GAZELLE G9641 Hand Hydraulic Cutting Tool User Manual

GAZELLE G9641 Hand Hydraulic Cutting Tool

Specifications

• Output force: 6ton
• Rated pressure: 700bar
• Cutting capacity: Max 50mm Cu/AL
• Weight: 3.9kg
• Dimensions: 56178cm

Product Usage Instructions

Application Range

The hydraulic cutting tool G9641 is designed to cut copper, aluminum, and conductors up to a maximum diameter of 50mm.

Attention: Wear eye protection when using the tool to cut conductors. Do not cut live cables or conductors.

Operation Guide

1. Ensure proper safety gear, including eye protection, is worn.
2. Select the appropriate conductor to cut within the specified diameter range.
3. Position the tool correctly on the conductor to be cut.
4. Apply pressure as per the rated pressure and activate the cutting mechanism.
5. Release pressure once the cut is complete.

Maintenance Instructions

• Clean the hydraulic cutting unit thoroughly.
• Lubricate moving parts, especially the blade, regularly.
• Check for any damage or oil leaks.

Storage and Transport

• Clean the tool after every use.
• Place the tool in its transportation case and securely close it for storage or transport.

Troubleshooting

Do not attempt to repair it yourself. Return the tool to the manufacturer or an authorized distributor for service.

Frequently Asked Questions

Q: Can users replace spare parts within the warranty period?

A: No, customers are not allowed to exchange spare parts covered under warranty, such as screws and others.

Q: What should be done with the disposed oil from the tool?

A: The oil should be disposed of at special delivery points to prevent environmental contamination. Improper disposal can result in penalties under environmental laws.

Introduction

• Use this tool exclusively for its determined use.
• Mounting and assembly of connecting material with the help of this tool must only be performed by specially trained personnel.
• This instruction manual must be carried along during the entire life span of that tool.
• The operator must guarantee the availability of the instruction manual for the user and make sure, that the user has read and understood the instruction manual.

Labels

• On the labels fixed on the housing of the tool, you will find the model number, technical specifications, and the company logo.

Warranty

• If correct operation is guaranteed and regular service is provided our warranty is 1 year from the time of delivery.

Description of the hand-operated cutting unit

Components description

Operation description

Application range

• Hydraulic cutting tool G9641 can cut copper, aluminum, and conductors, up to a maximum diameter of 50mm.
• Attention Wear eye protection when using the tool to cut the conductors.
• Attention Do not cut the live cables or conductors.

Operation guide

1. Turn the screw by 180° while the pump lever is pushed toward the handle.
2. Activate the pump lever to start the cutting process.
3. First, the cutting head has to be opened by pulling the lock pin out of the cutting head
4. Then the cable /conductor must be positioned in the cutting head which must be closed thereafter. Keep the cutting head in a vertical direction till the cut is completed.
5. After the cutting is completed, actuate the retract lever to release the piston the the start position and a new cutting circle can be activated then.
6. Before storing the tool, the turn screw has to be turned 180° until the lock is activated.

Maintenance instruction

• The hydraulic cutting unit has to be cleaned after use and lubricated regularly, especially for the blade; check out the damage and oil leak.

Storage and transport

• To protect the tool against damage it has to be carefully cleaned after every use and be put into the transportation case and closed safely.

Reference as to which spare parts can be exchanged by the user

• The customers are not allowed to exchange the spare parts within the warranty, eg Screw, and others.

Troubleshooting

• The tool loses oil=>Return the tool to the manufacturer or authorized distributor. Do not open the tool and damage the seal of the tool.

Putting out of the operation and/Waste of disposal

• The disposal of the various components of the tool has to be treated separately. The first step is to dispose of the oil at special delivery points.
• Attention Hydraulic oils represent a danger to the ground water, Uncontrolled draining of or improper disposal of the oil is under penalty.

Environment Liability Law

• The remaining parts of the unit must be disposed of according to domestic environmental standards.
• Because of the possible environmental damages we recommend to disposal of the tool by professional companies, a return of the old tool free of charge to the manufacturer cannot be granted.

Technical data

• Output force: 6ton
• Rated pressure: 700bar
• Cutting capacity: Max φ50mm Cu/AL
• Weight: 3.9kg
• Dimensions: 56178cm
• We shall in no event be liable for death, or injuries to persons or property from the improper use and lack of maintenance of our product.
• Any doubt about safety operations and precautions, please contact our distributor.
• Please properly dispose of all packing materials and remove parts.
• GAZELLE
• sales@gazelleindustrial.com
• www.gazelleindustrial.com

Documents / Resources

| GAZELLE G9641 Hand Hydraulic Cutting Tool [pdf] User Manual
G9641, G9641 Hand Hydraulic Cutting Tool, G9641, Hand Hydraulic Cutting Tool, Hydraulic Cutting Tool, Cutting Tool
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>