Vantron M081 8 Inch Anrdoid Rugged Industrial Tablet Instruction Manual

Vantron M081 8 Inch Anrdoid Rugged Industrial Tablet

Product Information

Specifications

• Product Name: M082
• Product Version: 1.0
• Release Date: 2023-9-21

Product Usage Instructions

Safety Precautions
It is essential to follow safety precautions to prevent injury, electric shock, fire, or damage to the device:

• Read and comply with all operation instructions, warnings, and information provided.
• Avoid inserting items into the device slots.
• Use the unit with an indoor-use antenna only.
• Ensure proper ventilation for the device.
• Do not attempt to repair the product unless instructed in the manual.
• Avoid placing the device near heat sources.

Power Source Instructions
Follow these guidelines for using the power source:

• Use a power source that meets the voltage requirements specified in the manual.
• Do not short-circuit the lithium battery when the external power source is removed.
• Avoid placing cables in areas with a risk of damage.

Cleaning Instructions
Proper cleaning methods for the device:

• Power off the device before cleaning.
• Clean with a damp cloth; do not use spray detergent.
• Do not clean exposed electronic components without a dust collector.
• Contact technical support if the device is damaged or experiencing high temperatures.

Frequently Asked Questions (FAQ)

• Q: Can I use an outdoor antenna with the M082 unit?
  A: No, it is recommended to use an indoor-use antenna only to ensure proper functionality and safety of the device.

• Q: What should I do if the device temperature becomes excessively high?
  A: Power off the device immediately and contact technical support for assistance.

For any question, please contact Chengdu Vantron Technology, Ltd. Copyright © Vantron Technology, Ltd. All rights reserved.

Change History
This table describes the version and release date.

Foreword

Copyright

• While all information contained herein has been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual.
• Vantron reserves all rights of this manual, including the right to change the content, form, product features, and specifications contained herein at any time without prior written notice.
• The trademarks and registered trademarks in this manual are properties of their respective owners. No part of this manual may be copied, reproduced, translated or sold. No changes or other purposes are permitted without the prior written consent of Vantron.
• Vantron reserves the right to all publicly released copies of this manual.

Symbol Conventions
The symbols that may be found in this document are defined as follows.

Statement & Disclaimer

• It is recommended to read and comply with this manual which provides important guidance and helps decrease the danger of injury, electric shock, fire, or any damage to the device.
• Vantron assumes no legal liability for accidents resulting from failure to conform to the safety instructions.

Limitation of Liability/Non-warranty

• For direct or indirect damage to this device or other devices of Vantron caused by failure to conform to this manual or the safety instructions on the device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty. The device should be installed, debugged and maintained by professionals.

• The outside antennas are not permitted to be installed or to be changed by
  non-professionals. To run the device normally, only specified antennas are approved to be assembled by professionals.

• Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoors.

Safety Instructions

• Keep and comply with all operation instructions, warnings, and information.
• Pay attention to warnings on this device.
• Read the following precautions to decrease the danger of injury, electric shock, fire, or any damage to the device.
• Operations and service instructions are provided with the equipment.
• Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoors.
• The maximum operation temperature is 60°C.

Precautions

• Pay attention to the product labels/safety instructions printed on silk screens.
• Do not try repairing this product unless declared in this manual.
• Keep away from heat sources, such as heaters, heat dissipaters, or engine casing.
• Do not insert other items into the slot (if any) of this device.
  • Ensure ventilation of the ventilation slot.
  • System fault may arise if other items are inserted into this device.
• Installation: ensure correct installation according to instructions from the manufacturer with recommended installation tools.
• Ensure ventilation and smoothness according to relevant ventilation standards.

Safety Instructions for Power Cables and Accessories

• Use Proper power source only. Start only with a power source that satisfies the voltage label and the voltage necessary according to this manual. Please contact the technical support personnel of Vantron for any uncertainty about the requirements of the necessary power source.
• Use a tested power source. This product still contains a button lithium battery as a real-time clock after its external power source is removed and therefore should not be short-circuited during transportation or placed under high temperatures.
• Place cables properly: Do not place cables at any place with extrusion danger.

