avatar CONTROLS E27 Wi-Fi Smart Bulb User Manual

avatar CONTROLS E27 Wi-Fi Smart Bulb

Preparation content

• AvatarControls APP (Also compatible with the “smart life” app)
• AvatarControls APP account (users need to register their own account)
• Smart Bulb
• Reset switch on-off-on-off-on within 10 seconds Until the bulb fast flashing state. If not operating within 3 minutes, the bulb will restore to stable white light.
• 2.4 GHz WiFi environment (turn off 5GHz)

Add device

Download AvatarControls APP

• Please download AvatarControls APP first:
• Please scan the QR Code, or get AvatarControls downloaded from App Store, Android Market

Register an account in AvatarControls

• Open AvatarControls on the account registration page, click on the”Register”
• On the registration page, select your region and enter the email to create a new account. （Phone number is not available）
• After successful registration, you can add a device to your App now.

Add devices ( Smart Bulb)

• After login to AvatarControls APP, click on “+”.
• AvatarControls APP supports two types of distribution network modes: EZ mode and AP mode.
• EZ mode: The Smart Bulb is in a state of fast flashing. (About two times a second) .
• AP mode: The Smart Bulb is in a state of slow flashing. (About once 2 seconds) If the bulb can not be paired in EZ mode(rapid blink), please switch to AP mode(blink slowly)
• After entering the “Add Device” page, confirm whether the Smart Bulb is in EZ mode. if not, can switch to EZ mode by a continuous operation of “on-off-on-off-on”. Then click on “indicator light is flashing fast” to start adding Smart Bulb.
• Select the Device Work Wi-Fi and enter the password, then start the configuration of the device. “Device added successfully” will be displayed after a successful operation.

Rename the device

• After the device is added successfully, click the device description text to modify the device name. The name of the device is recommended to use the easy pronunciation of the English words. (Amazon Echo only supports English temporarily).

Multiple devices can be added and renamed according to the above procedures.

Control Your Smart Bulb with Alexa/Google Assistant

Before you start, make sure that:

• • Your smart bulb is connected to wifi and can be controlled by an app.
  • You have an Alexa-enabled device (i.e Echo, Echo Dot, and Amazon Tap) or a device enabled with Google Assistant (i.e. Google Home).
  • The Amazon Alexa app or the Google Home app which is already installed on your smart device and you have created an account.

To control your devices with Amazon Alexa

1. Open the Alexa app and select Skills&Game from the menu in the top left corner of the homepage.
2. On the Skills&Game screen, search for”Avatar-Controls”.
3. Enable it in the Alexa app.
4. Log in with your AvatarControls account to authorize Alexa to access to your account.
5. Discover new smart devices via the “Smart Home” menu in the Alexa app or Alexa voice control.
6. Say simple commands to Alexa:
7. “Alexa, turn on/off bedroom light. (Turn on/off the light)” “Alexa, set bedroom light to 50 percent. (Set the light to any brightness)”
   “Alexa, brighten/dim bedroom light. (Increase/weaken the brightness of the light)” “Alexa, set bedroom light to green. (Adjust the color of the light )”

To control your devices with Google Assistant

1. Open the Google Home app and select “Settings” on the home page.
2. Find “More Settings” at the bottom of the page.
3. Choose “Devices”, and Tap the “+” add, then you will into the” And a device ”page. Click the “Link a Smart home device”, and “ ” icon, input “AvatarControls”
4. Log in with your Avatar Controls accounts to authorize Google Home to access your account.
5. After successful configuration, say simple comm-ands to Google Assistant to control the light with your voice.
6. “Ok Google, turn on/off the bedroom light. (Turn on/off the light or other device)”
7. “Ok Google, set bedroom light to 50 percent. (Set the light to any brightness)”
8. “Ok Google, brighten the bedroom light. (Brighten the light)”
9. “Ok Google, set the bedroom light to red. (Set the color of the light, only color-changing lights support this function)”

Troubleshooting

Cannot connect to Wi-Fi

• Check if you have selected a 2. 4 Ghz wifi which is the same that your phone is connected with. (If your router is dual-band make sure your phone and the smart bulb are connected to the 2. 4 G signal.)
• Check if you have entered the correct Wi-Fi password.
• Check if there are any internet problems. If necessary, reset your Wi-Fi router and try again.

Cannot control the devices with Alexa/Google voice control

• Check if you have enabled “AvatarControls” in Alexa or Google APP.
• Check if the bulb is online on the app(Do not turn off the bulb through your wall switch otherwise it will go offline.)
• Check if you are using proper commands when talking to Alexa/ Google Assistant, repeat your question, and speak clearly to Alexa/Google Assistant in English.
• Check if you have modified the name of the bulb in the “AvatarControls” app. If yes, you need to rediscover the devices through Alexa/Google app.

Notice

• Please check if there is damage caused by portation. If broken, please contact the supplier for replacement.
• Please follow the instruction and notice to keep the product in a good and safe use condition.
• Do not disassemble or reinstall the bulb:

Please be assured that we always provide a 12- month warranty(replace or refund) that covers any quality or manufacturing-related issue.

supports
Any supports, please send your order number and issue to [email protected] directly. We will process your case within 48 hours, thank you. Contact: [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>