Lilliput 2X7 Inch HDMI and 3G-SDI Rack Mount Monitor User Manual
- July 8, 2024
- LILLIPUT
Table of Contents
2X7 Inch HDMI and 3G-SDI Rack Mount Monitor
“`html
Specifications:
- Display Type: LCD
- Screen Size: Varies
- Resolution: Varies
- Inputs: HDMI, SDI, USB
- Power Input: DC 12V
Product Description:
The product is a high-definition monitor designed for
professional use. It features various input options including HDMI,
SDI, and USB. The front housing includes control buttons for
adjusting settings such as brightness, contrast, saturation, tint,
and sharpness.
Usage Instructions:
1. Safety Instructions:
Before using the product, please read the User Guide provided.
Keep the User Guide for future reference.
2. Cautions:
-
Do not place the display screen towards the ground.
-
Avoid heavy impact or dropping the product.
-
Do not use chemical solutions to clean the product; wipe with a
clean soft cloth. -
Do not block any vent hole.
-
Follow instructions for adjustments; improper adjustments may
result in damage. -
Unplug the power during long-term no-use or thunder
weather.
3. Menu Setting:
3.1 FN User-Definable Function Button:
Press the FN button to access default options. Use the up/down
buttons to adjust values. Long press the FN button for 3-5 seconds
to access shortcut menu options.
3.2 Menu Operation:
To access the menu, press the MENU button on the device.
Navigate through sub-menus using the up/down buttons. Press MENU to
confirm a selection and EXIT to return to the main menu.
3.2.1 Picture Settings:
- Brightness: Control brightness between 0-100.
- Contrast: Adjust contrast ratio between 0-100.
- Saturation: Modify color intensity between 0-100.
- Tint: Adjust tint between 0-100.
- Sharpness: Control image sharpness between 0-100.
FAQ:
Q: Can I use chemical solutions to clean the product?
A: No, please do not use chemical solutions to clean the
product. Wipe with a clean soft cloth to maintain brightness.
Q: What should I do if the display screen faces the
ground?
A: Please do not place the display screen towards the ground to
avoid damage.
“`
IMPORTANT SAFETY INSTRUCTIONS:
Please read User Guide before using this product. Please keep User Guide for
future reference.
FEATURES:
160° Wide viewing angles; High resolution: 1920×1200; High brightness:
400cd/m2; High contrast: 2000:1; Faster response time; TALLY interface with
indicating light; Firm & thin design.
CAUTIONS:
1. Please do not place the display screen towards the ground. 2. Please avoid
heavy impact or drop onto the ground. 3. Please do NOT use chemical solutions
to clean this product. Please wipe with a clean soft
cloth to maintain the brightness of the surface. 4. Please do not block any
vent hole. 5. Please follow the instructions and trouble-shootings to adjust
the product. Other improper
adjustment may result in damage. Any further adjustment must be performed or
conducted by a qualified technician. 6. Please unplug the power if long-term
no-use, or thunder weather.
2
Contents
1. PRODUCT DESCRIPTION ………………………………………………………………..4 2. MENU SETTING
……………………………………………………………………………5 3. PARAMETERS……………………………………………………………………………….15
4. ACCESSORIES ……………………………………………………………………………..16 5. 3D LUT Loading Demo .
…………………………………………………………….17 6. Remote Terminal Instructions
………………………………………………………20 7. TROUBLE SHOOTING …………………………………………………………………..22
3
1. PRODUCT DESCRIPTION
Front Housing
1. Earphone 2. MENU: To activate OSD (on-screen display) menu. Press ” / ”
button to switch among the
picture, marker, function, waveform, audio, system. 3. Left selection button:
to select item on OSD menu and adjust its value; Press to decrease
the value of brightness, sharpness, contrast, saturation and Tint. 4. Right
selection button: to select item on OSD menu, adjust its value and confirm it;
Press to
increase the value of brightness, sharpness, contrast, saturation and Tint.
