HOMCOM 839-239 Modern TV Stand Instruction Manual
- June 1, 2024
- HOMCOM
Table of Contents
HOMCOM 839-239 Modern TV Stand
Product Specifications
- A: 24
- B: 15*12 +1(spare)
- C: 8*30 +1(spare)
- D: 7*47 +1(spare)
- E: M4*55
- F: 5*17
- G: 3.5*14 +1(spare)
- H: 29*25
- I: M4*18 +1(spare)
- J: M6*12 +1(spare)
- K: M6*23
- L: 4 x 15*12
Product Usage Instructions
Assembly Steps
- Identify all components labeled A-L from the specifications.
- Refer to the manual for the correct sequence of assembly.
- Use the provided spare parts as needed during assembly.
Installation
- Select a suitable location for installation.
- Follow the installation instructions provided in the manual.
- Ensure all parts are securely attached before use.
Maintenance
Regularly check for loose parts and tighten if necessary. Clean the product
with a damp cloth and mild detergent.
FAQs (Frequently Asked Questions)
-
Q: How do I know which spare parts to use during assembly?
A: The spare parts are labeled accordingly in the specifications section. Refer to them when needed. -
Q: Can this product be used outdoors?
A: This product is designed for indoor use only. Avoid exposure to outdoor elements. -
Q: What tools are required for assembly?
A: Basic tools such as screwdrivers and wrenches are typically required. Refer to the manual for specific tool requirements.
OVERVIEW
Tools Recommended
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
IF HAVE THIS ACCESSORY
NOTE DIFFERENT MODELS
- QUICK FIT : Tighten quickfit until the shoulder is flush with the panel. Do not overtighten or under-tighten.
- CAM LOCK : When fitting the cam lock, ensure the starting position is correct before you insert the connecting quickfit.
- The quickfit head should be in the center of the cam lock when the two panels are joined.
- The Cam lock should be inserted before quickfit.
- It may be necessary to adjust the hinges so that the doors align. Use the instructions below as a guide.
- To adjust the door vertically loosen the screw shown and move up and down as needed.
- To adjust the gap from the door to the main frame turn the screw clockwise or anti-clockwise as needed.
- To adjust the door laterally adjust the screw as shown by turning clockwise or anti-clockwise
- Please fix the other screws
- The buckles have N optional adjustment
- Adjust up and down for balance
PARTS
HARDWARE PARTS
INSTALLATION
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
[email protected]
Imported by Aosom LLC 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA