Vantron VT-TABLET-5081S Tablet User Manual

VT-TABLET-5081S Tablet
User Manual

For any questions, please contact Chengdu Vantron Technology, Ltd.
Copyright © Vantron Technology, Ltd. All rights reserved.

Change History

This document describes VT-TABLET-5081S briefly and is intended for all readers. This table describes the version and release date.

Foreword

Copyright

While all information contained herein has been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual.
Vectron reserves all rights to this manual, including the right to change the content, form, product features, and specifications contained herein at any time without prior written notice.
The trademarks and registered trademarks in this manual are properties of their respective owners.
No part of this manual may be copied, reproduced, translated, or sold. No changes or other purposes are permitted without the prior written consent of Vantron.
Vectron reserves the right of all publicly-released copies of this manual.

Symbol Conventions
The symbols that may be found in this document are defined as follows.

harm to personnel

Statement & Disclaimer
It is recommended to read and comply with this manual before operating VT- TABLET-5081S which provides important guidance and helps decrease the danger of injury,  electric shock, fire, or any damage to the device.
Vectron assumes no legal liability of accidents resulting from the failure of conforming to the safety instructions.

Limitation of Liability/Non-warranty

For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on the device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty.
VT-TABLET-5081S should be installed, debugged, and maintained by professionals.
The outside antennas are not permitted to be installed or to be changed by non-professionals. To run the device normally, only specified antennas are approved to be assembled together by professionals.
Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoor.

Safety Instructions

• Keep and comply with all operation instructions, warnings, and information.
• Pay attention to warnings on this device.
• Read the following precautions so as to decrease the danger of injury, electric shock, fire, or any damage to the device.
• Operations and service instructions are provided with the equipment.
• Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoor.
• The maximum operating temperature is 40°C.

Precautions

• Pay attention to the product labels/safety instructions printed on silkscreens.
• Do not try repairing this product unless declared in this manual.
• Keep away from the heat sources, such as heaters, heat dissipaters, or engine casing.
• Do not insert other items into the slot (if any) of this device.
• Ensure ventilation of the ventilation slot.
• System fault may arise if other items are inserted into this device.
• Installation: ensure correct installation according to instructions from the manufacturer with recommended installation tools.
• Ensure ventilation and smoothness according to relevant ventilation standards.

Safety Instructions for Power Cables and Accessories

Use a Proper power source only. Start only with a power source that satisfies the voltage label and the voltage necessary according to this manual. Please contact the technical support  personnel of Vantron for any uncertainty about the requirements of the necessary power source.
Use a tested power source. This product still contains a button lithium battery as a real-time clock after its external power source is removed and therefore should not be short-circuited during transportation or placed under high temperatures.
Place cables properly: Do not place cables at any place with extrusion danger.

Cleaning Instructions

• Please power off before cleaning the device.
• Do not use spray detergent.
• Clean with a damp cloth.
• Do not try cleaning exposed electronic components unless with a dust collector.
• Support for special fault: Power off and contact technical support personnel of Vantron in case of the following faults:
  • The device is damaged.
  • The temperature is excessively high.
  • Fault is still not solved after operations according to the manual.

Overview

Introduction

Thank you for choosing Vantron. It is our commitment to provide our valued customers with the embedded devices equipped with the state-of-the-art technology and product
services.
Tablet enables interaction between operators/users and applications and connects industrial control products such as a wireless, transducer, built-in battery, storage, etc. Tablet adopts a display and supports units such as a touch screen, keyboard, audio, sensors, etc. As a digital device for information interaction between humans and machines, the tablet is composed of hardware and software. Based on its ample function interfaces and powerful user operational interfaces, it is very suitable for control units such as medical devices, intelligent transportation, industry, etc.
Vantron’s VT-Tablet products are based on the most advanced ARM and Rockchip processors and have low power consumption and high integration. The products are
designed for applications in industry, medicine, transportation, etc.

Order Information
Table 1-1 is an example of order information.

Table 1-1 Order information

VT-TABLET-5081S| 5VDC Input ,8 ” IPS TFT LCD, RK3368, Quad-core 1.4 GHz, OTG
TYPEC USB, Two SPEAKERS, WIFI a/b/g/n/ac BT5.0,LTE B48,Wireless Charge etc.
---|---

VT-TABLET-5081S Hardware Instructions

Product Appearance
Figure 2-1 and Figure 2-2 show the views of our product.

Specifications

Table 2-1 shows the specifications.

