Pyle PLCM4375WIR.5 Wireless Rear View Backup Camera User Manual
- June 3, 2024
- Pyle
Table of Contents
Pyle PLCM4375WIR.5 Wireless Rear View Backup Camera
Specifications
- PRODUCT DIMENSIONS: 91 x 5.12 x 2.92 inches
- ITEM WEIGHT: 1 pounds
- DISPLAY TECHNOLOGY: In-Dash Vehicle
- OTHER DISPLAY FEATURES: Wireless
- SCREEN SIZE: 3 Inches
- LUX RATING: 2
- COMPATIBLE DEVICES: Monitor
- DISPLAY TECHNOLOGY: In-Dash Vehicle
- INSTALLATION TYPE: Surface Mount, Dashboard Mount
- VIDEO CAPTURE RESOLUTION: 492p
- VOLTAGE :12 Volts
- OPTICAL SENSOR TECHNOLOGY: CMOS
- REAL ANGLE OF VIEW: 170 Degrees
- BRAND: Pyle
Introduction
With the Pyle PLCM4375WIR, you can mount your camera and monitor precisely where you need them because the system comes with all the cables and cabling required for installation. It also offers custom installation parking assistance. The accompanying mounting arm allows you to install the 4.3″ monitor on your windshield in any convenient spot. For the best backup viewing, the marine grade waterproof camera should be mounted ideally slightly above the rear licence plate of the car. The lightweight but sturdy camera housing is simple to install and will give you an extra set of eyes while driving. Avoid bikers, pay attention to pedestrians, and manoeuvre into those tight parking spaces like never before. When driving in reverse or in low light conditions, it is helpful. For enhanced safety, the color camera also shows distance scale lines on your monitor that clearly delineate the distance from objects. The Pyle PLCM4375WIR Wireless Monitor and Camera Parking Assist System helps you to drive more safely and intelligently.
Pyle is the kind of sophisticated reversing camera eliminates the need for connections between the camera and the display. It operates remotely. Most wireless rear-view cameras have independent power sources from the display.
What’s in the box?
- Camera / Monitor
- User Manual
LCD DISPLAY, 4.3″
The Pyle Wireless Car Backup Camera System has an integrated 2.4 GHz wireless video receiver, a thin 4.3″ TFT/LCD monitor, and an NTSC/PAL video system. will activate when the reverse gear is engaged automatically.
NETWORK TRANSMITTER
a wireless monitor solution for a car backup camera that is simple to install and doesn’t require any long wires. has a wireless transmitter that enables quick video transmission from the camera to the screen. includes a tilt angle that may be adjusted.
THE NIGHT VISION
For use in cars and other motor vehicles, this wireless backup camera system offers a fog-resistant design and night vision capabilities. To withstand adverse weather, it has an IP-67 marine grade waterproof rating. Kit contains all required wirings.
LICENSE MOUNT OR DASHBOARD
The vehicle rearview camera comes with two installation options: it may be fixed to the license plate using its slender bar housing or on the dashboard using the accompanying universal dashboard mount bracket.
LINES OF DISTANCE SCALE
An accurate distance scale line display on a backup camera kit is necessary for safe parking and reversing without using only the side mirrors. For Jeeps, pickup trucks, and other vehicles, this reverse parking sensor provides safety.
System Functions
Parking assist system with wireless backup camera and monitor, camera, monitor, and all required cables & wiring.
Broadband Transmitter
Wireless Transmission Distance: 100′ Feet Max., 2.4G Signal Transmitter, Instant Camera Video to LCD Display.
Monitoring Device
Built-in 2.4GHz Wireless Video Receiver, Additional Video Monitor Connection Ability, 4.3″ Slim TFT/LCD Screen, Reverse Camera Priority Signal Sense, Automatic Turn-On Activation when Video Signal Received, 200 cD/m of brightness, 200:1 of contrast, and an automatic switching NTSC/PAL video system.
Note
Products with electrical plugs are made with American consumers in mind. Because outlets and voltage vary from country to country, this device might need an adapter or converter to be used where you are travelling. Before buying, kindly verify compatibility.
Frequently Asked Questions
Is this an easy install or should it be installed by a mechanic?****
I went to a dealership to find out which wires were positive and ground on the back-up light wires. I looked at a YouTube video on splicing wires using a connector that doesn’t require cutting or stripping wires. I bought them at Home Depot. Squeeze very hard when using the connector. I am very mechanically-deficient, but this was easy.
How does this system detect a gear change into reverse?****
You have to connect the excess (hanging) wire on the RCA yellow cable to your reverse trigger wire so the unit will detect if your car is in reverse.
What commands are adjustable from the menu?****
You can adjust the pictures and other settings under Menu.
How far does the wireless signal reach? I would like to attach this to my travel trailer.****
The wireless signal can reach approximately around 5 to 6 ft.
Are the parking lines adjustable side-to-side to accommodate different car widths?****
No, I think l didn’t find any option to adjust.
Why does the Monitor flash off and on when backing up?****
our sincere apologies. Please try to disconnect all the wirings then connect it after a few minutes.
Is this a good backup camera?****
Yes it is.
If it is wireless what are the wires for that are shown in pictures?****
It is wireless between the CAMERA on the license plate bracket and the MONITOR which should be mounted on the dash or windshield. The wires provide 12V power, red lead, which must be spliced into the BACKUP LAMP power lead,(+) and black lead which must be attached to any good Ground (-). The distance between the camera and the monitor must be as close as possible to provide a good wireless connection., so the sending unit should be installed in the trunk close to the back of the rear seats.
If I buy one of these, where can I buy a 2nd camera to use with it? I’d like to mount two cameras and be able to switch between the two.****
I could not find where that camera is sold as standalone.
Can I attach more than one camera to the display? If so, where do I buy additional cameras?****
Yes. An additional Video Input jack is available on the side of the monitor. You can shop around for any car camera of your choice.
Will this interfere with the Bluetooth connection for my phone link?****
I have had no problem with mine. I think it uses different channels than Bluetooth.
If I use this for only backing up to my trailer, can I just plug into a 12v wire in the trailer plugs on bumper?****
you may bypass the connection from your reverse wire and connect the unit directly to your hot wire or battery + and -. The camera is always ON and you can see the image on the screen.
Can I fix it temporarily to a 10-inch u haul truck? Would I need anything else for backing up?****
Yes, you can use the unit to your truck. All you have to do is to wire the camera properly and it will work.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>