BULLET8TE Ip Camera User Guide

BULLET8TE Ip Camera

Product Specifications

• Brand: Bullet 8TE
• Design: Originality, Smart, and Beautiful
• Power Input: 12V/1A
• Wi-Fi Support: 2.4GHz only
• Maximum Camera Adjustment Angles: Horizontal 0 to 150 degrees,
• Vertical 15 to 20 degrees

Product Usage Instructions

Waterproof Terminal Connection
Ensure the waterproof terminal is securely connected to the camera for outdoor use.

Bracket Installation

1. Push the bracket in the indicated direction to disassemble it.
2. Securely install the bracket on the wall using screws with th UP logo facing up.
3. Insert the bracket upward and push in the opposite direction to lock it with the camera.

Cable Configuration

1. Set up router parameters and note SSID and password.
2. Connect the camera to the router using a network cable and power it on.
3. In the app, select Power Plug Camera >> Smart Camera(LAN) to add the device.
4. Ensure connection method is Wired network and reset the camera if necessary for auto-searching devices.

Frequently Asked Questions (FAQ):
Q: What should I do if my device has trouble connecting to Wi-Fi?
A: If your device struggles to connect to Wi-Fi, press and hold the reset button for 5 seconds to reset the device and try again.

What’s in the box

Consult the checklist below for all components.

Description

Waterproof Terminal Connection

Installation

Bracket Installation

1. Push the bracket in the direction shown to take apart.
2. Install the bracket to the wall with screws. Put the UP logo up.
3. Insert the bracket upward and then push the bracket in the opposite direction of step 1, to lock the bracket with the camera.(Optional) You can adjust the camera horizontally or vertically by manual. It is recommended to adjust camera horizontally between 0 to 150 degrees, and vertically between 15 to 20 degrees. You can also rotate the bracket from 0 to 360 degrees.

Connection

Download
CloudEdge is available for both iOS and Android OS. Search the name ‘CloudEdge’in App Store or Google Play, or scan the QR-Code to download the App.

Add device
Log in the CloudEdge, select “Add Device”, and add the smart camera to the App according to the screen tips(Make the smart camera close to the router when configuring).

NOTE: If you need to re-select the WiFi network, please press and hold the “RESET” button for 5 seconds, the device will restart, and the indicator will be flashing red.

Set up router
The device only supports 2.4GHz Wi-Fi Ensure you have the SSID and password

Note: The length of the Wi-Fi SSID and password should not exceed 24 characters
If your device has trouble connecting to the Wi-Fi network, o「if you wish to switch networks, press and hold the RESET button for 5 seconds to reset the device

Registration

1. Step 1 Open the App, click “Sign up now” to register. If you already have an account, click “Log in” to log in.
2. Step 2
   Input a legal Email address and check the privacy agreement. Then enter the nickname and password.

Add Device

1. Pair device to the App
   Pairing method 1

   • Enable Bluetooth on your phone
   • In the App, tap Add Device or+> Add Device. The device will be searched for via Bluetooth and appear on the screen. Follow the on-screen instructions to complete pairing.

Note: If the device is not in the red slow flashing after 30 seconds of turing on, press and hold the reset button for 5 seconds to reset, and then restart to pair the camera with the App

Cable Configuration

1. Set up the parameters of router firstly and then record the SSID and password of your Wi-Fi. Make sure the Wi-Fi is stable and fluent.
2. Connect your smartphone to the Wi-Fi.

Note

• Please consider the installation position of camera before selecting a router which also provides Wi-Fi for your smartphone, because the camera have to be connected to the router by network cable.
• Camera only supports 2.4GHz Wi-Fi network.
• The number of bits in the SSID and passwords of the router should not exceed 24 digits.

1.  Take out the camera, the adapter and the prepared network cable.
2.  Connect the camera to the router via the network cable.
3. Power on the camera via adapter.
   Click “Add Device” or “+”, and then select “Power Plug Camera” >> “Smart Camera(LAN)” to add device.

• Power on the device.
  Make sure that connection method is “Wired network”.

• Reset the camera until the status indicator is flashing quickly and a prompt tone is heard.
  Click “Next” and the devices on the same network segment will be auto searched.

• 6 In the device adding list, select the device you need and then tap “+”.

• When connecting, you should make sure your router, mobile, and camera are on the same network segment.

  • When camera added successfully, click “Next”. And you can select family and room, or click ” ” to DIY the camera’s name.

• Click the added device icon, and then you can enter live view interface. In live view interface, click ” and you can set up the parameters of common functions.

Functions

• Video flip
  Flip your video stream up or down for maximum flexibility.

• Motion detection
  Support smart motion detection. The camera will detect movements, and then send you push notifications and app alerts.

• Record
  Support 24H continuous recording with high capacity SD storage or Cloud storage

• Full color vision
  With white light, the captured pictures and videos of motion detection are colorful which can provide you a better vision.

• RJ45
  Support power supply and data transmission through the Ethernet, which is much safer for camera using and is more flexible for wires arrangement

• Day & Night
  Never miss a moment, even in complete darkness, with powerful night-vision technology.

FAQ

• Q: The device cannot be previewed properly?
  A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.

• Q: Why is it still in the list of devices after reseting?
  A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.

• Q: How to cut the camera network to another router?
  A: First remove and reset the device on the App and then configure the device again by the App.

• Q: Why doesn’t the device identify the SD card?
  A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the Internet environment is not good.

• Q: Why I can’t get the notifications with my cell phone App?
  A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaranteethat interferencewill notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by oneor more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connectthe equipment into an outlet on a circuit different from thatto whichthe receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

RF EXPOSURE WARNING
FCC Radiation Exposure Statement: This device complies with FCC radiation exposure limitsset forth for an uncontrolled environment and italso complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may notcause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Battery Safety

1. Our Yourdevice contains a rechargeable lithium-ion battery and should be replaced only by a qualified service provider Do not disassemble, open, crush, bend, deform, puncture, shred or attempt the battery in your device
2. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, expose fire, explosion or other hazards.
3. Do not use a battery if its case appears damaged, swollen, or compromised. Examples include, but are not limited to, leaking, odors, dents, corrosion, rust, cracks, swelling, melting, and scratches.
4. Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply with local ordinances or regulations. © 2024. All rights reserved. All trade names are registered trademarks of respective companies Apple, the Apple logo, and iPhone are trademarks of Apple Inc. registered in the U.S. and other countries.

Google, the Google logo, Android are trademarks of Google Inc. App Store is a service mark of Apple Inc. Google Play is a service mark of Google Inc.

Power Adapter Safety

1. The power plug is intended to serve as a disconnect device Do not drop or cause an impact to the power adapter.
2. If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to elect or fire.
3. Do not touch the device or the power adapter with wet hands. Doing so may lead to short circuits, malfunctions, or electric shocks

Child’s Safety

1. Comply with all precautions with regard to child safety. Letting children play with the device or its accessories may be dangerous.
2.  The device and its accessories are not intended for use by children. Children should only use the device with adult supervision

Operation Requirements

1. Use the device under allowed humidity and temperature conditions.
2.  Do notaim the device at strong sources (such as lamplight, and sunlight) when focusing it, to avoid reducing the lifespan of the CMOS sensor, and causing over brightness and flickering
3. Observe local laws and regulations, and respect the privacy and legal rights of others.

Industry Canada (ISED) Compliance Statement

This device complies with Industry Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1.  This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and camnliancol

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>