BEZO Bluetooth Audio Receiver Adapter User Manual

BEZO Bluetooth Audio Receiver Adapter

Introduction

The BEZO Bluetooth Audio Receiver Adapter is a versatile and compact device that allows you to upgrade your non-Bluetooth audio devices, such as wired headphones or speakers, to wirelessly stream music or audio from your Bluetooth-enabled devices like smartphones, tablets, or laptops. This comprehensive guide will provide you with essential information about the adapter, including specifications, what’s included in the package, key features, how to use it, safety guidelines, maintenance tips, and troubleshooting techniques.

Specifications

• Bluetooth Version: Bluetooth 5.0
• Supported Bluetooth Profiles: A2DP, AVRCP
• Operating Range: Up to 33 feet (10 meters)
• Battery Life: Up to 8 hours of continuous playback
• Charging Port: Micro USB
• Charging Time: Approximately 2 hours
• Audio Output: 3.5mm audio jack
• Audio Quality: High-quality stereo sound
• Dimensions: Compact and portable design

What’s in the Box

• 1 x BEZO Bluetooth Audio Receiver Adapter
• 1 x 3.5mm Audio Cable
• 1 x Micro USB Charging Cable
• 1 x User Manual

Key Features

• Bluetooth 5.0: Enjoy stable and fast Bluetooth connectivity for seamless audio streaming.
• Universal Compatibility: The adapter works with a wide range of non-Bluetooth audio devices, including headphones, speakers, and car stereos.
• Long Battery Life: With up to 8 hours of playback on a single charge, you can enjoy your music throughout the day.
• Hands-Free Calling: The built-in microphone allows you to answer calls hands-free when connected to your smartphone.
• Auto Reconnect: The adapter automatically reconnects to your paired device when in range, ensuring convenience.

Bluetooth

Bluetooth Technology upgrade

Built in Bluetooth 5.0 dual system, can receive and transmit Bluetooth signal

NFC Bluetooth connectivity
Built in NFC chip, you can directly touch the receiver with NFC mobile phone for connection

How to Use

• Power On/Off: Press and hold the power button on the adapter to turn it on or off. The LED indicator will flash to indicate the power status.
• Pairing: Put the adapter into pairing mode by holding the power button for a few seconds until the LED indicator flashes rapidly. On your Bluetooth-enabled device, search for available Bluetooth devices and select “BEZO” to pair.
• Audio Output: Connect the adapter to your non-Bluetooth headphones or speakers using the included 3.5mm audio cable.
• Hands-Free Calling: When a call comes in while connected to your smartphone, press the power button to answer the call. You can also end calls using the same button.
• Charging: Use the provided Micro USB cable to charge the adapter. The LED indicator will change color to indicate charging status.

Double device connection

Safety Guidelines

• Read the User Manual: Start by thoroughly reading and understanding the user manual provided by the manufacturer. The manual will provide you with essential safety information, operating instructions, and maintenance guidelines.
• Power Source: Ensure that you connect the BEZO Bluetooth Audio Receiver Adapter to a compatible and properly rated power source or USB port. Using an incorrect voltage or current can damage the device or pose a safety risk.
• Heat Ventilation: Place the adapter in a well-ventilated area and avoid covering or obstructing its ventilation openings. Overheating can lead to malfunctions or even fire hazards. Avoid placing it on flammable surfaces.
• Placement: Position the Bluetooth adapter on a stable surface to prevent it from falling or being damaged. Keep it away from edges and potential hazards.
• Environmental Conditions: Avoid exposing the adapter to extreme temperatures, humidity, or direct sunlight. Operating it within the recommended temperature and humidity ranges will ensure its longevity.
• Cable Management: Securely fasten any connected cables and cords to prevent tripping hazards and avoid strain on the adapter or its connections.
• Water and Liquids: Keep the adapter away from water, moisture, and liquids. Spills or exposure to liquids can damage the internal components and pose electrical safety risks.
• Cleaning: If cleaning is necessary, unplug the adapter from the power source and use a soft, dry cloth. Do not use liquid cleaners or immerse the device in water.
• USB Ports: Avoid forcing the adapter into a USB port. It should fit easily and securely. Forcing it can damage the adapter or the USB port.
• Children and Pets: Keep the adapter and its cords out of the reach of children and pets. Small parts and cables can be a choking hazard, and pets may chew on cords.
• Electrical Outlet Safety: If you are using a USB adapter with a power adapter, ensure that it is plugged into a properly rated and grounded electrical outlet. Use surge protectors if necessary to safeguard against power surges.
• Firmware and Software Updates: Periodically check for firmware or software updates provided by the manufacturer to ensure that your device operates safely and efficiently.
• Secure Pairing: When pairing the Bluetooth adapter with devices, be cautious of connecting to unfamiliar or unauthorized devices to prevent security risks.
• Emergency Procedures: Familiarize yourself with emergency procedures, such as safely disconnecting the adapter in case of malfunctions or unusual behavior.
• Warranty and Support: Register your product and be aware of the warranty terms provided by the manufacturer. If you encounter any issues or problems with the device, contact the manufacturer’s customer support for assistance.

