delta WPTT-15AB J Wireless Charger User Manual

delta WPTT-15AB J Wireless Charger

Specifications

• Input: 5.0V 2.0A, 9.0V 3.0A 15W Max
• Output: 5.0V 5W, 9.0V 15W
• Ambient temperatures: 35°C
• Frequency range: 112-400kHz
• H-Field Strength: -5.62 (dBuA/m) @126.94kHz, -20.91(dBuA/m) @360kHz

Product Usage Instructions

1. Connect the Wireless Charging Pad using a USB Type-C to Type-C cable with a power adapter.
2. Place a Qi-compatible device in the center of the Wireless Charging Pad to initiate automatic charging.
3. If the Wireless Charging Pad encounters an error due to metal objects on the pad, remove them for charging to resume.

Precautions

• Avoid putting pressure on the product and prevent any impact.
• Do not disassemble or modify the product.
• Keep the product away from fire and water.
• Avoid using the wireless charger in hot, humid, or corrosive conditions to prevent circuit damage.
• Avoid placing cards with magnetic strips or chips near the product to prevent card reading failures.
• Keep the wireless charger away from children as it is not a suitable toy for them.

FCC Compliance Information
For any changes or modifications, consult the dealer or a radio/TV technician to avoid voiding user authority.

EMC Compliance
Use compliant peripheral devices and shielded cables between system components to reduce interference with other electronic devices.

WEEE & Batteries Directive
The WEEE symbol indicates that the product and its battery must be disposed of separately from household waste at designated collection points for safe recycling.

FAQ

Q: What should I do if my Wireless Charging Pad is not charging my device?
A: Check for any metal objects on the pad and remove them. Ensure your device is Qi-compatible and placed correctly on the pad for charging to start.

WIRELESS CHARGER
WPTT-15AB J
Innergie, The Brand of Delta

Specifications

• Input：5.0V 2.0A, 9.0V 3.0A
• Output：5.0V 5W, 9.0V 15W Max
• Ambient temperatures：35℃

Setup Instruction

• Please use the USB Type-C to Type-C cable with a power adapter, to connect the Wireless Charging Pad
• Place a Qi-compatible device in the center of the Wireless Charging Pad, to start charging automatically.

If Wireless Charging Pad has encountered an error and protective measures have been activated. Please check if any metal objects have been placed on the charging pad. If so, please remove them and check if the pad resumes charging.

Adapter Requirements

• 5 W charging is supported by PD 5 V/2 A adapters.
• 15 W charging is supported by PD (above 27W) adapters.

Precautions

• Do not put pressure on this product, and prevet any impact.
• Do not disassemble nor modify it on your own.Keep the product away from fire and do not submerge it in water.
• Do not use the wireless charger in severely hot, humid or corrosive conditions to avoid damage to the circuit. Do not place cards equipped with a magnetic strip or chip close to the product, in order to avoid possible card reading failures.
• This wireless charger is not a suitable children’s toy, please keep it away from them.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Maintain a distance of 20 cm from your body to be consistent with how the device is tested for compliance with RF exposure requirements.

EMC Compliance
Important: This device and power adapter have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.

RF Exposure Information (MPE)
This device meets the EU requirements and the International Commission on Non- Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.

Waste Electrical and Electronic Equipment (WEEE) & Batteries Directive

The WEEE symbol above means that according to local laws and regulations, your product [and its battery] must be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product and its battery will help conserve natural resources, protects human health, and help the environment.

Manufactured by DELTA ELECTRONICS, INC.
Hereby, DELTA ELECTRONICS, INC. declares that the radio equipment type WPTT- 15AB J is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://downloadcenter.deltaww.com
Hereby, DELTA ELECTRONICS, INC. declares that the radio equipment type WPTT- 15AB J is in compliance
with Regulation S.I. 2017/1206. The full text of the UK declaration of conformity is available at the following internet address: https://downloadcenter.deltaww.com

References

• Delta | Download Center
• Delta | Download Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>