LASER HPS-KBTMIC Wireless LED Headphone User Manual
- June 3, 2024
- Laser
Table of Contents
User Manual
Wireless LED Headphone
HPS-KBTMIC
Thanka you for your purchase!
Laser Corporation is 100% Australian owned & operated. To get the most out of
your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs,
Warranty claims, and more, please scan the following QR code:
https://www.laserco.com.au/support
WHAT’S IN THE BOX
- Headphone
- Charging Cable
- User Manual
SPECIFICATIONS
| Operating Distance: | 10 Meters |
|---|---|
| Battery Runtime: | 3-4 hours |
| Frequency: | 20Hz – 20 kHz |
| Speaker Impedance: | 32Ω |
| Sensitivity: | 85dB+/-3dB (1kHz) |
| Charge Time: | 1-2 Hours |
CONTROLS
1. | – Short Press: Next song
– Long Press: Volume up
---|---
2. | – I urn off/on lights
3. | – Long Press : On/off
– Short Press : Play/pause
music or reject/answer call
– Press for 2 seconds:
Calls back last known number
4. M| – Press to switch between
wireless or wired modes
CONTROLS Continued…
5. V-| – Short press: Previous song
– Long Press: Volume Down
---|---
6. | – Plug the Micro USB cable into the charging port to charge the
headphone
7. | – 3.5mm audio cable can be plugged into the AUX port for wired use
8. | – Adjustable microphone
OPERATING INSTRUCTIONS
Pairing:
- Turn the headphone on
- The headphone will automatically enter pairing mode
- Open the bluetooth settings on your device, then search for and select HPS-KBTMIC
AUX Mode:
- Plug the 3.5mm audio cable directly into the headphone jack
OPERATING INSTRUCTIONS Continued…
LED Light:
Wireless mode: The blue light is flashing when connecting to a device and
will flash slowly after the connection has finished
Charging mode: The red light is on while the headphone is charging, and
will turn blue once the headphone has reached 100% charge
FM Mode:
- Press the mode button twice to start an auto scan and press mode once more after the scan has completed to end it.
- Using the Next/previous song funtions will change stations.
TROUBLE SHOOTING
No Power:
- Check battery level and charge if required.
- Try charging the headphone with a USB wall adapter (like a smart phone charger) instead of a laptop or computer.
- A USB wall adapter up to 5V/1A is recommended for charging.
Problems Connecting to Bluetooth:
- Place the speaker next to the smart device you are pairing to e.g., Smartphone.
- If the Bluetooth name “HPS-KBTMIC” does not appear on the list of available devices, then try refreshing the list or searching again.
- Allow up to 1 minute for the device to appear on the Bluetooth list.
- Make sure the headphone is in Bluetooth mode (default mode when turning on speaker) before searching on your smart device.
- If the headphone is already connected to another smart device, it will need to be unpaired from that device first or it will need to be out of Bluetooth connection range of that device before it can be connected to another.
Visit our website
www.laserco.com.au
Check us out at
www.youtube.com/Iasercoau
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>