QiSa KR-T01 Wireless Charger Solar Power Bank User Manual
- June 6, 2024
- QiSa
Table of Contents
QiSa KR-T01 Wireless Charger Solar Power Bank User Manual
Thank you for purchasing this solar power bank. Please read the manual carefully before use, and keep it for reference in the future.
Product Features
- Wireless Charger output : 5W Wireless Charging Transmitter
- IP65: Rainproof
- Multi-Functional LED Lights: The LED flashlight is a perfect outdoor companion. With lighting, flash and SOS lighting modes, it leads you through darkness and emergencies as lifesaver.
- Dual USB output port,1 Type-c output port: The power bank is able to charge three devices simultaneously.
- Safe Use: Short circuit protection, over-discharging protection and over-charging protection are designed in PCBA.
QI Wireless Charging: The wireless charging function activate only when your devices are on charging mode. (If your mobile phones do not support wireless charging, need to use an external wireless receiver.)
Capacity
|
36000mAh
---|---
Micro USB Input
| DC 5V 2A (Max)
Type-C Input|
DC 5V 3A (Max)
USB Output 1 2
| DC 5V 3A (Max)
Type-C Output|
DC 5V 3A (Max)
Wireless Output
| 5V 1A (Max)
Solar Panel|
5V 360mAh
Product size
| 16.758.652.85/cm
Full charging time|
9-12 hours
Operation temperature
| 0-45 C
Battery type|
Rechargeable Li-polymer battery
Flashlight
|
0.5 W*8
Accessory List: User Manual, Micro USB Charging Cable, Power Bank
PRODUCT OVERVIEW
- USB Output 1,2 : DC 5V 3A Max
- Micro USB Input: DC 5V 2A Max
- Type-C Output: DC 5V 3A Max / Input: DC 5V/3A Max
- 4 LED Indicators for power status
- Solar charging indicator
- LED Lights
- Power Button
- Solar Panel
- Wireless charging
Operating Instructions
How to Charge the Power Bank
To collect and store solar power to the Solar Charger’s internal battery:
-
Output 1 views
-
Output 2 views
-
Type-c views
-
Micro USB Charging
-
Type-c Charging
-
Wireless charging
- Place the Solar Charger in direct sunlight: make sure the embedded solar panel is positioned towards the sun.
- The solar power LED indicator light glow solid green while charging by the sunlight and turns solid blue when the Solar Charger is fully charged.
Note: Kindly note that the solar panel is designed for emergency charging. It should not be the primary source of charging. Prolonged exposure under the burning sun will cause damage to the solar panel.
Note: The Blue LED will be on when under wireless charging mode.
Charging the Solar Charger from an external power source:
Micro USB Charging/Type-C charging
Connect the Power Bank to a charger with the provided USB charging cable or your own Type-C cable, then connect the charger to a power source. The Power Bank will be charged automatically. Please use a charger with output voltage between 5V∼5.5V to charge. (Notice: For charging power bank, it don’t support charging and discharging at the same time, Micro USB and Type-c input can’t charge at the same time. Battery’s charging status is indicated by 4 LED light indicators in the following manner:
Charging Status
LED Indicators| 0%-25%| 25%50%| 50%-75%| 75%-99%|
100%
---|---|---|---|---|---
1st
| Flashing Blue| | | |
2nd| oFF| Flashing Blue| | |
3rd
| oFF| oFF| Flashing Blue| |
4th| oFF| oFF| oFF| Flashing Blue|
How to Use the Power Bank to Charge Your Devices Note: The power bank
needs to be fully charged if you wish yo utilize both USB ports and charge
three devices simultaneously. 4 LED indicators will constant on after the
power bank is fully charged.
Connect the Power Bank to your device with the provided charging cable, it will start to charge your device automatically. The power bank will shut oP in 35 seconds when no device is being connected with.
Operating the LED Flashlight
- To turn on the Emergency LED flashlight: Double Press the power button to turn on the LED flashlight.
- To turn on the Caution Light: After operate step i., then press the power button once to switch the Caution Light on.
- To turn on SOS Signal Light: After operate step ii., then press the power button once to switch the SOS Signal Light.
- To turn oP the LED Flashlight: Double press the power button once to turn oP the LED Flashlight.
Note
- The full charging time is only for your reference, please refer to actual operation.
- High quality guarantee, using A-grade Li-polymer battery cell for this power bank , please be assured use.
- Please using the matched charging cable according to your mobile phone and digital product.
- It will cause slight heating due to electric consumption when charging and discharging, it’s normal phenomenon.
- Please store this power bank in a cool and dry place, if do not use for a long period, please fully charged this power bank at every 6 months interval.
- Please find our suggestion to choosing regular 5V-2A charger to charge this solar charger, in order to ensure the stability of this product usage.
- Please do not put together this power bank with metal or tool items, in order to avoid scratching surface or damage.
- Don’t leave this item out in your car to charge. Car’s dashboard will become very hot from the sun and would ruining the internal battery.
WARNING
- DO NOT attempt to open or dismantle the product.
- DO NOT subject the power bank to naked flames or extreme heat.
- DO NOT stand on or otherwise apply pressure to the power bank.
- DO NOT allow children to play with the power bank.
- Whilst the device will charge in high temperatures please ensure the device never sits in direct sunlight for a prolonged period of time as the charger has a maximum temperature of 45 C (113 ).
- Stop using this power bank if it occur expansion or break down, and contact local distributor.
- Unless supervision and guided by professional man, and ensure safety of user, the following person are not suitable to use this power bank: people who degeneration on physical function or mental ability, people who lack of operating experience and lack of acknowledge of this power bank.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct.
The interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate this equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipmentshould be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>