EBL LN-6499 808 Battery Charger User Manual

June 13, 2024
EBL

EBL LN-6499 808 Battery Charger

Product Information

The EBL product is a charger for AA AAA Ni-MH and Ni-CD rechargeable batteries. It has an input voltage range of 100-240V AC and a frequency of 50/60Hz. The charger has a maximum input current of 0.3A and provides an output of DC 1.2V with a charging rate of 1000mA for AA batteries and 500mA for AAA batteries. The charger has a no-load power consumption of 0.5W and a full-load power consumption of 10W. It is designed to charge 1-8pcs of batteries independently.

Product Usage Instructions

  1. Ensure the charger is connected to a power source.
  2. Place the battery into the charger correctly by aligning the +/- poles of the battery with the corresponding +/- poles of the charger.
  3. When the charger is powered on, all the indicated lights will briefly light up in red and green, and then turn off. The indicator will turn red when charging and will switch back to green when the battery is fully charged.
  4. If non-rechargeable batteries are placed in the charger, the charger will stop charging and the LED will flash red.

User Manual

EBL-LN-6499-808-Battery-Charger-FIG-1

General Information

  • Detailed instruction is provided in this manual(the charger function, safety usage and notice.)

Electrical Specification

  • Input: 100-240V AC 50/60Hz 0.3A Max
  • Output: AA: DC 1.2V 1000mA
  • AAA: DC 1.2V 500mA
  • No Load Power Consumption: 0.5W Max
  • Full Load Power Consumption: 10W Max
  • Battery Charging Rate: ≥ 85%

Working Environment Condition

  • Using Temperature: 0-35°C; Humidity: ≤95%
  • Storage Temperature: -10-50°C, Humidity: ≤85%
  • Working Temperature:
  • Surface temperature of charger: ≤60°C
  • The surface temperature of the battery: ≤45°C

Using Instruction

  • The charger can charge 1-8pcs Ni-MH Ni-CD rechargeable batteries independently.
  • Place the battery into the charger correctly by making sure the “+/-” pole of the battery corresponds to the “+/-” pole of the charger.
  • When the charger is powered on, all indicated lights will light on in red (one second)→green (one second)→light off, and it will turn to RED when charging. after fully charged, the indicator will turn back to GREEN.
  • When place non-rechargeable batteries into the charger, the charger will stop charging and the LED turn to a flashing RED light.

Cautions

  • This charger could charge 1-8pcs AA/AAA Ni-MH Ni-CD batteries freely.
  • If the indicator does not light on when installing the battery, please check if the battery is absolute 0 volts.
  • The new battery will reach peak performance after using 3-5 times.
  • The battery will lose part of its capacity after not being used for more than one month, please fully charge before using.
  • It’s a normal phenomenon that the battery is warmer than room temperature while charging.
  • Children could not use this charger without an adult’s supervision.
  • Use this charger within the temperature between 0°C and 35°C.
  • Cutting off the power supply when the charger finishes its work.

Warning

  • Only charging for Ni-MH, and Ni-CD rechargeable batteries, charging for another type of battery may cause an explosion, battery broken, leakage, personal injury or damage to property.
  • It may cause an electric shock hazard if the charger incorrectly.
  • This charger is used indoors only, keep it away from moist and heat.
  • Please place it under the safety place where the children cannot reach up.
  • Risk of Fire. Use only the detachable cord furnished with the charger for connection to the alternate voltage. Type NISPT-2 or heavier cord, minimum 18AWG copper.

Size & Weight

Size 178mm X 77mm X 28 mm
Weight 148g

Warranty

  • We provide a 30-day worry-free money-back and a one-year limited warranty.
  • Any problems, please feel free to contact us: service@eblmail.com.

Thanks for purchasing EBL’s products!
For your own safety, please read this user manual carefully before using it.
Notice

  • Please check if the battery is damaged, bulging, or leaking before using. If so, please stop using it.
  • Please make sure that the polarities are inserted as required before using.
  • A new battery can achieve the best performance only if it experiences a 3-5 times cycle of charge-discharge.
  • if the battery gets hot after use, it should be cooled before recharge. Please remove the battery from the device if ti not been used in a long time.
  • Please charge and discharge the battery at least once every three months if it was been idle for a long time.
  • Please use a compatible battery charger to charge batteries. Use Ni-MH and Ni-Cd compatible battery chargers.
  • Please avoid batteries being used in an airtight place.
  • Please store batteries in a cool and dry place.

Important Safety Instructions

  • Do not overcharge and over-discharge batteries, please keep the charging processing under adult’s attention.
  • Do not reverse batteries for charging, it will cause leakage, fire hazard and explosion.
  • Do not charge or keep batteries in a high-temperature, moist and sunlight-direct place.
  • Do not charge our batteries with other types of non-rechargeable batteries, for example, Alkaline, Zinc etc.
  • Do not charge our batteries with different brands batteries and different size batteries.
  • Do not mix new batteries in use with half-used batteries, discharging may occur.
  • Do not charge batteries where children can reach them.
  • Do not short-circuit batteries, it will damage batteries for good.
  • Do not disassemble or fire batteries, it may cause an explosion.

We provide 30 days of worry-free money back and a year-limited warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals