peerless-AV PEESF650 Smart Mount Universal Flat Wall Mount Instruction Manual
- July 9, 2024
- Peerless-AV
Table of Contents
peerless-AV PEESF650 Smart Mount Universal Flat Wall Mount
Product Specifications:
- Fits TV sizes: 39 – 75 inches (99 – 191 cm)
- Weight Capacity: 175 lb (79 kg) MAX
Product Usage Instructions
Assembly Tools and Parts:
Tools Needed for Assembly:
- 5/32 (4mm) allen wrench
- 5/16 (8mm) allen wrench
- 3/8 (10mm) allen wrench
Parts List:
Description | Qty |
---|---|
A wall plate | 1 |
Installation Instructions:
Warning and Safety Precautions:
Make sure to follow all safety precautions and warnings mentioned in the
manual.
Stud Wall Installation:
- Verify that the wood studs on the wall are at least 2 x 4 nominal size.
- Use a stud finder to locate and mark the stud center lines.
- Level the wall plate and mark the mounting holes on the stud center lines.
Screws Installation:
To properly tighten screws:
- Tighten until screw head makes contact, then tighten another 1/2 turn. Do not overtighten screws.
Frequently Asked Questions (FAQ):
-
Q: How do I know if my TV will fit this mount?
A: The mount is suitable for TV sizes ranging from 39 to 75 inches (99 – 191 cm). Make sure your TV falls within this range. -
Q: What is the maximum weight capacity of this mount?
A: The maximum weight capacity of the mount is 175 lb (79 kg).
WARNING
This product is designed to be installed on wood stud, solid concrete or
cinder block walls. Hardware is included for wood stud, solid concrete and
cinder block installation. Before installing make sure the supporting surface
will support the combined load of the equipment and hardware. Screws must be
tightly secured. Do not overtighten screws or damage can occur and product may
fail. Never exceed the Maximum Load Capacity. Always use an assistant or
mechanical lifting equipment to safely lift and position equipment. This
product is intended for indoor use only. Use of this product outdoors could
lead to product failure or personal injury. Be careful not to pinch fingers
when operating the mount. For support please call customer care at
1-800-865-2112.
Symbols
WARNING
Do not overtighten screws.
Skip to step.
Display center.
Screws must get at least three full turns and fit snug.
Tools Needed for Assembly
To properly tighten screws: Tighten until screw head makes contact, then tighten another 1/2 turn. Do not overtighten screws.
Parts (Before beginning, make sure you have all parts shown below).
Parts List
Description| Qty| SF650
Part #| PEWS310/BK SF650P
Part #
---|---|---|---
A| wall plate| 1| 201-SG1945| 201-SG1945
B| adaptor bracket| 2| 202-SG1695| 202-SG1696
C| 4mm allen wrench| 1| 560-1146| 560-1146
D| 8mm concrete anchor| 4| 590-0320| 590-0320
E| #14 x 2-1/2″ wood screw| 4| 5S1-015-C03| 5S1-015-C03
F| M4 x 12mm| 4| 520-1079| 504-9013
G| M4 x 25mm| 4| 520-1082| 504-1015
H| M6 x 12mm| 4| 520-1050| 520-1128
I| M6 x 25mm| 4| 520-1211| 520-1208
J| M8 x 12mm| 4| 520-1724| 520-9571
K| M8 x 25mm| 4| 520-1101| 520-1031
L| M4 x 1mm washer| 4| 540-9400| 540-9400
M| M6/M8 x 1.5mm washer| 8| 540-9406| 540-9406
N| 1/4″ (6mm) height spacer| 8| 600-1215| 600-1215
O| M8 x 50mm| 4| 521-1013| 521-1009
WARNING
When installing Peerless wall mounts on a wood stud wall covered with gypsum
board (drywall), verify that the wood studs are a minimum of 2″ x 4″ nominal
size. Do not install over gypsum board thicker than 5/8″.
Use stud finder to locate and mark stud center lines.
Level wallplate. Mark mounting holes on stud center lines.
Drill mounting holes into supporting surface (2.5″ (64mm) minimum depth required).
Mounting hole must center on stud.
Level wallplate. Install using wood screws provided.
Maximum 80 in. • lb (9 N.M.).
WARNING
When installing Peerless wall mounts on a concrete wall, the wall must be at
least 8″ thick with a minimum compressive strength of 2000 psi. When
installing Peerless wall mounts on a cinder block wall, the cinder blocks must
meet ASTM C-90 specifications and have a minimum nominal width of 8″. Do not
drill into mortar joints! Be sure to mount in a solid part of the block,
generally 1″ (25 mm) minimum from the side of the block. It is suggested that
a standard electric drill on slow setting is used to drill the hole instead of
a hammer drill to avoid breaking out the back of the hole when entering a void
or cavity. Never attach concrete expansion anchors to concrete or cinder block
covered with plaster, drywall or other finishing material.
Level wallplate. Mark mounting holes.
Drill mounting holes into supporting surface (2.5″ (64mm) minimum depth required).
Do not drill into mortar joints.
Insert anchor flush to concrete.
Level wallplate. Install using concrete anchors and wood screws provided.
Maximum 80 in. • lb (9 N.M.).
Center adaptor brackets vertically on back of screen.
Height adjustment: Tighten or loosen.
LIMITED FIVE-YEAR WARRANTY
Peerless Industries, Inc. (“Peerless”) warrants to original end-users of
Peerless® products will be free from defects in material and workmanship,
under normal use, for a period of five years from the date of purchase by the
original end-user (but in no case longer than six years after the date of the
product’s manufacture). At its option, Peerless will repair or replace, or
refund the purchase price of, any product which fails to conform with this
warranty.
In no event shall the duration of any implied warranty of merchantability or
fitness for a particular purpose be longer than the period of the applicable
express warranty set forth above. Some states do not allow limitations on how
long a implied warranty lasts, so the above limitation may not apply to you.
This warranty does not cover damage caused by
- service or repairs by the customer or a person who is not authorized for such service or repairs by Peerless,
- the failure to utilize proper packing when returning the product,
- incorrect installation or the failure to follow Peerless’ instructions or warnings when installing, using or storing the product, or
- misuse or accident, in transit or otherwise, including in cases of third party actions and force majeure.
In no event shall Peerless be liable for incidental or consequential damages
or damages arising from the theft of any product, whether or not secured by a
security device which may be included with the Peerless® product. Some states
do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
This warranty is in lieu of all other warranties, expressed or implied, and is
the sole remedy with respect to product defects. No dealer, distributor,
installer or other person is authorized to modify or extend this Limited
Warranty or impose any obligation on Peerless in connection with the sale of
any Peerless® product.
This warranty gives specific legal rights, and you may also have other rights
which vary from state to state.
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Email: tech@peerlessmounts.com
Ph: 800-865-2112
Fax: 800-359-6500
www.peerless-av.com
© 2016, Peerless Industries, Inc.
Peerless-AV Europe
Unit 3 Watford Interchange, Colonial Way, Watford, Herts, WD24 4WP, United
Kingdom Customer Care
44 (0) 1923 200 100
www.peerless-av.com
© 2016, Peerless Industries, Inc.
Peerless-AV de Mexico
Ave de las Industrias 413 Parque Industrial Escobedo Escobedo N.L Mexico 66050
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2016, Peerless Industries, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>