Note: When press or ” button, then press MENU button, it will activate user-
definable menu OSD(Brightness, Contrast, Saturation, Sharpness, Volume, Back
light, Peaking Level). User can select the shortcut item based on different
demand. Volume is default. 5. EXIT 6. FN: Customized Function button; to
launch function menu quickly. Peaking as default. 7. INPUT: circularly switch
among of HDMI, SDI. 8. POWER on/off button 9. Power indicator light Back
Housing
4
Note: The interfaces within DISPLAY 1 provide signal source for left monitor. The interfaces within DISPLAY 2 provide signal source for right monitor.
TALLY interface and interface definition.
LAN port. (Connected to PC network interface for function adjustment.)
USB input (Only used for program upgrades and LUT load, do NOT use if
non-professionals).
DC 12V power input.
5. & 9.
HDMI input.
6. & 10.
HDMI output.
6. & 11.
SDI input
8. & 12.
SDI output.
2. MENU SETTING
Before setting the functions, please make sure the device is connected
correctly.
2.1 FN user-definable function button:
Press FN button to pop up the default options, Use ” / ” buttons to adjust the
value of selected item. Long press FN button for 3-5 seconds to pop up
shortcut menu directly. As
5
shown in right Figure (default menu is displayed in white font).
Use ” / ” buttons to select the desired item.
Functions of FN button can be customized: Center Marker, Aspect Marker, Safety
Marker, Overscan, scan, Aspect, Camera Log, Check field, H/V delay, Freeze,
Color Bar, Peaking, False color, Exposure, Histogram, TimeCode, Mute, Level
Meter.
2.2 MENU Operation
Press “MENU” button on the device after power on. The menu used for setting
function will display on the screen.
Press / buttons to select the sub-menu; then press MENU button to confirm it;
after that, press EXIT button to return to main menu.
2.2.1 PICTURE
SDI Mode
HDMI Mode
Brightness Control the degree of brightness between 0-100.
Contrast Control contrast ratio between 0-100.
Saturation Adjust the color intensity between 0-100.
Tint Adjust tint between 0-100.
Sharpness Control sharpness of the image between 0-100.
RGB Range
6
Use this item to choose the RGB range of the HDMI input: [Full], [Limited].
HDMI EDID
Select the HDMI EDID from between [4K] and [2K]. This item enables PC or other
devices to recognize the property of this monitor and makes the images look
excellent on the screen. Camera Log Use this item to choose one of the camera
Log modes: – [Off]: Turn off Camera Log. – [Def. Log]: Use this item to choose
one of the Camera Log modes as the following sequence: [SLog2ToLC-709],
[SLog2ToLC-709TA], [SLog2ToSLog2-709], [SLog2ToCine+709], [SLog3ToLC-709],
[SLog3ToLC-709TA], [SLog3ToSLog2-709], [SLog3ToCine+709],[ArriLogCTo709],
[ArriLogCToP3DCI], [CLogToV709], [VLogToV709], [JLog To709], [JLogTo709HLG],
[JLogTo709PQ], [Z7 NLogTo709], [D780 NLog To709].
– [User Log]: Use this item to choose one of the User Log modes (1-6). Please
install the User Log as following steps: The User Log must be named with. cube
in the suffix. Please note: the device only supports the format of User Log:
17x17x17 / 33x33x33; Data order is BGR; Table order is BGR. If the format does
not meet the requirement, please use tool “Lut Tool.exe” to transform it.
Naming the User Log as User1-User6.cube, then copy the user Log into USB flash
disk. Insert the USB flash disk to the device, the User Log is saved to the
device automatically at the first time. Back Light Adjust the level of the
back light from 0 to 100. Color Temp. Use this item to choose one of the color
temperature presets: [6500K], [7500K], [9300K], [User]. Note: Only available
under [User] mode to adjust R/G/B Gain and Offset. – R/G/B Gain
7
Adjust the R/G/B Gain of the current Color Temperature from 0 to 255. Default
value: 128. – R/G/B Offset Adjust the R/G/B Offset of the current Color
Temperature from 0 to 511. Default value: 256. 2.2.2 MARKER
Center Marker Select [On] to display the center marker “+” and [Off] not to
display it.
Aspect Marker Select the aspect ratio of the marker: [Off], [16:9], [1.85:1],
[2.35:1], [4:3], [3:2], [1.3X], [1.5X], [2.0X], [2.0X MAG].
