H TRONIC H-RCL200 Water Sensor Instruction Manual

: June 2, 2024
: H-TRONIC

Table of Contents

H TRONIC H-RCL200 Water Sensor
Technical specifications
MOUNTING THE SENSOR
INFORMATION ABOUT ENVIRONMENTAL PROTECTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

H TRONIC H-RCL200 Water Sensor

The water sensor is suitable for combination with H-TRONIC Water Level Switch WPS 1000 (item No. 1 144 20) for automatically controlling the level of conductive liquids in containers, wells, cellar rooms, etc. The metal sensors are encapsulated in a plastic housing. This measuring sensor with a 10 m PVC connexion cable is exclusively suitable for detecting liquids in nonaggressive media.

Technical specifications

Layout: sensor encapsulated in plastic (for conductive liquids)
Connexion: approx. 10 m PVC cable with 2.5 mm phone jack

MOUNTING THE SENSOR

Mount the sensor to the spot that you wish to be controlled. Plug the phone jack of the water sensor part into the jack of the front side of the device. The sensor is triggered by contact between the two metal contacts and water (sensor circuit closed). The height of the spot at which the sensor is mounted determines the time of reaction of the sensor. A large number of external sensors can be connected to the sensor inlet of your WPS 1000 device, e.g., float switches, level switches, magnetic contacts, alarm shut-off mats, etc. Important! The connection cable of your water sensor or the sensors need to be installed firmly to avoid tripping hazards. hazard. As a basic principle, the water sensor is only put into operation corresponding to the user’s manual enclosed to the device (water level switch).

INFORMATION ABOUT ENVIRONMENTAL PROTECTION

This product must not be disposed of with normal household garbage at the end of its service life; it must be carried to a recycling collection point that accepts electric and electronic devices.
Note: This document is a translation of the German original. The present user’s manual has been published by H-TRONIC GmbH, Industriegebiet Dienhof 1, D-92242 Hirschau, Germany. It corresponds to the technical state of the time of publication and is to be considered as part of the device. All rights, errors, and modifications that might be made to or that might have occurred on the technology, configuration, or design basis are reserved. Any reproduction requires the publishers’ explicit written permission. Copyright 2012 by H-TRONIC GmbH.