10m Distance Transmission
Built in current sound isolation module to eliminate the sound of the speaker

Maintenance

• Clean the Exterior: Periodically clean the exterior of the adapter using a soft, dry, lint-free cloth. This will help remove dust, dirt, and fingerprints.
• Check for Cable Damage: Inspect the audio cables and connectors for any signs of wear, fraying, or damage. Damaged cables can lead to audio issues. Replace any damaged cables as needed.
• Keep it Dry: Ensure that the adapter remains dry at all times. Do not expose it to moisture, spills, or liquids, as this can damage the internal components and pose electrical hazards.
• Secure Connections: Verify that the audio cables are securely connected to both the adapter and your audio source (e.g., a stereo system, headphones, or speakers). Loose connections can result in audio interruptions.
• Firmware Updates: Check for firmware updates provided by the manufacturer. Updating the firmware can improve performance and compatibility with various devices.
• Storage: When not in use, store the adapter in a cool, dry place. Consider using the original packaging or a protective case to prevent dust and damage.
• Check for Overheating: During extended use, touch the adapter to ensure it does not become excessively hot. Overheating can affect performance and may indicate a problem. If it gets too hot, allow it to cool down before using it again.
• Remove Obstructions: Ensure that the adapter is placed in an open area without obstructions that could block the Bluetooth signal. Walls and other objects can weaken the signal strength.
• Avoid Extreme Temperatures: Do not expose the adapter to extreme temperatures. Operating it within the recommended temperature range specified by the manufacturer will prolong its lifespan.
• Use with Care: Be gentle when handling the adapter, especially when plugging or unplugging it from devices. Avoid excessive bending or twisting of the connectors and cables.
• Regular Testing: Periodically test the adapter’s performance by connecting it to different audio sources and devices. Ensure that it can connect and stream audio reliably.
• Inspect Indicator Lights: Pay attention to any LED indicator lights on the adapter. If there are abnormal blinking patterns or no lights at all, consult the user manual for troubleshooting guidance.
• Reset if Necessary:  If you encounter connectivity or performance issues, try resetting the adapter to its default settings. Refer to the user manual for reset instructions

Battery

• Do not contain batteries
• Power on to start automatic connection

Troubleshooting

Problem 1: The Bluetooth Adapter Doesn’t Connect to My Device

• Solution:

1. Ensure that the BEZO adapter is in pairing mode. You can typically put it into pairing mode by holding down the pairing button until the LED indicator flashes rapidly.
2. Make sure your Bluetooth-enabled device (e.g., smartphone, tablet, or computer) is also in pairing mode and within range of the adapter.
3. Check if there are other Bluetooth devices nearby that might be interfering with the connection. If so, move them away or turn them off.
4. Make sure you are not trying to pair the BEZO adapter with a device that is already connected to another Bluetooth device. Disconnect the previous connection if needed.

