EVOCHEF EC Flip Automatic Dosa Printer Owner’s Manual

EVOCHEF EC Flip Automatic Dosa Printer

Dear Customer,
Congratulations on bringing home the EC Flip automatic dosa printer.
With_ the right mix materials modern manufacturing processes & quality standards, every EVOCHEF product adds zing to your kitchen.
The EC Flip is no exception.
Before you use the product, we urge you to read this user manual completely as it g_ives vital information on how to install, operate & care for your appliance.
lncase of any queries, please call 7550212474 or mail us at customercare@evochef.in
Happy dosa’ing, Evochef

IDENTIFICATION OF PARTS

After unpacking Evochef Dosa Printer, make sure that all the parts mentioned in the below diagram are present.

Part Names

1. Main Unit
2. Power ON / OFF button (B1)
3. Cooking Time selector (B2)
4. Thickness selector (B3)
5. Dosa quantity selector (B4)
6. Batter Tank
7. Food grade coated roller
8. Top cover**
9. Collecting Tray
10. Blade
11. Tank Lever/Lock
12. Supporting Rod

OPERATING PROCEDURE

Take dose machine from the box, wipe the roller outer surface area with a soft cloth.

1. Place the dosa machine on a flat surface & remove the top cover
2. Insert the power cord & switch ON the Power supply
3. Insert the blade properly into the provision provided on the dosa machine.
4. Fill batter upto the mark on the tank
5. Slide the batter tank into the tank lever
6. Lock the lever slot by turning them downwards
7. Place the collection tray as shown above
8. Press & hold the power ON/OFF button for 1 seconds until the panel light turns on
9. Rotate and press the “Dosa Quantity Selector (B4)”to confirm dosa quantity and adjust the “cooking time selector (B2)” based on the requirement
10. First LED blinks manual e_iflction is ready to Press the ‘”Dosa Quantity selector (B4 )” for manual ejection.
11. Second LED blinks add additional 10 seconds cooking time by pressing the”cooking time selector(B2)” (This process can be repeated 5 times periodically.
12. After dosa printing disconnect the power cord. Press the Lock and pull the blade holder to remove it.
13. Clean dosa print surface with a soft cloth. Hang the collecting tray on the support rod in the machine

BATTER PREPARATION CHART

Batter preparation ingredients, reference mixing ratio per kg (Approx.)

IMPORTANT TIPS
Before start the Dosa printer ensure the blade and tank inserted properly.

Do ‘S

• Place the appliance at a convenient height for easy operation.
• Ensure the appliance is operated in the specified voltage.
• Ensure proper ventilation during use.
• After usage, switch off the machine, clean the batter tank tip & disconnect the power cord.
• Allow the roller to cool down before cleaning it.
• Use a soft cloth or soft scrubber for cleaning.
• Clean the tip of the batter tank every time you refill the tank and every quantity selection.
• Clean the blade, main unit & batter tank periodically with a soft cloth.
• Kids and other challenged personnel (reduced physical, sensory or mental capabilities or lack of experience & knowledge) required supervision to operate the machine.
• Any difficulty in operating the machine, contact authorized service center or customer care.

Don’ts

• Do not operate the machine on the floor.
• Do not operate the machine without batter in the tank.
• Do not touch the roller while the appliance is in function.
• Do not pour water on the machine.
• Avoid using inside a closed room.
• Do not use the machine if the power cord is damaged and it must be replaced by the manufacturer, service agent in order to avoid a hazard.
• Do not contact with sharp points or edges in the power cord.
• Never use a steel scrubber as it will leave scratches on the roller.
• Never attempt to open or service the machine yourself. Contact customer care to schedule a service appointment.

TECHNICAL SPECIFICATION

• Product Automatic Dosa Printer
• Model EC Flip
• Voltage 23OV AC, 10, 5OHz
• Power  16OOWatts
• Rating 16OOWatts
• Protection Class- “I”
• Flexible Cord PVC Approx. 2 Meter Long with 1 O Amps molded 3 Pin plug

TROUBLE SHOOTINGS

•  Plug Not Properly Inserted.

| •  Check mains.

•  Insert Plug properly.

•  Unit does not start.|

• Blade not fixed. Indication : Dosa quantity 2nd LED blink with buzzer sound.
• Low voltage Indication : Dosa quantity 1st LED blink with buzzer sound.

|

• Insert the blade properly into the provision provided on the machine and reset the machine function.
• Check the SUpply Voltage.

• Waiting time for Dosa printing.| •  Over temperature. Indication : Thickness selector 3rd LED blink| •   Wait to reduce roller temperature.

• Improper Dosa print

|

• Batter not available in the batter tank.
• Cooked batter in the batter tank tip
• Over temperature

|

• Fill the batter in the tank required quantity.
• Clean the batter tank tip
• Wait to reduce roller temperature

•  Problem not listed.| ——–| •    Call customer care.

Contact Customer care immediately if you have a problem that is not listed of the above.

For assistance/ complaints contact customer care executive

EVOCHEF LLP
First Floor, Ramani yam Greeta Towers, Plot No. 96-99, 109 to 112, Developed Plot Estate, Perungudi OMR, Chennai – 600 096, Tamil Nadu, India.
E-Mail:
For customer care call : 75502 12474

FEATURES

• Food grade coated roller
• Easy cooking time control
• Quick select for dosa quality & thickness
• Automatic safety cut off function
• 700ml capacity detachable batter tank

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>