PORT 901954 Charging Tower Range User Guide

June 1, 2024
PORT

PORT 901954 Charging Tower Range

INSTRUCTIONS

  1. Plug the power cable to the AC socket.
  2. Turn on the charging tower by pressing the ON/OFF switch.
  3. Connect your USB charging cable to the charging tower and then to your device.
  4. Store your device in the dedicated compartment.

SETTING THE CODE (Figure 1)

  1. The default code is 0-0-0-0
  2. Turn the knob to the «OPEN» position.
  3. Push the pin into position «B».
  4. Scroll through the digits to set the new code
  5. Push the pin back into position «A».

PORT-901954-Charging-Tower-Range-2

Tip

  • Make sure you can lock/unlock with the new code before locking an object.
  • Keep the code and Master key in a safe place for future reference.

REMOVING THE CODE (Figure 2)

  1. Use the master key to open the lock
  2. Press each pusher and scroll through the corresponding number until it stops. The last 4 digits displayed are the code

PORT-901954-Charging-Tower-Range-3

WARNING

  • Keep away from water, fire, liquids and out of the reach of children.
  • Avoid exposing the product to prolonged periods of extreme heat or cold.
  • Qualified personnel must replace the product to avoid a hazard.
  • Do not dismantle or attempt to repair this product yourself.

TROUBLESHOOTING

  • If the unit appears to have failed in functioning, please check the following:
  • The charging tower is plugged to a powerd socket.
  • The USB cable is correctly plugged to one of the USB port.

PRODUCT REGISTRATION
PORT EUROPE recommends that you register your product shortly after its purchase on the website http://www.port-connect.com

TECHNICAL SUPPORT
For technical questions regarding your product, please go to the contact/-support section on the website http://www.port-connect.com

EUROPEAN DIRECTIVE 2012/19/EU
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal household waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The symbol of the crossed out dustbin is marked on all products to remind the obligations of separate collection.
Consumers should contact their local authority or retailer for information concerning the correct disposal of their product

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals