ULTIMEA Tapio V 2.1 CH Soundbar System User Manual
- June 13, 2024
- ULTIMEA
Table of Contents
ULTIMEA Tapio V 2.1 CH Soundbar System
Thank you!
Thank you for purchasing Ultimea Tapio V. This guide will help you set up so you can enjoy the ultimate sound experience.
IN THE BOX
DIAGRAM (BUTTONS, PORTS & INDICATOR)
- Power on/off/Mode
- NextSong/Volume+
- USB Input
- AUX Input
- DC 18V IN Jack
- Play / Pause
- Previous Song/ Volume()
- card Input
- Optical Input
- SUB OUT Jack
- LED Indicator: Bluetooth Mooe: Optical Input: Aux Input: , USB Input: .
REMOTE CONTROL
- [ ]: Short press for ls to power on, Hold and press for 3s to power off
- [MODE] : Short press the button to switch input modes among Bluetooth. Optical. Aux, USB and TF Card
- [MOVIE] For movies
- [MUSIC] For music
- [NEWS]: For talk show. interview. news etc to hear dialogues clearly
- [BASS] For movies and music with strong bass
- [GAME] : For playing and watching game
- [LED OFF] Hold the button to turn on/off LED indicator on soundbar
Battery installation
Use remote control
The working range of remote is +/-30° in both Vertical and Horizontal Direction.
USE YOUR SOUNDBAR SYSTEM
PREPARE FOR USE
PLACEMENT
Table placement
Place the sound bar on a solid surface.
Wall Mounting Installation
A. Connect to your TV
Use Remote Control or Side Buttons of Sound bar to change modes.
Note:
- Please make sure to change the TV audio output to External speaker.
- Please make sure to select the Audio Output Format to PCM
- 32 is the maximum volume of the Soundbar.
B. Connect to other devices
Need to purchase one 3.5mm Audio Cable if your tv has 1 male audio output, the included RCA cable is 1 male to 2 male, will not fit
C. Bluetooth mode
SPECIFICATION:
Peak Power: l00W Bluetooth Version: V5.0
Speaker Driver: 2″4 PCS (Sound bar) +4″7 PCS (Subwoofer)
Functional Jack: Optical 1, AUX 1, USB 1, TF 7
Power Supply: DC 18V=2.33A AC 110-240V 50/60 Hz
Soundbar Dimensions: L806w53H60mm / 31.7’2.482.36 In
Soundbar Weight: 1.43 Kg/ 3.15 Lbs
Subwoofer Dimensions: Ll40w124H300mm / 5.574.s8’ll.8l In
Subwoofer Weight: 1.89 Kg/ 4.17 Lbs
Safety Instructions
- Avoid dropping
- Do not disassemble
- Avoid extreme temperatures
- Don’t use the device outdoors during thunderstorms
- Use original or certified cables
- Don’t use any corrosive cleaner/ oil to clean
- The products should not be exposed to dripping or splashing water
FCC Regulatory Compliance
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier Trade Name: Ultimea, Model No. Tapio V
Responsible Party – U.S. Contact Information Substanbo Inc.
Declaration of Conformity
We (Manufacturer is responsible forth is declaration)
Guang DongSubstanbo Technology Co., Ltd. (Company name)
Room 2008, Bd.4, Tianan yungu 2nd Industrial Park, Longgang District Shenzhen,China (Company address)
declare under our sole responsibility that the product
Trade name: Ultimea
Equipment: 2.1 Soundbarsystem
Model No. :Tapio V
to which this declaration relates is in conformity with the essential
requirement set out in the Council Directive on the Approximation of the laws
of the Member States relating to RED Directive(2014/53/EU) & RoHS(2011/65/EU)
product is responsible to affix CE marking, the following standards were
applied:
EN 55032:2015
EN 55035:2017
EN IC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019
ETSI EN 301 489-1 V2.2.3 (2019-11)
Draft ETSI EN 301 489-17 V3.2.0 (2017-03)
EN 300 328 V2.2.2 (2019-07)
EN 62311: 2008
EN 62368-1:2014/A11:2017
IEC62321
Full Name: Lion Liao Position: Approbation Manager
Signature: Place/Date: Shenzhen,China/Apr-28-2022
Correct Disposal of This Product
(Waste Electrical& Electronic Equipment)
This mark shown on the product or its packaging. indicates that this product
should not be disposed with other household wales at the end of its working
life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal. please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household user should contact either the retailer where they purchased this
product, or their local government office. for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contact This product should not be mixed with other
commercial wastes for disposal.
Customer Service
[email protected]
www.Ultimea.com
@Ultimea
Made in China
