BIGASUO V511 1080P Home Projector User Manual
- June 16, 2024
- BIGASUO
Table of Contents
- FCC WARNING STATEMENT
- TURN ON THE PROJECTOR
- TURN OFF THE PROJECTOR
- PACKING LISTING
- QUICK START
- PROJECTOR OVERVIEW
- Remote Control
- PROJECTION DISTANCE & SIZE
- PROJECTION MODE
- PROJECTOR CONNECTION INSTRUCTION
- PICTURE AND SOUND SETTINGS
- BLUETOOTH SETTING
- Wifi Connection
- Screen Mirroring
- Projector Image Setting
- Trouble Shooting
- Specification
- WARRANTY
- Documents / Resources
USER MANUAL
V511
1080P Home Projectr, Light your Life!
FCC WARNING STATEMENT
FCC Statement
This device complies with part 15 of the FCC rules, Operation Is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation,
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Warning:
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
FCC ID: 2AXBD-V501
TURN ON THE PROJECTOR
-
(Plug the power cord into an outlet)
-
(Push open the lens cover to tum on the projector)
-
The projector will turn on in about 3- 5 seconds.
TURN OFF THE PROJECTOR
- Close the lens cover or press the power button on the remote control to turn off the projector
- Remember to unplug the power cord from outlet after each time of use.
Tipps: Please don’t unplug the power adapter directly before turn the
projector off, which may cause damage to the machine.
Actually, many problems can be easily solved by setting, without having to
choose to return.
If you have any issues,email your order number and the problem to us-
projector-511@eitack.com.
We promise to quickly provide you with a satisfactory solution within 24
hours.
PACKING LISTING
Notice
QUICK START
Plug the power cord into an outlet| Push Open the lens cover to turn on
projector| Install Batteries (Not included) in the remote control
Connect your device to the projector correctly| Press Source Button and Select
the correct input source| Enter Image Setting to choose four sides (4D
Keystone) /four comer
(4P Keystone) to get rectangle image.
Adjust the focus ring to get the best image performance.| Enter Image Setting
to choose digital 200m to get suitable size| Press the power Button to tum off
the projector
PROJECTOR OVERVIEW
Remote Control
Using Notice!
Note:
- Install 2 pleces of AAA batteries into the remote before using it. Do not combine new batteries with old ones in remote controller which can cause operation failure due to insuficient power supply.
- When using the remote controller, please make sure that the signal transitter of the remote controller aims at nfrared signal receiver of the projector
- If you are not using the remote controller for an extended periodplease take out batteries to prevent batterisieakage.
IF the remoe conrl s, we will rploce it for you for free.
PROJECTION DISTANCE & SIZE
The recommended projection screen is around 80 inches with a distance of
around 9.84ft Dark environment & a good project screen will improve the
clarity of the projected images.
The image size depends on the actual projection environment and screen
distance, there may be deviation among the following data, please
understand!
PROJECTION MODE
If you want to project in different way, please select corresponding mode in
the setting page.
Keep the projector at a height where its lens is axial symmetry to the screen.
If this is not possible, you can use the keystone correction function to
adjust the projection image. When installing the projector in the ceiling, please
purchase a projector mount.
Recommended by an installation professional and follow the instructions that
come with the mount.
NOTE: Projector mount and screw(s) not included!
PROJECTOR CONNECTION INSTRUCTION
1. Select an Input port
You can choose different ports (HDMI/AV/AUDIO/USB) to connnect you need
devices , wihle please choose corresponding input source.
A. HDMI Connection Connected with laptops, DVD players, Blu-ray
players, Chromecast, TV Stick, etc.
B. AV Connection Connected with Portable DVD Players/Video
Player/Set-Top BOX ec.
C. Audio devices Connection Using a 3.5 mm audio cable (not
include), you can connect the projector with an external speaker.
D. USB Connection Insert the USB into the accordingly slot. Go
to Homepage>File Choose the content which you needdisplay: Picture, Audio,
Video, Store.
2. Media Player Setting (Using Path: Homepage >File)
When you are using media player, please choose correct entrance in home page
first. If you enter from Video, it will ONLY detect files of video format in
the USB stick. (The other three interface and so on.)
Note:
- Enter “Store”, all types of files in USB can be read, including PPT, Word, Excel, etc.
