nVent CADDY 812MB18A Combination Box Conduit Hanger Owner’s Manual
- July 10, 2024
- nVent Caddy
Table of Contents
nVent CADDY 812MB18A Combination Box Conduit Hanger
Product Information
The nVent CADDY B18 Combination Box/Conduit Hanger is designed for the efficient and secure installation of electrical boxes and conduits in overhead applications. It simplifies the process with a single-threaded rod drop, enhancing field efficiency with nVent CADDY Conduit Clamps.
Specifications
- Material: Steel; Spring Steel
- Finish: Pre-galvanized
- nVent CADDY Armour EMT Conduit Size: 1/2; 3/4
- Hole Size (HS): 1/4
- Hole Type: Plain
- Screw Included: No
- Length (L): 18
- Width (W): 2.1
Product Usage Instructions
- Identify the appropriate location for mounting the electrical box and conduit.
- Insert the conduit into the hanger and align the box with the desired position.
- Secure the hanger in place using the provided mounting hardware or appropriate fasteners.
- Ensure that the installation is by local electrical codes and regulations.
Warnings and Certifications
Certifications: Ensure to follow all of nVent’s product instruction sheets and training materials for proper installation. Improper use may cause product malfunction, property damage, bodily injury, or void the warranty.
Contact Information
For inquiries and support, please contact nVent customer service
representatives in your region:
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: +86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Additional Information
For more details and resources, visit nVent’s website at
www.nvent.com.
FAQ
-
Q: Are screws included with the hanger?
A: No, screws are not included. Make sure to use appropriate fasteners for installation. -
Q: What sizes of conduit are compatible with this hanger?
A: The hanger is suitable for 1/2 and 3/4 EMT conduits.
CATALOG NUMBER
The nVent CADDY B18 Combination Box/Conduit Hanger presents an efficient and secure solution for the installation of electrical boxes and conduit in overhead applications by streamlining the process with a single-threaded rod drop. The system is designed to provide greater efficiency in the field with our class-leading range of nVent CADDY Conduit Clamps.
CERTIFICATIONS
FEATURES
- Scoreline breakaway feature can be easily modified by hand while maintaining UL listing
- Eliminates need for offset bending conduit
- Designed to be versatile and reusable
- Labor and time savings due to built-in first means of support
- NEC® & CEC compliant
PRODUCT ATTRIBUTES
- Material: Steel; Spring Steel
- Finish: Pre-galvanized;nVent CADDY Armour
- EMT Conduit Size: 1/2″;3/4″
- Hole Size (HS): 1/4″
- Hole Type: Plain
- Screw Included: No
- Length (L): 18″
- Width (W): 2.1″
ADDITIONAL PRODUCT DETAILS
NEC® 300.11 requires a dedicated drop wire/rod. For single and multiple runs of conduit.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication or other failure
to completely follow nVent’s instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your
warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands: +31 800-0200135
France: +33 800 901 793
Europe
Germany: 800 1890272
Other Countries: +31 13 5835404
APAC
Shanghai: + 86 21 2412 1618/19
Sydney: +61 2 9751 8500
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent