LYPERTEK C3 Cheap Wireless Earbuds User Guide

: June 1, 2024
: LYPERTEK

Table of Contents

C3 Cheap Wireless Earbuds
Specifications:
Product Usage Instructions:
How to Reset:
Multi-Point Connection:
- FAQ:
Q: How do I activate the voice wake-up feature?
Q: Can I use the foam tips for swimming?
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

C3 Cheap Wireless Earbuds

“`html

Specifications:

Weight: 105g
Dimensions: 100x100mm, 400x100mm
Voice wake-up feature
Button for control
Multi-point connection capability

Product Usage Instructions:

How to Reset:

Put PUREPLAY C3 into the charging case.
Press the button five times.

Multi-Point Connection:

Connect the first device.
Turn off Bluetooth on the first device.
Connect the second device.
Turn Bluetooth back on for the first device.

This allows both devices to be connected simultaneously in a
multi-point Bluetooth configuration.

FAQ:

Q: How do I activate the voice wake-up feature?

A: Press and hold the button for 2 seconds to activate the voice
wake-up feature.

Q: Can I use the foam tips for swimming?

A: No, we recommend not using the foam tips for swimming as they
may absorb water.

“`

:105g / 100x100mm ,400x100mm

Voice wake-up

2 5
2 2
2

Button
HOW TO RESET:
1.Put PUREPLAY C3 into the charging case; 2.Press 5 times on the button.
MULTI-POINT CONNECTION:
1.Connect the first device 2.Turn off Bluetooth on the first device 3.Connect the second device 4.Turn Bluetooth back on for the first device This allows both devices to be connected simultaneously in a multi-point Bluetooth configuration.

6

LYPERTEK C3

4 M Foam Tips

XS, S, M, L Silicone Tips 6

Touch Control Area LYPERTEK C3 Indicator

QUICK START GUIDE
FCC ID: 2AW9I-C3

<1m

LYPERTEK C3

Put LYPERTEK C3 into Charging Case

Take out LYPERTEK C3 from Charging Case , it will enter

the pairing mode automatically.

LYPERTEK C3

phone.

LYPERTEKC3

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.