Cleaning Instructions

• Please power off before cleaning the device.
• Do not use spray detergent.
• Clean with a damp cloth.
• Do not try cleaning exposed electronic components unless with a dust collector.
• Support for special faults: Power off and contact technical support personnel of Vantron in case of the following faults:
  • The device is damaged.
  • The temperature is excessively high.
  • The fault is still not solved after operations according to the manual.

Introduction

Product Description

• Vantron offers both ARM and ATOM based Single Boards Computer (SBC) platforms including Cirrus Logic EP9315, RockChip RK3128, RK3368, RK3288, RK3399, RK3566, Freescale iMX6, iMX8, TI OMAP35xx CortexA8 series, and Intel Skylake and ApolloLake processor boards. In addition to offering the standard SBCs, we also provide professional customization board design services. Our seamless project management, efficient error-free development process, strong fundamentals in technology, sufficient human resources, and on-time delivery will guarantee the success of your project development.
• Based on the idea of “Application Ready” products and services, our embedded computers have an embedded basic operation system that includes the drivers of their interfaces. So it is easy to use by adding your application software only. It can speed Time to Market your products, and save more costs.

Connector Description
This table respectively describes the valid signal of connectors on the Vantron board.

Overview

Introduction
M082 is a Ruggedized Tablet computer designed for industrial application. This product is based on RK3566 which has Quad-cores and one of them is Cortex-A55 with a maximum clock frequency of 1.8GHz, supporting 8″ LCD and capacity touch screen.

Feature

Specification

System

| ****

CPU

| Rockchip RK3566, Quad core, ARM Cortex-A55,

1.8GHz (Max)

GPU| Mali-G52
Memory| 4GB or 2GB Optional
Storage| 32GB or 16GB Optional
EEPROM| 2Kbit, For Device information

Media

| ****

Display

| 8” LCD, Resolution1280x800. Colour depth: 16.7M.

brightness: Typical 250 cd/m2

TP

| Capacity Touch screen, support 10 points and double tap to wake up

Camera

| Front Camera, 500W Pixel, Auto Focus, MIPI 4Line interface.

Audio

| ****

1×3.5mm Audio Jack, 4 sections. Stereo output, Mic input. Internal Mic. Support 2x 0.8W/8R Speaker. Codec IC： ES8388. support FM audio by RDA5807FP.

I/Os

| ****

USB

| USB2.0 Type-C. Support OTG, Debug and Image Download. Support PD up to 18W.

Button

| Internal Reset button for Debug. External Power/Vol+/Vol- Button. The device charges when the USB power plug in.
Wireless| Wi-Fi & Bluetooth| Wi-Fi 802.11 ac/a/b/g/n + BT 5.0
NFC| Optional
Sensor| Fingerprint

Sensor

| Optional
G-Sensor| Accelerometer, KXTJ3-1057
Debug CON| UART| UART TTL level. 1x4x2.0mm Hole.
Watchdog| Watchdog| Support by CPU RK3566
RTC| RTC| Supported
Software| OS| Android 11

Power

|

Power input

| Type-C USB power input supports 5V/3A.Support 9V/2A PD Fast Charge. Wireless charge, support 9V/15W by SY65153
---|---|---
Adapter| Adapter Type-C 5V/3A or 9V/2A.
Power indicator LED| Yellow: Charging Red: Low power Green: Charged
Battery| Single Li-ion battery: 8000mAh/3.8V
Mechanical| Dimensions| 235x153x21mm

Environment Condition

| Temperature| Operating: -10℃~+60℃ Storage: -20℃~+70℃
Humidity| Operating: RH 20%-80%

Storage: RH 5%-90%

Order Information

M10 Pro

| ****

-2: NFC supported

-1: NFC not supported

| -x2: Light/proximity sensor supported

-x1: Light/proximity sensor not

supported

| ****

-xx2: 9V/2A fast charge

-xx1: 5V/2A standard charge

Example

| M10 Lite-221: 2GB DDR and Wi-Fi ac/a/b/g/n & BT5.0, 4000mAH battery M10 Pro -112: No NFC, no light/proximity sensor, but 9V/2A fast change

Hardware Instructions

Appearance

Structure
Download the board structure document from Vantron technology or Vantron net site: www.vantrontech.com.cn.

