relaxn 709440 Solar Smart Sensor LED Brick Light User Manual

July 16, 2024
relaxn

relaxn 709440 Solar Smart Sensor LED Brick Light

PART NO.:

  • 709440 WHITE
  • 709442 BLACK

Please read and follow all instructions to operate. Save this manual for futures reference.

NOTICE

  1. The lamp button is a power-off switch. the lamp can get solar charged in any mode.
  2. This is a solar-powered lamp, please install it in a location where it can get enough sunshine.
  3. Please note the lighting time depends on the sunshine duration & weather.
  4. Built-in intelligent IC with over-charge, over-discharge and over-voltage protection.
  5. The lamp is equipped with an internal battery pack. which is replaceable. If required. please contact the seller for the correct new battery pack.
  6. Non-professionals please do not disassemble the lamp.
  7. Please do not dispose of the battery with household garbage to avoid explosion.

SPECIFICATIONS

FEATURES

  • Lumen output of up to 800lm.
  • 120° wide angle PIR sensor detects up to 6 meters away.
  • Lasts up to 2-4 nights from a single 8-10 hour charge.
  • Rated IP65 water and dust protection.
  • Made from high quality Anti-UV and Flame-Retardant material.
  • Easy to install, no wire, no running power cables, just fit and forget.
  • Mounting screws included.

ACCESSORIES

WORKING MODES

Please print on A4 paper in landscape orientation

Mode A – Sensor Mode

  • When battery power is more than 30%
    The lamp will automatically turn on 100% full brightness when the sensor has detected motion in the 6 meter radius and then turns to 5% brightness for 20 seconds after motion.

  • When battery power is less than 30%
    The lamp will automatically turn on 100% full brightness when the sensor has detected motion in the 6 meter radius and then turns off after 20 seconds of no motion.

Mode B – Constant Lighting Mode

The lamp will automatically turn on at night and keep 50% brightness constantly. After 5 hours or when battery power is less than 30%, it turns to energy-saving mode, then the lamp will automatically turn on l 00% full brightness when the sensor has detected motion in the 6 meter radius and then turns off after 20 seconds of no motion.

INSTALLATIONS

  1. Drill 2 holes of 06mm with a depth of 50mm and hole distance of 140mm on the wall.
  2. Fix the expansion plugs in the holes.
  3. Fit the screws into the expansion plugs, and allow the screws to protrude slightly around 4mm.
  4. Turn on the lamp and set desired working mode.
  5. Hang the lamp on the screws to fix the lamp on the wall.

WARRANTY

  • Sam Allen Wholesale warrants this product against defects in manufacture and workmanship for a period of l year from the date of purchase. This warranty is only valid for products installed and operated within the guidelines specified by Sam Allen Wholesale, and within the correct operating voltage ranges as stated on the product’s rating label.
  • Warranty does not include damage or loss arising from incorrect installation, operation or maintenance of this product, damage caused through modification, service by unqualified or unauthorised personnel or lack of regular maintenance and cleaning. Proof of installation by qualified personnel may be required.
  • This warranty is provided in addition to any other rights and remedies of the customer under any law. In applications not intended for household, personal or domestic use, liability is limited to replacement or reimbursement of the product only. Sam Allen Wholesale does not warrant the costs of removal or re-installation of this product or associated components.
  • Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. The consumer is entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major  failure.
  • To make a claim under the warranty: Please return to the point of purchase, including reasonable proof of that purchase.

Please print on A4 paper in landscape orientation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals