame x 1 D. Lower Support Pole x 1 E. Middle Support Pole x 1 F. Upper Support Pole x 1 G. Disks x 3 H. Tree Bottom x 1 I. Tree Middle x 1 J. Tree Upper x 1 K. Tree Top x 1 L. Star x 1 M. Bulbs x 68 (+3 Spares) N. Base Extensions x 4 O. Stakes x 4 P. Remote x 1 Q. Hex Wrench x 1 R. Adapter x 1
Power Adapter Spec Input: 120V~60Hz Output: 5.9V 1.5A Wattage: 8.85W

A

B

H

X68 PCS (+3 Spares)

N

M

IMPORTANT TIPS:
· Ensure that item’s adapter is plugged in at the Function Control Box and plugged in the wall · Ensure that the switch on the function control box is on the desired setting. · If not functioning properly (ex: LEDs don’t light up), ensure that cables are connected to their corresponding cable as shown in the instruction sheet. · Ensure that the floor or surface that the item sits on is flat and level.

D E

C

F

G

I

J

K

L

M6 hex wrench

O

P

(included)

R

Q

NOTE: Throughout the instructions, Right and Left are relative to the character.

NOTE: First attach the (C) Tree Support Frame to the (A) Base using the quick connect push button and pre-drilled hole. Then secure in place by rotating the screw on the (C) Tree Support clockwise.

1

2

B

C

Slide one of the (G)

Disks down over the

(D) Lower Support

G

Pole. Make sure the

side of the (G) Disk

with the smaller circle

and flat edge shape is

D

aimed upwards. Set

the hole of the (G) Disk

onto the prong

D

available on the (D)

Lower Support Pole.

BACK

LEFT
A

B A

RIGHT

FRONT

1.1

1.2

C 2.1

2.2
1/4

Cable pairs are color-coded to ensure proper color-matching connections.

NOTE: Set the

cable connec-

tions inside of the

(G) Disk so they

H

are not pinched

between the Tree

Segments.

G H

Connect cables as each (G) Disk and (H, I, J, K) Tree Segment is added.

NOTE: (H) Tree Bottom will only fit one way over the (G) Disk. Make sure to line up the shapes of the hole and (G) Disk correctly.
3.1

D G
3.2

Cable pairs are color-coded to ensure proper color-matching connections.

NOTE: Make sure to line up the shape of the hole in (I) Tree Middle with the (G) Disk.

NOTE: Set the cable connections inside of the (G) Disk so they are not pinched between the Tree Segments.
G
G I

I G

H H

5.1

5.2

1

2

G

Slide one of the (G)

E

Disks down over the

(E) Middle Support

Pole. Make sure the

E side of the (G) Disk

with the smaller circle

and flat edge shape is

aimed upwards. Set

the hole of the (G) Disk

onto the prong

D

available on the (E)

Middle Support Pole.

4.1

4.2

F E

F 6.1

Outer Box

6.2
2/4

G

1

2

F

Cable pairs are color-coded to ensure

J

proper color-matching connections.

Slide one of the (G) Disks down over the (F)

Upper Support Pole. Make sure the side of the

(G) Disk with the smaller circle and flat edge

shape is aimed upwards. Set the hole of the

I

(G) Disk onto the prong available on the (F)

Upper Support Pole.

7.1

Cable pairs are color-coded to ensure proper color-matching connections.
I

G
NOTE: Set the cable connections inside of the (G) Disk so they are not pinched between the Tree Segments.

J G
I

NOTE: Loosen and remove the screw at the top of the (F) Upper Support Pole.

NOTE: Make sure the hole of (J) Tree Upper lines up with the (G) Disk.
8.1
Cable pairs are color-coded to ensure proper color-matching connections.

F K

Add (K) Tree Top.
J

7.2

8.2

8.3

F K

While holding the (K) Tree Top in place,

replace the screw at the top of the (F)

Upper Support Pole and tighten. Do not

overtighten. Keep the wire connection at

the top accessible.

9.1

L

N

N

A

NOTE: Only 68 (M) Bulbs need to be installed. Install by pressing them firmly into place.

N N
Attach the (N) Base Extensions to the (A) Base using the available quick connect push buttons and pre-drilled holes. If setting up outside on soft ground, plunge the (O) Stakes through the (N) Base Extensions and into the ground for added stability.
O
O

O O

10.1

NOTE: Rotate the cap of the (R)

Adapter all the way onto the threading

ofifrmthlye

Function in place.

Control Box until it Do not overtighten.

is

A
10.2
YOUR 8.5 FT GIANT-SIZED COLOR CHANGING LED TREE IS NOW FULLY ASSEMBLED. PLUG IN AND TURN ON TO LET THE FUN BEGIN!

K

5.9V

Connect the cable at the top of (K) Tree Top to

the corresponding cable available from the (L)

Star. and tuck the excess cable into the (K)

Tree Top and (L) Star. Then firmly press the (L)

Star into (K) Tree Top and rotate.

9.2

B 9.3

R
ADAPTER

10.3
3/4

OPERATION INSTRUCTIONS:

1. Plug the power adapter into a standard power outlet and adjust the settings on the Function Control Box, located on the (H) Body, as desired. 2. Settings:

ON / MARCHE / ENCENDER TIMER / MINUTEUR / TEMPORIZADOR OFF / ARRÊT / APAGAR LED MODE/ MODE LED/ MODO LED

This switch mode will continuously operate the lights of the item.
In this mode, the lights of the item are activated for a 6 hour period and then deactivated for an 18 hour period. This cycle continues indefinitely until the setting is changed. This switch mode allows the item to be activated only if triggered by using a Step Pad or Try Me Button (Not Included). The item will operate for one activity cycle with each Step Pad or Try Me activation. Otherwise, the item will stay off. Light Functions: Warm White Steady, Warm White Flashing. Warm White Slow Fade, Multi Steady, Multi Flashing, Multi Slow Fade, Warm White/Multi Alternating and Warm White/Multi Slow Fade

NOTE: Make sure the waterproof cap is covering the Try Me receiver at all times when not in use.

Made in China Fabriqué en Chine Hecho en China

© Seasonal Visions International Limited All Rights Reserved Tous droits réservés
Reservados todos derechos

5.9V

ON

OFF

FN

Demo

WW Steady

WW Flashing

WW Slow Fade

MLT Steady

MLT Flashing

MLT Slow Fade

WW MLT SEQ

WW MLT CC

FCC ID: 2BEA3-23800 IC: 10335A-23800 Model: 24SV23800

1.5V AAA

1.5V AAA

Button ON OFF
FN Demo

This Remote Control allows one to change the settings of the 8.5 ft Giant- Sized Color Changing LED Tree from up to 20 ft away. The Remote Control has an indicator light that lets you know if its working.
NOTE: TIMER setting can only be chosen from the 8.5 ft Giant-Sized Color Changing LED
Tree Control Panel, not with Remote Control.
NOTE: Requires 2 x 1.5V AAA batteries (Included)

• You will need a small Phillips head screwdrivercNot included ). Locate the battery compartment on the product. Remove the battery compartment cover by using a small Phillips head screwdriver to unscrew the screw. After removing or installing the batteries, place the battery compartment cover into position, and secure the battery cover. If 8.5 ft Giant-Sized Color Changing LED Tree is being stored while not in use, please remove battery in Remote Control.

Function Description Switches Tree Lights On. Switches Tree Lights OFF. Also allows the item to be activated by using a Step Pad or Try Me Button (Not Included). The item will operate for one activity cycle with each Step Pad or Try Me activation. Otherwise, the item will stay off.

Toggles the function to the next light mode, listed below.

Switches through all different light modes, showing each for 10 seconds.

WW Steady (Warm White Steady) WW Slow Fade (Warm White Slow Fade) MLT Flashing (Multi Flashing) WW MLT SEQ (Warm White/Multi Alternating)

WW Flashing (Warm White Flashing) MLT Steady (Multi Steady) MLT Slow Fade (Multi Slow Fade) WW MLT CC (Warm White/Multi Slow Fade)

WARNING:
This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking hazard. Keep all plastic parts away from children. · Don’t climb or pull on product. · Don’t add to or modify product. · Assemble and place the product on level surfaces only. · Don’t push or tilt product. · Please assemble item according to instructions. · Children should be supervised by adults. Item should not be grabbed, as it becomes a
tipping hazard. · Please view all instructions carefully before assembling. Save this instruction sheet for
future reference.

CARE AND STORAGE INSTRUCTIONS
When not in use, store this product in its original packing. Keep away from heat and moisture.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna, Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAN ICES-003(B)/NMB-003(B)

IF LIGHTS DON’T WORK

WE SUGGEST AT LEAST TWO ADULTS
FOR ASSEMBLY

NO MOVING AFTER FULLY ASSEMBLED

LEVEL AREA ONLY

USE WEIGHTS ON THE BASE

1-855-434-6543

DO NOT PUSH OR TILT

DO NOT CLIMB OR PULL ON

DO NOT ADD TO OR MODIFY

DO NOT DISPLAY DURING STRONG WINDS

Questions, problems, missing parts? Before returning to the store, please have a copy of your receipt 1-855-HD- HOLIDAY(1-855-434-6543)

ready and email the SVI customer experience team (customerservice@svius.com) within 90 days of the date of purchase or call Home Accents Holiday Customer Service 8 a.m. – 7 p.m., EST,

HOMEDEPOT.COM

Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
4/4

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>