Safety Marker – Select the size of the safety markers: [95%], [93%], [90%],
[88%], [85%], [80%]. Note:When this item is used with the aspect marker, it is
only in aspect marker.
Marker Color Select the color of marker displayed on the screen: [Red],
[Green], [Blue], [White], [Black].
Aspect Mat. When activated, it can be selected from 1-7 (Step value is 1).
8
Thickness Adjust the thickness of all the marker lines from 1-7 (Step value is
1).
2.2.3 FUNCTION
Scan Adjust the scan mode among [Aspect], [Pixel To Pixel], [Zoom]. Note:
Aspect and Overscan functions only can be adjusted under [Aspect] mode. Both
of them cannot be adjusted in [Zoom] and [Pixel To Pixel] modes.
Aspect Select the aspect of the image among [Full], [16:9], [1.85:1],
[2.35:1], [4:3], [3:2], [1.3X], [1.5X], [2.0X], [2.0X MAG].
9
Overscan Use this item to activate or deactivate overscan.
H/V Delay Select one of the H/V modes: [OFF], [H], [V], [H/V]. When H/V Delay
on, the blanking portions of the input signal will be displayed horizontally
and vertically.
Check Field Select one of check field modes: [Off], [Red], [Green], [Blue],
[Mono].
Zoom Select zoom scale from 10% to 90% (Step value is 10%).
Freeze Choose [On] to capture one frame of current image on the screen, and
choose [Off] to close freeze function.
2.2.4 WAVEFORM
Transparency Adjustment of transparency can support histogram, audio vector,
level meter. Transparency can be selected from among [Off], [25%], and [50%].
10
– [Off] : The background of waveform is shown at black. – [25%]: The
background of waveform is shown at 25% intensity. – [50%]: The background of
waveform is shown at 50% intensity. Peaking Use this item to activate or
deactivate the peaking function. Peaking Color Select one of the peaking
colors: [Red], [Green], [Blue], [White], [Black].
Peaking Level Use this item to adjust the level of peaking from 1-100. The
higher peaking level is, the more obvious peaking effect is.
False Color Use this item to activate or deactivate the false color function.
When activated, [Default], [Spectrum], [ARRI], [RED] are for optional.
False Color Table Use this item to activate or deactivate the false color
table. 11
Exposure Use this item to activate or deactivate the exposure function. When
activated, exposure works if the input signal exceeds the designated exposure
level.
Exposure Level Use this item to adjust the level of exposure between 50-100
IRE.
Histogram Use this item to activate or deactivate histogram. When activated,
[Y], [RGB], [Color] are for
optional. – [Y]: Display Y histogram. – [RGB]: Display RGB mixed histogram. –
[Color], Display RGB separated histogram.
Time Code Use this item to activate or deactivate the Time Code. When
activated, [LTC], [VITC] are for optional. Note: Time code is only available
under SDI mode.
12
2.2.5 AUDIO
Volume Adjust the volume among 0-100.
Level Meter Select whether to activate or deactivate level meter.
Audio Ch In HDMI mode, select one of the audio channel from among 1-8.
2.2.6. SYSTEM
Language Option: [English], [Chinese] .
Color Bar Turn on/off color bar. When the color bar on, it can be selected:
[100%], [75%].
OSD Timer Option: [10s], [20s], [30s].
OSD H Position
13
Option: 0-100. Default: 50. OSD V Position
Option: 0-100. Default: 50. DHCP
– [On]: The monitor will automatically get an IP address from network for
remote control via various programs. – [Off]: Manually configure IP address.
