DARK MATTER 43548 32 Inch Gaming Display User Manual

43548 32 Inch Gaming Display
User Manual

32″ Gaming Display
PN 43548

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference.

• This device is intended for indoor use only.
• Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the device. If moisture does get in or on the device, immediately remove it from its power source and allow it to fully dry before reapplying power.
• Do not touch the device, the power cord, or any other connected cables with wet hands.
• Do not place the monitor on an unstable surface where it could fall and cause either personal injury or damage to the monitor and/or other equipment.
• Do not expose this device to excessive vibration or extreme force, shock, or fluctuations in temperature or humidity.
• Do not expose this device to excessively high temperatures. Do not place it in, on, or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
• Do not block the ventilation holes in the monitor’s casing. Do not place the monitor in a confined space with inadequate ventilation. Periodically check the ventilation holes to ensure they do not become clogged with dust, debris, or nearby items.
• Do not place or install this device in an area where it can be exposed to excessive amounts of dust, humidity, oil, smoke, or combustible vapors.
• Use only in a well-ventilated area. Do not use in close, confined spaces.
• Prior to operation, check the unit and power cord for physical damage. Do not use if physical damage has occurred.
• Before plugging the unit into a power outlet, ensure that the outlet provides the same type and level of power required by the device.
• Unplug this device from the power source when not in use.
• Take care to prevent damage to the power cord. Do not allow it to become crimped, pinched, walked on, or become tangled with other cords. Ensure that the power cord does not present a tripping hazard.
• Never unplug the unit by pulling on the power cord. Always grasp the connector head or adapter body.
• Ensure that power is turned off and disconnected before making any electrical connections.
• Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water.
• This device has no user-serviceable parts. Do not attempt to open, service, or modify this device.
• Do not leave a single image on the display for a long period of time. Doing so could cause a “burn-in” of the image. It is recommended to use a variable desktop background and to use a screen saver to prevent “burn-in”. Alternatively, ensure that the monitor is powered off for at least 2 hours out of every 12.
• Keep the original foam packaging material for use when installing or removing the included stand.

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com. Check the website for support times and links.

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement.

• 1x 32″ Gaming Monitor
• 1x Stand Stem
• 1x Stand Base
• 3x M4x16 Screws
• 1x DisplayPort® Cable
• 1x AC Power Adapter
• 1x AC Power Cord
• 1x User’s Manual

PRODUCT OVERVIEW

Connections

1. DC: DC barrel connector for connecting the included AC power adapter.

2. HDMI1: HDMI® input for connecting a video source device.

3. HDMI2: HDMI input for connecting a video source device.

4. DP1: DisplayPort® input for connecting a video source device.

5. DP2: DisplayPort input for connecting a video source device.

6. EARPHONE: 3.5mm audio jack for connecting headphones, an external amplifier, or a pair of powered speakers.

7. POWER LED: The POWER LED illuminates solid blue when the monitor is powered on. The POWER LED illuminates solid red when the monitor is in standby mode. The POWER LED flashes red when the monitor is in energy-saving mode.

8. ROCKER: Use the ROCKER to control the monitor:

• PRESS: With the monitor powered off, momentarily press the ROCKER to turn the monitor on. With the monitor powered on, press and hold the ROCKER for 3 seconds to turn the monitor off.
• UP: When a menu is not displayed, push the ROCKER up to cycle through the inputs. When the top level of the OSD menu, the Brightness menu, or the Volume menu is displayed, push the ROCKER up to exit the menu. When a submenu is displayed, push the ROCKER up to return to the previous menu. If editing a value, push the ROCKER up to exit editing and cancel any changes.
• DOWN: When a menu is not displayed, push the ROCKER down to enter the OSD menu. When the OSD menu is displayed, push the ROCKER down to enter the highlighted submenu or to edit the highlighted option. If editing a value, push the ROCKER down to exit editing and save the changes.
• LEFT: When the OSD menu is not displayed, push the ROCKER left to display the Brightness adjustment menu. When the OSD menu is 6 displayed, push the ROCKER left to move the highlight left. When editing a value, push the ROCKER left to decrease the value.
• RIGHT: When the OSD menu is not displayed, push the ROCKER right to display the Volume adjustment menu. When the OSD menu is displayed, push the ROCKER right to move the highlight right. When editing a value, push the ROCKER right to decrease the value.

STAND INSTALLATION

Perform the following steps to install the stand.

1. Using the three included M4x16 Screws, attach the Stand Base to the Stand Stem.

2. Spread a blanket or towel on a flat surface, then place the monitor face down on the cushioned surface.

3. Remove the screws that are holding the protective plate on the back of the monitor, then remove the plate. Place the protective plate in a safe place for future use.

4. Insert the monitor plate on the stand assembly into the opening on the back of the monitor, then secure it in place using the screws removed in the previous step.

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com or through email by sending a message to tech@monoprice.com. Check the website for support times and links. To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and type the P/N into the search bar. If available, support files are linked at the bottom of the product page.

SPECIFICATIONS

REGULATORY COMPLIANCE

Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES-003.MonopriceTM, Dark matter, the Dark Matter logo, and all Monoprice logos are trademarks of Monoprice Inc. HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. VESA®, DisplayPort®, and the DisplayPort logo are registered trademarks of the Video Electronics Standards Association.

TECHNOLOGY AT PRICES THAT MAKE SENSE

Need Help? We’re here for you! Contact us www.monoprice.com/contactus
Product pictures are for reference only.
Specifications described herein are subject to change without prior notification.
All trademarks are the sole property of their respective companies.
Dark matter is a Sub-brand of Monoprice Inc.
Copyright © 2021 Monoprice, Inc.
All rights reserved. www.monoprice.com

References

• HDMI Cable, Home Theater Accessories, HDMI Products, Cables, Adapters, Video/Audio Switch, Networking, USB, Firewire, Printer Toner, and more! - Monoprice.com
• Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>