ViewSonic IFP52-2 Series ViewBoard 75 Inch 4K Interactive Display User Manual
- July 4, 2024
- Viewsonic
Table of Contents
ViewSonic IFP52-2 Series ViewBoard 75 Inch 4K Interactive Display
Specifications
- Model: IFP52-2 Series (VS19364/VS19365/VS19366)
- Aspect Ratio: OK
- Mounting: M8 x 25 mm x 4
- Dimensions: 11.875 inches (30.16 cm) x 4 inches (10 cm) x 4 inches (10 cm)
- Compatible with: ViewSonic OPS PC modules VPC2C_25_27-O and VPC2C_25_27-O-1B
- VESA Mounting Pattern: IFP6552-2 (500 x 400 mm), IFP7552-2 (600 x 400 mm), IFP8652-2 (800 x 600 mm)
Product Usage Instructions
- Ensure the device is powered off before proceeding with installation or setup.
- Mount the IFP52-2 Series ViewBoard on a compatible VESA mounting pattern using the provided M8 screws.
- Connect the ViewBoard to power using the AC IN port.
- If using a WiFi connection, configure the WiFi module ZZ according to your network settings.
- If integrating an OPS PC module, follow the manufacturer’s instructions for installation and setup.
FAQ
Frequently Asked Questions
- Q: How do I access online support for my ViewSonic product?
- A: Visit the ViewSonic Support Center at www.viewsonic.com for assistance.
- Q: What are the dimensions of the IFP52-2 Series ViewBoard?
- A: The dimensions are 11.875 inches (30.16 cm) in width, 4 inches (10 cm) in height, and 4 inches (10 cm) in depth.
- Q: Can I mount the ViewBoard on any VESA-compatible mount?
- A: Yes, the ViewBoard is compatible with VESA mounting patterns as specified in the user manual.
What In The Box
Installation And Dimensions
| IFP6552-2 | 500 x 400 mm (A x B) |
|---|---|
| IFP7552-2 | 600 x 400 mm (A x B) |
| IFP8652-2 | 800 x 600 mm (A x B) |
Power
Contact
ViewSonic Europe Limited
- Haaksbergweg 75 1101 BR Amsterdam Netherlands
- +31 (0) 650608655
- EPREL@viewsoniceurope.com
- https://www.viewsonic.com/eu/
Scan
Copyright © 2024 ViewSonic Corporation. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>