- Enter “Store”, this projector supports to connect a keyboard or mouse via the USB inteface for more detailed operations on the opened documents.
- Recommended projection size is within 80inches if enter*Store” to playback file to get the best effect
- The file is bigger, the opening time will be longer, please wait with patience
PICTURE AND SOUND SETTINGS
Press Setiing Button to enter picture and sound setting
A. Picture Settings:
Picture Mode | User / Standard / Vivid / Soft |
---|---|
Brightness | 0-100 |
Contrast | 0-100 |
Saturation | 0-100 |
HUE | 0-100 |
Sharpness | 0-100 |
B. Sound Settings:
Sound Style | User / Standard / News / Music I Movie / Sports |
---|---|
Equalizer Detail | 120Hz |
500Hz | 0-100 |
1.5KHz | 0-100 |
5KHz | 0-100 |
10KHz | 0-100 |
BLUETOOTH SETTING
A. Bluetooth Connection Mode
- Go to[Home Page) >(Setting >(Bluetooth Connection)
- Turn the Bluetooth function ON and Scan the Bluetooth devices nearby automatically
- Choose correct Bluetooth device to connect
Bluetooth Connection Mode : Connect the projector with
external bluetooth speakers
B. Blutooth Speaker Mode
- Press the power button “on remote control, select the Bluetooth Speaker Mode to enter
- Please Turn on the Bluetooth function on your mobile device and search projector devices ;
- After finding the projector device, click to complete the connection to use the projector as a speaker.
Bluetooth Speaker Mode: The projector works as a Bluetooth Speaker
NoTE
- Every e you comnec 0 an extenal speske using the Bletooth fncto, you nsed 10 repalr the comecton.
- If you want o connect your eadphone. speakerwihaucio pot o enerbuetoath speaker mode lease isconnctthe Bluetooth auo devic fom the projeco s,
- Bluetoot Funcion s ONLY ransris uci, Nt uppert vide Sy with smariphone.
Wifi Connection
- Goto Home page > Setting >WIFI Connection
- Tum the WIFI ON and search out the WIFI list by “Add WIFI”
- Choose your WIFI, then enter password to connect
NOTE:
The V511 projector has built-in 5G module, but for have SG WiFi speed, it also
requires the network and router support 5G.
Screen Mirroring
Please Attention:
- You need to ensure that the projector and user equipment (I0S / Android Devices) are in the same wifi environment;
- The user device must download the “Eshare” App
Screen mirroring for I0S / Android Devices.
- Go to Home page >Screen Mirroring
- Follow the interface prompts to download Eshare and complete the connection
- Launch Eshare and Click *share Screen” to realize Screen Miroring
Tips
In Eshare App:
- Share Screen-~Tap *Share Screen” to mirtor your device screen to the projector and realize large display.
- TV Mior”—~Tap “TV Mirror” to mior the screen of the large display to your device, and control the lrge display on your device side.
- When you use “Eshare”to startthe screen mirroring, the phone willbe automaticall silenced. In order to ensure the sound qualty, it you want o increase or decrease the sound, please adjust tthiough the volume buttons on the remote control o the projector machine.
Projector Image Setting
1. Keystone Settings
V511 Projector designed with 4P/4D keystone correction, which can help you
adjust the rectangular picture more
accurately , which brings you better picture experience!
A. 4D Keystone
- Go to [Setting) > (Image Setting) >(Keystone) > (Four sides)
- Press Right or Left ◄ button to acjust the Horizontal keystone angle
- Press Up or Down to adjust the vertical keystone angle
Adjust Horizontal Keystone Angle
Back to home page
Adjust Vertical Keystone Angle
Long Press the menu button to restore the original parameters.
B. 4 Point Keystone
- Go to (Setting) > (Image Setting) > (Keystone)> (Four Corner)
- Press Direction Buttons to adjust the angle, press OK button to jump to the next corer adjustment
Press Ok button to select point you need adjust
Press the arrow keys to adjust Horizontal or Vertical parameters
Back to home page
Long Press the menu button on remote control to restore the original
parameters
2. Digital Zoom
- (Go to) >[mage Setting)>{Digital zoom)
- Choose the Zoom method you need (Horizontal / Vertical / Whole Zoom)
- Press Left button ◄ to Zoom out (100-0) and Right to Zoom in(0-100)
A Horizontal Zoom (Only Adjust Height of projection size)
B. Vertical Zoom( Only Adjust Width of projection size)
C. Whole Zoom (Adjust Heght and Width of projection size)
Trouble Shooting
No sound ?