Hardware Function Description

This chapter mainly describes the main hardware functions of this product, including WIFI/BT, Audio, Display, Camera, Battery and Charging and NFC.

WIFI/BT
The wireless module inside the tablet complies with IEEE 802.11 a/b/g/n/ac standard and it can achieve up to a speed of 433.3 Mbps with a single stream in 802.11ac connection to the wireless LAN. The integrated module provides an SDIO interface for Wi-Fi and Bluetooth.

Features:

• Dual-band 2.4/5 GHz 1×1 20/40/80 MHz IEEE 802.11a/b/g/n/ac.
• Spreadtrum Extreme provides QAM-256 in the 2.4 GHz band to improve the 33%PHY data rate.
• Spreadtrum Chorale antenna sharing and coexistence solution delivers excellent Wi-Fi, Bland Bluetooth 5 concurrent operation performance in a compact and cost-effective system design.
• Spreadtrum Green Wi-Fi provides excellent low-power consumption features in Wi-Fi normal operation and low-power states.
• Supports IEEE 802.11 FTM, Wi-Fi Location and timing measurement.
• Supports WMM-PS QoS, Wi-Fi Direct, Miracast R2, Passpoint 2.0, Wi-Fi Aware, etc.
• Supports WEP, WPA/WPA2/WPA3-Personal/WPA3-Enhanced Open, WPS 2.0, WAPI, WPI-SMS4, EAP-TLS/EAP-TTLS/EAP-PEAP/EAP-SIM/EAP-AKA/EAP-AKA, IEEE 802.11w Protected Management Frame.
• Complies with IEEE 802.11 d/e/h/i/k/r/u/v/z.
• Supports single channel.
• Supports background scan, ARP, TCP/UDP checksum offload, and IPv6 NS/RA offloading.
• Bluetooth 5, Bluetooth Smart Ready compliant.
• Bluetooth classic and low-energy dual mode concurrent operation.
• Supports LE 2 Mbps, LE Advertise Extension, Long Range, AoD Rx Direction Finding and Mesh.
• Integrated 10 dBm high-efficiency on-chip PA for low-energy application.
• Integrated 20 dBm high power on-chip PA for Bluetooth high power mode application.
• Integrated wide-band speech processing to improve voice quality.
• Supports Low-energy background scans for context awareness applications.
• Supports multiple piconets and up to 8 concurrent Bluetooth Low Energy concurrent links.

Audio
M082 has a 3.5 mm Headphone jack, two 0.8W speakers and a Mic. The headphone jack supports stereo output and it can drive-by-wire control and mic function. If you want to use both of these features, your headphones must support them, too. Our headphone jack is compatible with three-section headphones and four- section headphones. It also supports FM.

Display
M082 has an 8″ screen. The screen is made up of a display screen and a touch screen. More parameters are shown in the table.

Item Specifications                      Unit

Screen Size

Viewing direction

| 8″| Inch
Full View| –
Resolution

Display Mode

| 800×1280

Normally Black

| –
–
Number of Colors

LCM Luminance

| 16.7M| –
250( Typ. )| cd/m2
Contrast Ratio

Interface

| 1500:1

MIPI

| –
–
Touch Screen| Cap-touch, 10-point

Camera
M082 has a front camera. The camera has 5 million pixels with autofocus and 2 line MIPI interface. Maximum image transfer rate:

• QSXGA(2592X1944):15 fps
• 1080p:30 fps
• 960p:45 fps
• 720p:60 fps
• VGA(640×480):90 fps

Battery and Charging
M082 has a powerful 8000 mAh battery. The time to play the video, listen to the music and standby is not confirmed. It theoretically supports 5V/3A charging and 9V/2A fast charging. It also supports a maximum of 15W wireless charging.

Note:
Please use the Vantron-provided charger.

NFC
M082 has a NFC feature, which is an optional feature. If the customer needs it, we can provide it. It Supports 40mm away identification for tag1,42mm for tag 2 and 22mm for tag 4.