Problem 2: Audio Quality is Poor or There are Audio Dropouts

• Solution:

1. Check for obstructions or interference between the BEZO adapter and your Bluetooth device. Walls, electronic devices, and other obstacles can weaken the Bluetooth signal.
2. Ensure that the BEZO adapter is placed in an open and unobstructed location for better signal reception.
3. Try repositioning the Bluetooth adapter and your device to reduce interference and improve signal strength.
4. Ensure that both the BEZO adapter and your Bluetooth device have sufficient battery power.
5. If you’re experiencing audio dropouts, consider moving your Bluetooth device closer to the BEZO adapter to improve signal stability.

Problem 3: The Adapter Doesn’t Turn On or Has No Power

• Solution:

1. Check if the BEZO adapter has a sufficient charge by plugging it into a USB power source for charging. Ensure that the charging cable and power source are functioning properly.
2. If the BEZO adapter still doesn’t turn on, try resetting it. You can typically reset it by holding down the power button for a few seconds.
3. Make sure the power button isn’t stuck or obstructed, preventing it from functioning properly.

Problem 4: The Adapter Can’t Be Found by Other Devices

• Solution:

1. Confirm that the BEZO adapter is in pairing mode (typically indicated by a rapidly flashing LED).
2. Check if the Bluetooth devices you’re trying to connect to are compatible with the BEZO adapter and support the same Bluetooth profiles (e.g., A2DP, AVRCP).
3. Make sure the Bluetooth devices you’re trying to connect to have Bluetooth enabled and are actively searching for nearby devices.

Problem 5: Audio is Noisy or Distorted

• Solution:

1. Ensure that the BEZO adapter is properly connected to your audio source. Check the audio cables and connections for any loose or damaged components.
2. Try using different audio cables to rule out cable issues.
3. Verify that the volume levels on both the BEZO adapter and your connected audio source are at an appropriate level to prevent distortion.

FAQs

1. What is the Bezo Bluetooth Audio Receiver Adapter?

The Bezo Bluetooth Audio Receiver Adapter is a compact device that allows you to wirelessly connect your Bluetooth-enabled devices to non-Bluetooth audio systems, like car stereos or home theater setups.

2. Is the Bezo Bluetooth Audio Receiver Adapter compatible with all Bluetooth devices?

Yes, it is designed to work with a wide range of Bluetooth-enabled devices, including smartphones, tablets, and laptops.

3. How do I pair my devices with the Bezo Bluetooth Adapter?

Simply put the adapter in pairing mode, search for it on your Bluetooth device, and connect. The specific pairing process may vary depending on your device's operating system.

4. What is the range of the Bezo Bluetooth Adapter?

The Bezo Bluetooth Adapter typically has a range of about 33 feet (10 meters), but the actual range may vary depending on the environment and interference.

5. Can I use the Bezo Bluetooth Adapter while charging?

Yes, you can use the adapter while it's charging, so you don't have to worry about running out of battery during use.

6. Does it support multiple device connections?

Some models of the Bezo Bluetooth Adapter support multiple device connections, but it's best to check the product specifications to confirm.

7. How is the audio quality when using the Bezo Bluetooth Adapter?

The audio quality is generally good, but it can vary depending on the audio source, the quality of your audio system, and the Bluetooth codec used by your devices.

8. Can I control the volume through the Bezo Bluetooth Adapter?

The ability to control the volume through the adapter may depend on your audio system and the specific model of the adapter. Some models have volume control features.

9. Does the Bezo Bluetooth Adapter have a built-in microphone for hands-free calling?

Some models come with a built-in microphone for hands-free calling, but not all. Check the product description for this feature.

10. Is the Bezo Bluetooth Adapter easy to install and set up?

Yes, it is typically easy to install and set up. Most users can get it up and running in a few minutes.

11. Does the Bezo Bluetooth Adapter come with a warranty?

The warranty may vary depending on the model and retailer, so be sure to check the product details for warranty information.

12. How do I update the firmware of the Bezo Bluetooth Adapter?

Firmware updates, if available, can usually be done by connecting the adapter to a computer and following the provided instructions. Check the manufacturer's website for updates.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>