IP Address Manually configure IP address: 0.0.0.0 Note: When [DHCP] on, IP
address cannot be manually set . Sub Mask Manually configure Sub net Mask:
0.0.0.0 Note: When [DHCP] on, Sub net Mask cannot be manually set . Gateway
Manually configure Gateway: 0.0.0.0 Note: When [DHCP] on, Gateway cannot be
manually set . Reset Option: [Off], [On] 14
3. PARAMETERS
Panel Physical Resolution Brightness Contrast Viewing Angle Input Voltage
Input Signal Power Consumption Operating Temperature Storage Temperature
Dimension (LWD) Weight
2×7″ 1920×1200 400 cd/m2 2000: 1 160°/ 160°(H/V) DC 12V HDMI, SDI, LAN, TALLY, USB 18W -20°C ~ 60°C -30°C ~ 70°C 480×131.6×29.3mm 2.2KG
15
4. ACCESSORIES
1. DC 12V Power Adapter 2. TALLY Connector 3. User Manual Card
1 piece 1 piece 1 piece
16
5. 3D LUT Loading Demo
5.1. Format Requirement
LUT format Type: 3D Size: Data Order: Table Order:
.cube 17x17x17 BGR BGR
USB flash disk version
USB:
2.0
System:
FAT32
Size:
<16G
Color calibration document: lcd.cube
User Log: User1.cube ~User6.cube
5.2. LUT Format conversion
The format of LUT should be transformed if it doesn’t meet monitor’s
requirement. It can be transformed by using Lut Converter (V1.3.30).
5.3. Software user demo
5.3.1. Activate Lut converter
17
One individual Product ID for one computer. Please send the ID number to Sales
to get an Enter Key. Then the computer gets the permission of the Lut Tool
after input the Enter Key. 5.3.2. Enter the LUT Converter interface after
input the Enter Key.
5.3.3. Click Input File, then select *LUT.
5.3.4. Click Output File, choose the file name. 18
5.3.5. Click Generate Lut button to finish.
5.4. USB Loading
Copy the needed files to the root directory of the USB flash disk. Note! LUT
files after conversion must be named “User1”, “User2”, “User3”, “User4”,
“User5” or “User6”. Plug the USB flash disk into USB port of the device after
power on. Click “Yes” on the pop-up prompt window (If the device doesn’t pop-
up the prompt window, please check if the LUT document name or the USB flash
disk version meets monitor’s requirement.), then press Menu button to update
automatically. It will pop-up a prompt message if the update completed.
19
6.Remote Terminal Instructions
Remotely control the device by Remote Terminal application.
Home Screen
Picture: The home screen of the application
Input: Display the signal format of the connected device. For example, there
is “No Signal” when no device is connected or no signal is input. Device Name:
Display the Model No. of the connected device. Port: Select the connection way
of the port when connecting a device, and support LAN communication protocol.
Device List: Display all of the found peripheral device. Screen: Display the
number of screens for the selected device and the current screen index.
Operate: Operate the items for the device. Control Screen: The control rules
for the device.
20
Function
Port Selection: Select the specific connection port according to the device
interface and click “LAN” to switch. Device Search: Click “Refresh” button to
search devices after configuring the port. There are all of the found devices
in the device list after a successful search. Screen Choice: The “Screen”
shows the number of the screens for the current device. For the device with
multiple screens, use left mouse button to click the screen icon to select the
corresponding screen for operation; use right mouse button to click the screen
icon to copy the screen. Device Control: Click the icons of [Picture],
[Marker], [Function], [Source], [Audio] and [UMD] to switch the control page
of the corresponding function. Activate “All”: Simultaneously control all of
the devices in the device list if there is two or more devices with the same
model after activating “All”. Device Copy Function: If there are two or more
devices with the same model in the device list, click one of them and click
“Copy” button to copy the source device, and then click the target device and
click “Paste” button to copy the configuration of the source device to the
target one.
21
7. TROUBLE SHOOTING
1. Only black-and-white display: Check whether the color saturation is
properly set up or not.
2. Power on but no pictures: Check whether the cables of HDMI, SDI are
correctly connected or not. Please use the standard power adapter equipped
with the product package. Improper power input may cause damage.
3. Wrong or abnormal colors: Check whether the cables are correctly and
tightly connected or not. Broken or loose pins of the cables may cause a bad
connection.
4. When power on, the picture shows size error: Press “MENU DISPLAY Overscan”
to zoom in/out pictures automatically when receiving HDMI signals
5. Other problems: Please press “MENU” button and choose “SYSTEM Manufacturer
Default ON”, then press “ENTER” button to confirm it.
Note: due to constant effort to improve products and product features,
specifications may change without prior notice.
22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>