Table 2-1 Specification

Typical 250 cd/m2
TP| Capacity Touch screen, support 5 points,s and double-tap to wake up.
Camera| Front Camera, 5MP, MIPI 2-lanes
Audio| Support 2×3.5mm Stereo headphone Audio Jack, Head Phone (with MIC),1x MIC on board, IC: ALC5640; Support FM, Fre 87-108MHz
I/O /Button| Button| 1xPower button, 2xVolume -/+ button
Recovery| support
USB| 1xUSB Type-C, Support USB 2.0 OTG, Support DC 5V/2A input
4G LTE CAT 6| LTE CAT6. SIM support Micro-SIM(3FF), support B48
RFID| RFID Tag, the chip is Impinj-M4QT, Fre:860-960MHz
NFC| Fre:13.56MHz,chipest is PN7150
WIFI| The WIFI support 2.4GHz/5GHz, 802.11b/g/n/ac. Mode: AP/ Station. Bluetooth support BT 5. 0/BLE.
BT| BLE, BT5. 0.
LED| Status LED| Red\Green bi-color LED, Indicated charging state
RTC| RTC| support by PMIC RK808-B
Sensor| Sensor| Support G-sensor, Gyroscope
Power| Battery| 8000mAh/3.8V. support wireless Charge and USB DC input
OS Certification| OS| Android 7
Regulations certification| FCC
Operation Temp.| -0C ~ +40℃
Storage Temp.| -20C ~ +60℃

Buttons

Power Button
Power off the device and on/off the screen.
Volume buttons
You can use the volume up and down buttons to adjust the volume and use the down button to download the software.

Never apply excessive pressure to a button, or you may cause damage that is not covered under the warranty.

Interface Description

USB OTG (Type C)

With a standard Type C USB 2.0 port, customers can connect the tablet to the host (for example a PC), and manage the tablet as other Android devices. If the tablet is connected through a USB OTG cable, it can work as a host and operate connected devices.

Audio Jack

A headphone can be connected to the tablet through the standard audio jack so that we can better experience music and be free from distractions.

Speakers
2x1w speakers are in the tablet, It can supply comfortable audio for the user.

FM
Support FM function, Frequency 87~108MHz.

Wi-Fi and Bluetooth
The tablet supports 802.11 a/b/g/n/ac Wi-Fi and BLE 5.0 With 2 internal antennas, both Wi-Fi and BLE can achieve better performance.

LTE
The tablet supports LTE B48 with 4 internal antennas and supports Cat 6.

Packing List
Table 2-2 describes the packing information.

Table 2-2 Packing list

Software Instruction

VT-TABLET-5081S has been pre-loaded with an Android image, so the system can run the Android tool to update the system image.

Device instructions

1. Power supply:
   This device only supports 5V DC input. Please use the adapter provided with the DC-Jack.

2. Types USB supports both host and client modes.

3. Enter the download mode method:

1. Hold down the download key (the middle of the three keys) on the board.
2. Plug in the 5V adapter.
3. Plug in the USB cable.
   Once the computer recognizes the USB and goes to download mode, you can release the button and download the software. (Please refer to the software user manual.)

Note: This device is only for customer debugging and it does not support OTA features . These features will be supported in our formal devices.

Tips

Waste Disposal
It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed of according to local regulations on waste disposal. Do not throw batteries into the fire (explosive) or put them in the common waste canister. Products or product packages with the sign of “explosive”  should not be disposed of like household waste but delivered to specialized electrical＆electronic waste recycling/disposal centers.
Proper disposal of this sort of waste helps avoid harm and adverse effect on surroundings and people’s health. Please contact local organizations or recycling/disposal centers for more recycling/disposal methods of related products.
Comply with the following safety tips:

Do not use in combustible and explosive environments Keep away from the combustible and explosive environments for fear of danger.
Keep away from all energized circuits.
Operators should not remove the enclosure from the device. Only the group or person with factory certification is permitted to open the enclosure to adjust and replace the structure and components of the device. Do not change components unless the power cord is removed. In some cases, the device may still have residual voltage even if the power cord is removed. Therefore, it is a must to remove and fully discharge the device before contact so as to avoid injury.
Unauthorized changes to this product or its components are prohibited.
With the aim of avoiding accidents as far as possible, it is not allowed to replace the system or change components unless with permission and certification. Please contact the technical department of Vantron or local branches for help.
Pay attention to caution signs.
Caution signs in this manual remind us of possible danger. Please comply with the relevant safety tips below each sign. Meanwhile, you should strictly conform to all safety tips for the operating environment.
Notice
Considering that reasonable efforts have been made to assure the accuracy of this manual, Vantron assumes no responsibility for possible missing contents and information, errors in contents, citations, examples, and source programs.
Vectron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in form of photocopy,  tape, broadcast, document, etc.

FCC Warning statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information(SAR)

This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government.

The exposure standard employs a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels. The FCC has granted an  Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid.

To ensure that RF exposure levels remain at or below the tested levels, use a belt clip, holster, or similar accessory that has no metallic component in the assembly and must maintain a minimum separation distance of 15mm between your body and the device.

Appendix A: How to Contact Us
If you have any problem or want to know more about our products, visit www.vantrontech.com or contact us.

US Office: Vantron Technology, Inc.
Address: 440 Boulder Court, Suite 300,
Pleasanton, CA 94566, USA
Tel: 925-621-8758
Email: sales@vantrontech.com
China Office: Chengdu Vantron Technology, Ltd
Address: 6th Floor, 1st Building, No.9, 3rd Wu Ke East Street,
Wu Hou District, Chengdu 610045, China
Tel: 86-28-8512-3930/3931, 8515-7572/6320
Email: sales@vantrontech.com.cn

References

• Vantron Technology

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>