TECKNET TK-HS004 Bluetooth Headset User Manual

Bluetooth Headset

TK-HS004
User Manual

Congratulations

Thank you for purchasing your new TK-HS004 Bluetooth Headset. This user manual will provide you with all of the information you need to get started with your Headset.
If you have any problems setting up or using your Bluetooth Headset, please contact us by email at: [email protected]
Please read this manual carefully before using the product and keep it properly. Alternatively, solutions to common problems can be found in the FAQs section at the end of this manual.

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Shenzhen Unichain Technology Co., Ltd is under license. Other trademarks and trade names are those of their respective owners.

Package Contents

Specifications

1. Standby Time: About 200 hours
2. Talking Time: About 16 hours
3. Charging Time: 2 hours
4. Headset Battery Capacity: 3.7V 180mAh
5. Charging Input: 5V ≤ 300mA
6. Bluetooth Version: V5.0

• Some parameters may vary due to the environment and the time of music played.

Charging

Function Button

Connection with One Device

1. Long press MFB until the blue and red indicator lights flash alternately to pair with your first device.
2. Search and click to connect to”TIK-HS004″ on the Bluetooth list of your phone. The LED will change to Blue and flash slowly after connection.

Connection With Two Devices

1. Pair with your first device.
2. Turn off the Bluetooth of the first device.
3. Long press headset to enter into pairing mode and pair with your second device. The blue light will flash slowly after successfully connected.
4. Turn on the Bluetooth of the first device, and manually connect ” TK-HS004″ in the paired list After the connection is successful, your headset is connected to the two Bluetooth devices at the same time (If the first device is the 105, then you need to manually connect If it is Android, it can be automatically connected )

Tips:
Music only can be played from one phone under the dual connection status. If you want to play music from another phone, you need to pause or turn off the music of the previous phone. If you want to answer a new call from another connected phone, you need to hang up the current call of the previous phone.

Call / Music Setting on PC

1. If you want to make calls on the Windows system with this headset, please follow the steps below and make sure you’ve connected to the headset successfully. After paring the headset to your PC, enter the Control Panel —-Sound —- Set Bluetooth Hands-free Audio as the default audio device. Set Bluetooth Audio Input Device as the default microphone device. Once the default device has been set correctly, please confirm that the default device of the calling software you use also has been set correctly (if there is no sound for the first time use, double-click the MFB to activate the headset).
2. If you want to listen to music on the Windows system with this headset, please follow the steps below and make sure you’ve connected to the headset successfully. After paring the headset to your PC, enter the Control Panel —-Sound —- Set Bluetooth Audio Renderer as the default audio device. Set Bluetooth Audio Input Device as the default microphone device.

FAQs

Q. How to Pair if Failed?
A: In standby mode, hold the MFB and Volume+ button simultaneously for 5s to clear the paring record. Then long press the MFB until blue and red indicator light flashes alternately to pair again.
Q. Any Password Needed when Pairing?
A: If needed, please try 0000 or 8888, 1111, 1234.
Q. How Can I Charge My Headset?
A: You can charge it via the USB cable.
Q. How to Restart the Headset if Failed?
A: Try to charge it via USB cable and then restart it.

Limited 18-Month warranty

What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TeckNet product that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unichain warrants the TeckNet product for 18 Months.
What will we do to correct problems?
Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the TeckNet product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TeckNet product has been improperly installed, altered in any way, or tampered with. The TeckNet Product

Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty
Please contact retailers or visit TeckNet website www.tecknet.co.uk for more information.
Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

SIMPLIFIED EU DECLARATION OF CONFORMITY

The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the radio equipment type TK-HS004 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.tecknet.co.uk/support

FCC Statement

Operation is subject to the following three conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. (3) This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

http://www.tecknet.co.uk

EU Importer: UE Fast Refund GmbH
EU Importer Address: Friedrich-Alfred-Strafe 184 Duisburg 47226 Deutschland
http://www.tecknet.co.uk
[email protected]
Manufacturer: Shenzhen UniChain Technology Co., Ltd
Manufacturer Address: 201, 111-3, Huangjinshan District, Bantian Community, Bantian Street, Longgang District, Shenzhen, China
UE Fast Refund GmbH
Friedrich-Alfred-Stra8e 184 Duisburg 47226 Deutschland
+49 (0)211-97538868
[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>