1. Check if you pressed “Mute” accidentally.
2. Checkif the Bluetooth connected to your Bluetooth device automatically.
3. The projector can’t support Dolbyplease turn off the Dolby audio in your
device.
No Image ?
1. Make sure the power adapter is connected and the working light is on.
2. Please make sure your device is connected to the correct projector
interfaces.
3. Check the lens cover has been removed,
4. Check if the input signal source is correct
Automatic shut-down?
1. Please checking the power cable firmly connected
2. 1t’s Overheating protection to protect the machine from damage Please turn
the projector offto let it cool down for a while, and check f there is
anything blocked the ventilation vents.
3. 1tis recommended to unplug the power supply after use to prolong the
service lfe.
Spots on the screen?
1. Check f there is stain on the lens, if yes, wipe it with a clean & dry
cloth.
2. Check if there is small dust inside the lens, i yes, please shake
theprojector or siightly beat the front panel on the machine a few times to
remove the dust,
Screen keep flicking or stripes appeared on screen
1. Try update the firmware version, please contact the supplier to obtain the
firmware update file.
2. Reset the factory setting and restart again
Bluetooth not work?
1. Please first confirm whether the Bluetooth is connected to other devices
2. Please note the Bluetooth function is not support to connect with a
smartphone or pad etc.
3. Ifthe bluetooth cannot be connected, it may be a compatibility problem,
please send the model of the bluetooth speaker to us for confirmation.
Stuttering when using the wifi function?
1. The fluency of screen miroring with wireless connection will be affected
by your router’s network sp
2. please make sure to connect to good internet, which the WiFi network
should be greater than 50M
3. And prevent the WiFi stream gets overloaded with too many devices
connected o it
The content form HULU, Netflix, and similar services can not be mirrored or
cast?
1. Due to the copyright restriction from Hulu, Netlix, and similar services,
the contents can’ t be mirrored or cast.
2.1f needed to play these videos, please prepare a TV stick, Roku or
Chromecast (not included).
Missing accessories or damaged package?
1. Please contact us first time.
2.1f you have missed any parts or received the broken item in the package, we
will send a new one to you for free
Specification
Display Technology | LCD |
---|---|
Keystone | 4D /4P Keystone |
Aspect Ratio | 16:9 / 4:3 |
Bluetooth | Bidirectional Bluetooth |
Wifi Tech | 2.4G/5G dual band |
Photo Format Supported | jpg .omp jpeg .png .webp gif |
Audio Format Supported | aac adpcm ape dts dtshd eac3 falc mid mpeg pcm vorbis |
ogg avi mp3 mp4 wav mka m4a mov mpg
Total power| 75W
Voltage| AC100-240V/S0-60Hz
Light Source| LED
Native Resolution| 192071080
Internal Speaker| 5W
Installation Type| Table Mount/ Ceiling Mount /Tripod Mount
Unit Dimension| 266 266 110mm (10.47°10.47*4.33inch)
Unit Net Weight| 2.4kg (5.29Ib)
Video Format Supported| AVITS.TP.MOV.DAT.MPG.MPEG. MKV.3GP.MP4VOB.M2TS.XVID.
3GP2.MPEG1.MPEG2.MPEG3. MPEG4.H.263,H.264, H.265.VP8. RV30.RV40
USB Supported Memroy| 128G
Ports| HDMIt/ HDMI2/ USB1/ USB2/AV/ 3.5mm Audio
WARRANTY
BIGASUO provides the following service for each customer:
30-days full refund or free replacement tyear technology support
Lifetime professional consult
If you need any help or want to extend the warranty time for your order,
please email us:
US-projector-51@eitack.com
No worries
After Purchase
BIGASUO Service
BIGASUO V511 USER MANUAL
Documents / Resources
|
BIGASUO V511 1080P Home
Projector
[pdf] User Manual
V511, V511 1080P Home Projector, 1080P Home Projector, Home Projector,
Projector
---|---