Hardware Operation Note

This chapter provides a guide to set up and use some of the features of the tablet. For more details, see the hardware description.

Power Preparation

Environment
Before the equipment is powered on, please confirm whether the environmental conditions meet the requirements. Environmental conditions are as follows:

• Operation Temperature: 0°C ~ +60°C
• Operation Humidity: 20-85%RH (Non-Condensation)

Type-C Power Input
Please confirm the power input is 5V or 9V, and the reference current is 3A or 2A.

Do not use unauthorized or incompatible power adaptors to charge the device, otherwise, fire, explosion or other danger may be caused.

Wireless Charging
Please confirm the wireless power transfer support QI standard. To achieve maximum 15W charging, the wireless power transfer must support 15W power transfer.

Antenna
The design of the internal antenna position of M082 will be shown as follows:

Figure 5-1 Internal antenna

To ensure that the tablet functions can work properly, please do not cover the antenna area with metal shielding devices.

Note:
WIFI and BT antenna frequencies are 2.4G and 5G respectively.

Parts Description

USB Power Adapter

Appearance

Interfaces

Structure

Hardware Instructions

Specifications

Product Name| AC/DC ADAPTER
MODEL No.| MX15U-0503000UU
Interface Type| USB Type-A ( Female )
Input Parameter| 100-240V ~ 50-60 Hz 0.5A
Output Parameter| 5 VDC 3A
Product Dimensions| 40 x 24 x 55 mm (Pins are not included )
Operating Temperature| 0℃-40℃

Software Instructions

M082 has been pre-loaded firmware. For more information, please refer to the software user manual for software operation.

Important Tips

Waste Disposal
It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed of according to local regulations on waste disposal. Do not throw batteries into a fire (explosive) or put them in the common waste canister. Products or product packages with the sign “explosive” should not be disposed of like household waste but delivered to specialized electrical and electronic waste recycling/disposal centres. Proper disposal of this sort of waste helps avoid harm and adverse effects on surroundings and people’s health. Please contact local organizations or recycling/disposal centre for more
recycling/disposal methods of related products.

Comply with the following safety tips:

• Do not use in combustible and explosive environments

• Keep away from combustible and explosive environments for fear of danger.

• Keep away from all energized circuits.
  Operators should not remove the enclosure from the device. Only the group or person with factory certification is permitted to open the enclosure to adjust and replace the structure and components of the device. Do not change components unless the power cord is removed. In some cases, the device may still have residual voltage even if the power cord is removed. Therefore, it is a must to remove and fully discharge the device before contact to avoid injury.

• Unauthorized changes to this product or its components are prohibited. To avoid accidents as far as possible, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical department of Vantron or local branches for help.

• Pay attention to caution signs.
  Caution signs in this manual remind us of possible danger. Please comply with the relevant safety tips below each sign. Meanwhile, you should strictly conform to all safety tips for the operation environment.

• Notice
  Considering that reasonable efforts have been made to assure the accuracy of this manual, Vantron assumes no responsibility for possible missing contents and information, errors in contents, citations, examples, and source programs.
  Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in the form of photocopy, tape, broadcast, e-document, etc.

FCC compliance statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

RF exposure information and statement:
This device meets government requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through the evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of the USA (FCC) is 1.6W/Kg averaged. Has also been tested against this SAR limit. SAR information on this and other pads can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device’s FCC ID number for the search. To maintain compliance with FCC RF exposure requirements, the use of belt clips, holsters and similar accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

How to Contact Us

If you have any problem or want to know more about our products, visit www.vantrontech.com or contact us.

US Office: Vantron Technology, Inc.

• Address: 440 Boulder Court, Suite 300, Pleasanton, CA 94566, USA
• Tel: 925-621-8758
• Email: sales@vantrontech.com

China Office: Chengdu Vantron Technology, Ltd

• Address: 6th Floor, 1st Building, No.9, 3rd Wu Ke East Street, Wu Hou District, Chengdu 610045, China
• Tel: 86-28-8512-3930/3931, 8515-7572/6320
• Email: sales@vantrontech.com.cn.

References

• Vantron Technology
• 成都万创科技股份有限公司

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>