Monolith THX Certified Satellite Speakers (Pair) Compact Form Factor User Manual

Monolith THX Certified Satellite Speakers (Pair) Compact Form Factor

Specifications

• SPEAKER TYPE: Subwoofer
• BRAND: Monolith
• RECOMMENDED USES FOR PRODUCT: Home Theater, Gaming
• MOUNTING TYPE: Wall Mount
• SURROUND SOUND CHANNEL CONFIGURATION: 1.0
• DRIVERS: 4.5″ concentric drivers
• FREQUENCY RESPONSE: down to 80Hz
• TWEETER: 20mm silk dome tweeter
• ITEM WEIGHT: ‎10.25 pounds
• PACKAGE DIMENSIONS: ‎15.75 x 10.24 x 9.84 inches

Introduction

With a high excursion concentric driver and a small enclosure, the Monolith THX Certified Compact Satellite Speakers provide precise performance down to 80Hz. Due to the THX certification of the speakers, a powerful and accurate listening experience that is as close to the source as possible is guaranteed. It takes little time to set up the Monolith THX Certified Compact Satellite Speakers. For a wonderful movie or gaming experience, simply connect it to any multichannel receiver or amplifier and match it with a suitable subwoofer. The entire M518HT THX Certified 5.1 Home Theater System comes with these speakers, and you can add more satellite speakers to add more audio channels.

HOW TO MAKE THE SUBWOOFER SOUND DEEPER

• Take the distortion out.
• Open the low-pass filter and flatten the signal.
• Change the low-pass filter and subwoofer gain.
• The subsonic filter and bass enhancement can be adjusted.
• Sync the receiver volume and subwoofer volume.

HOW TO ADJUST SUBWOOFER SETTINGS

• Adjust the crossover before using the subwoofer.
• Power up the subwoofer and adjust the volume to your preferred level.
• If there is a phase control, adjust it.
• For your preferred sound, make a few little modifications to the stereo audio equalizer.

HOW TO ADJUST SPEAKER LEVEL

• Set the level on your receiver to 0dB.
• Your AV receiver’s System Setup menu can be found there.
• Go to the submenu for speaker configuration.
• Choose speaker level or the channel level (in some receivers you need to enable the test tone)
• Decide to use the Left speaker.

HOW TO MAKE THE SUBWOOFER LOUDER

• Place Your Subwoofers Appropriately.
• Tune the subwoofer properly.
• Change the phase and crossover settings.
• Utilize High-End Files.
• Cut down on electrical impedance.
• Sound-dampening resources should be included.
• Switch out the cables.
• Separate your floor’s subwoofer from it.

Frequently Asked Questions

What does THX Certified mean?

A worldwide recognized guarantee of unwavering quality, consistency, and performance is THX Certification. We combine art, technology, and the nuances of actual listening and watching situations to make sure that the finished products accurately convey the artist’s intent.

What use does the THX sound serve?

The THX “Deep Note,” which resembles a cross between a black MIDI glissando and a brown note, is one of the most famous audio logos in the world and denotes the highest audio standard for movies.

How are THX speakers created?

A THX-certified amplifier, receiver, or speakers, for example, in audio equipment, will reproduce sound at reference quality for a specific room size. Therefore, a THX-certified system will reproduce sound exactly as it was heard in the mixing studio if the components are configured properly.

How effective are Monoprice Monolith Speakers?

The Monoprice Monolith THX Certified Ultra speakers demonstrated that they are high-value overachievers ideal for immersive home theatre applications at this price point. They are not flawless, though.

The THX sound is how loud?

According to THX standard, a Pink Noise should produce 85dBSPL at the audience position at reference level (-20dBFS, the broadcast/professional reference level). This means that the theater’s sound system should be able to produce 115dBSPL without audible distortion, as you can see from the straightforward table below.

What is a suitable speaker dB?

In general, speakers should be tuned to a loudness between 70 and 80 db. Using a decibel meter, this can be determined. The positioning of the speakers, their separation, and the room’s acoustics are a few factors that affect this.

What decibels is the reference level?

The recommended headroom for peaks on the main channels is 20 dB, while the LFE channel should have 30 dB of headroom. The average reference level is around 85 db. Although most avrs typically output 75db during calibration, this level is not regarded as a standard listening level.

How loud should a subwoofer be in dB?

Ideally, you shouldn’t adjust your different channels by more than one or two dB using the receiver gain. If possible, avoid having your mains at +8 and your sub at -8. A little above or below zero is acceptable.

Why is dB either positive or negative?

In contrast, a negative dB indicates that you are softer than the threshold and a positive dB indicates that the sound is several times louder than the threshold. Furthermore, the context and environment of the circumstance affect 0 db.

What is the ideal location for a subwoofer?

The output of a subwoofer may rise if it is placed in the corner of a room, making the sub sound louder. See how it sounds by trying to position your subwoofer in a corner. If the corner is too distant from your listening location, it might not be a good alternative for your subwoofer depending on your floor space.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>