Genmitsu LC-40 10W Laser Module User Manual

Genmitsu LC-40 10W Laser Module

Remove the Cable Clips

STEP 1

1. Unscrew the screw of cable clip A on the laser module.
2. Remove cable clip B, then remove the cables of the laser module.
   

Removing the Original laser module

STEP 2

Unscrew the M3•6 screws on the mounting plate and remove the original laser module.

Install 10W laser module

STEP 3

Install the 10W laser module on the mounting plate by tightening the M3•6 screws from the original laser module.

Install the Cable Clips

STEP 4

1. Install cable clip B and cable clip A back with the screw.
2. Install the cables back in the same condition as ii was removed.
   

Finishing I

Documents / Resources

| Genmitsu LC-40 10W Laser Module [pdf] User Manual
LC-40 10W Laser Module, LC-40 10W, Laser Module
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>