matter YX-WS01 WiFi Smart Plug User Manual
- July 6, 2024
- matter
Table of Contents
matter YX-WS01 WiFi Smart Plug
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC-approved for an uncontrolled environment
- Minimum Distance: 20cm between radiator and body
Product Usage Instructions
Installation:
- Place the device on a stable surface.
- Ensure there is a minimum distance of 20cm between the radiator and your body.
- Connect the necessary cables according to the provided diagram.
- Power on the device using the designated power button.
Operation:
- Follow the user manual for specific instructions on device operation.
- Avoid making any changes or modifications not approved by the manufacturer.
- Observe the device for any signs of interference or malfunction.
- If interference occurs, try repositioning the device or adjusting settings.
Maintenance:
- Regularly clean the device using a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or moisture.
- Keep the device away from direct sunlight and dust accumulation.
FAQ
-
Q: Can I modify the device without voiding the warranty?
A: No, any changes or modifications not approved by the manufacturer may void your warranty. -
Q: What should I do if I experience interference with the device?
A: Try repositioning the device to minimize interference, and ensure no other electronic devices are causing the issue.
Product Description
Smart Plugs are developed according to the Matter standard protocol and have passed CSA’s Matter certification. They can be bound and controlled through ecosystem platforms such as Alexa App/Echo, Apple Home App/HomePod Mini, Google Home App/Google Nest Hub and Smartthings App/Samsung Smart Home Hub.
Basic Product Functions
- Voice control: The device can be controlled by voice through Alexa, Siri, Google Assistant, or other devices that have passed Matter certification.
- App control: Device control can be achieved through Alexa, Apple Home, Google Home, Smartthings or other apps that have already solved the Matter SDK.
- Device reset: Press and hold the switch button for 5 seconds to reset, with the indicator light flashing 3 times.
- Device pairing: There is a Matter QR code and an 11-digit shortcode on each device. To bind a device, you can use the matching App to scan the QR code or enter the 11-digit short code for pairing and binding.
Set Up Your Device Via Matter
Add to Alexa via Matter
Check the environment
- The version of the Alexa App is greater than or equal to 2.2.491118.0.
- Having a Matter control hub, any of the following devices can be used:
- Network Configuration 1: FFS or ZTS non-inductive distribution network
- When you buy a product on Amazon, Amazon scans the QR code on the package, and when the device is powered on, it will automatically connect to a nearby Echo.
- Network Configuration 2:
- Step 1: Put the device in pairing mode.
- Step 2: Open the Alexa App, click the “+” icon on the homepage, select “Add Device”, then select “Other”, select “Connect your
Matter Device”. On the last screen shown in the figure below, you can choose whether to scan the QR code or enter the pairing code for pairing, and then scan the code or enter the pairing code as needed to complete the adding process.
Add to Apple via Matter
Check the environment
- The system version of the Apple phone is greater than or includes version 16.2.
- Having a Matter control hub, any of the following devices can be used: Home Pod, Home Pod mini, and Apple TV.
- Join a 2.4G WiFi network, and the WiFi password cannot be blank or hidden WiFi.
After the device is successfully added, the location of the device and the device name can be changed, as shown in the following figure.
Add to Google via Matter
App Distribution Network
Step 1:
Open the Google Home App home page, click “+”, click “Set up device” after the
jump, select “New device” and press the prompt to add a device;
Step 2:
Setting the location of the room to which the device belongs and modifying the
device name after the device is successfully added; 
Add to Samsung via Matter
Check the environment
- The version of the Smartthings App is greater than or equal to 1.8.01.22.
- Having a Matter control hub, any of the following devices can be used: Smartthings Station, Smartthings hub.
- Join a 2.4G WiFi network.
Network configuration
- Step 1: Put the device in pairing mode.
- Step 2: Open the Smartthings App, if your phone supports automatic device discovery, you can simply click “Add” to connect. Otherwise, you can click the “+” icon on the Devices page, select “Scan QR code”, and use the QR code to scan the device or use the pairing code for pairing (also need to click “Enter setup code” to enter the pairing code pairing interface), and then follow the prompts to add it.
QR code pairing interface if the device is automatically discovered:
QR code pairing interface if discovering the device manually:
Pairing code pairing interface if the device is automatically discovered:
Pairing code pairing interface if discovering the device manually:
Step 3:
Setting the location of the room to which the device belongs and modifying the
device name after the device is successfully added. After the download is
complete, the app will automatically redirect you to the control page of the
device.
Plug Control
App Control
Once the plug is paired, the App can be used to control the on/off switch of the device:
Voice Control
-
Alexa voice control
Turn on/off the device: Alexa, turn on/off the Plug -
Siri voice control
Turn on/off the device: Hey Siri, turn on/off the Plug -
Google Voice Control
Turn on/off the device: Hey Google, turn on/off the Plug
Plug Sharing
Sharing Alexa with other ecosystems
Enter the device interface and click the gear icon in the upper right corner
to enter the settings interface, select “Other Assistants and Apps”, and then
select “Add Another”.
Sharing Apple with
other ecosystems
On the device control interface, scroll down to the bottom and select “Open
Pairing Mode” to share the pairing code.
Sharing Google with other ecosystems
Long press on the home screen to enter the device control interface, click the
gear icon in the upper right corner to enter the settings, select the
connected Matter application and service, and then select “Connect to Other
Apps and Services” and choose to share the pairing code or QR code.
Sharing Samsung with other ecosystems
Enter the device control interface, click the edit icon in the upper right
corner and select “Share with other services”, you can share the pairing code
and QR code after clicking “QR code”
Accepting shares from other ecosystems
- If sharing from Alexa to the Apple platform, first put the device in sharing mode according to 4.1, and then refer to the instructions in the 2.2 module to use the Apple ecosystem to configure the network. Sharing with other ecosystems is also a similar operation.
- First, put the device in sharing mode, and then use the accepted ecosystem to configure the network. Note that some ecosystems may only be able to share pairing codes or QR codes, so be sure to use the pairing code for configuration.
Precautions for each ecological use
Why does my device fail to distribute the network?
- Please confirm whether the mating phone and the eco-speaker are in the same WiFi LAN;
- Confirm whether the router is set up with AP isolation (each connected device cannot communicate with each other to play the role of isolation), non-2.4G band, while the Apple phone can not be mated to the routing network without a password or SSID containing spaces;
- The speaker may be in a dormant state for a long time idle, you can try to restart the speaker;
- Echo speaker has a function to remember the password, if the router WiFi password has been adjusted, it is recommended to clear the App so that the speaker with the network to use the original password, try to reset the speaker and App;
Why can’t my device enter sharing again after I quit sharing
Apple and Alexa have a single sharing timeout limit, 5 minutes for Apple and
15 minutes for Alexa. You cannot start sharing again before the timeout, so
you can power down the device and turn on sharing again after the device is
reconnected.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>