peerless-AV ACCD-REM02 Outdoor Rated Learning Remote User Guide

: June 6, 2024
: Peerless-AV

Table of Contents

GENERAL SAFETY PRECAUTIONS
Parts List
Universal Remote Control Button Guide
Battery Installation and Replacement
Controlling Devices and Programming using IR Learning
Warrant
Read User Manual Online (PDF format)
Download This Manual (PDF format)

peerless-AV ACCD-REM02 Outdoor Rated Learning Remote User Guide

The Peerless-AV® Waterproof Universal Remote Control with IR learning is designed to operate all Peerless-AV outdoor displays and outdoor soundbars as well as third-party satellite/cable boxes, Blu-ray/DVD Players, VCR’s and miscellaneous audio/video/automation equipment.

GENERAL SAFETY PRECAUTIONS

Read before operating equipment
Thank you for purchasing our product. Before using it, please read this user guide carefully and follow the instructions for safe operation. Please keep this manual for future reference and always include it when transferring or transporting this product to a different location.

WARNING
In case of emergency such as fire or electric shock caused by the product, immediately contact 911 or proper emergency police/fire service agencies in your country.
To reduce the risk of electric shock or fire, heed the following:

Do NOT disassemble, modify or service product in any way other than that contained in this instruction. Any unauthorized modifications made to the product automatically void product warranty.
Do NOT submerge in water.
Do NOT destroy, process, or place close to any heat source.
Do NOT operate the product if it has been dropped or struck. Severe physical impact to the product may cause components to fall out of place within and break.

Parts List

(1) A universal remote control (batteries included) 410-0332

A (1)
universal remote control

Universal Remote Control Button Guide

ON – Discrete Power On
OFF – Discrete Power OFF
POWER – Toggles TV power / universal control
TV – Press to control TV
SPK – Press to control Peerless-AV Soundbar (SPK-080)
AUX1 – Learning function – map codes to buttons
AUX2 – Learning function – map codes to buttons
#0 ~ #9 – Channel navigation functions
● – Channel navigation functions
LAST – MENU BACK/ Press to return to previous channel
ARROWS – Press to navigate through menus and settings
OK – Press to select items in the menu or guide
VOL +/- – Press to increase or decrease volume
CH +/- – Press to change the channel up or down
MUTE – Toggles Audio On and Off
MENU – Press to access the On-Screen Display Menu
INPUT – Toggles through the available source inputs
INFO – Press to display content information
EXIT – Press to exit the on-screen display menu
PREVIOUS – Press to skip content backwards
REW – Press to rewind content backwards
FF – Press to fast forward contend ahead
NEXT – Press to skip content ahead
REC – Press to record content
PLAY/PAUSE – Toggles content play and pause
STOP – Press to stop content play
GUIDE – Press to access guide information

Press “SPK” button to control the soundbar.

POWER – Toggles Power On and Off
– Discrete Power On and Off
1 – Discrete Auxiliary input command
2 – Discrete Bluetooth® input command
UP ARROW – Press to increase bass
DOWN ARROW – Press to decrease bass
LEFT ARROW – Press to decrease treble
RIGHT ARROW – Press to increase treble
MUTE – Toggles Audio On and Off
VOL + – Press to increase volume
VOL – – Press to decrease volume

Battery Installation and Replacement

The remote control is powered by two 1.5V AAA batteries installed at the factory.

If the Red LED light on the remote fails to illuminate when a button is pressed, the batteries may need to be replaced. Follow the directions below to replace the batteries.

Battery Installation

To remove the battery module of the remote control, remove the two screws on the end of the battery module. Slide the battery module out of the remote control.
Insert two new “AAA” size batteries into the battery module. Ensure the positive and negative marks on the batteries are correctly oriented with the markings on the inside of the remove control’s battery compartment.
Slide the battery module back into the remote control and reinsert the two screws in the end of the battery module to maintain a waterproof seal (do not over tighten).

CAUTION
Incorrect usage of batteries can result in leaks or bursting. Peerless-AV recommends the following battery use:

Do not mix battery brands.
Do not combine new and old batteries. This can shorten the battery life or cause battery acid leaks.
Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.
Do not touch exposed battery acid as it may injure skin.
Remove the batteries if you do not intend to use the remote control for a long period of time.
Do not expose the batteries to excessive heat from sunlight, fire or other heat sources or batteries could explode.
Fully tighten screws to maintain the ingress protection rating of the remote.

Controlling Devices and Programming using IR Learning

To Control Device:

Press and release the desired device button [TV, SPK, AUX1, AUX2]. The button of the selected device will blink twice. After that, all buttons will operate with the selected device’s [TV, SPK, AUX1, AUX2] code.
The selected device’s button illuminates when usable keys are pressed.
Unusable keys will blink twice quickly and turn off.

To Program Using the IR Learning:

Press and hold the [AUX1, AUX2] button and the [OK] button for 3 seconds then release. All source buttons will illuminate briefly and then will only highlight the AUX1 or AUX2, depending on which chosen.
While the button of the selected device blinks slowly (timeout: 60 seconds), press the button you want to program on your Peerless-AV remote. The button will be programmable for 30 seconds.
On your devices original remote, press the button you want to assign to your Peerless-AV remote (maximum 5cm between remotes).
If successful, the device button [AUX1, AUX2] will blink 3 times slowly.
If unsuccessful, the device button [AUX1, AUX2] will blink 3 times quickly and automatically retries learning.
To program additional buttons, repeat from step 2.
Press the selected device button [AUX1, AUX2] to finish Learning mode. The device button will blink 3 times.