TRONIC TNMC 7.5A1 Wireless Charging Pad Instruction Manual
- June 4, 2024
- TRONIC
Table of Contents
- MAGNETIC WIRELESS CHARGING PAD
- Introduction
- Intended use
- Trademark notices
- **** Safety notes
- Description of parts
- Technical data
- Scope of delivery
- Before use
- Operation
- Troubleshooting
- Storage when not in use
- Cleaning
- Disposal
- Simplified EU declaration of conformity
- Warranty and service
- Documents / Resources
TNMC 7.5A1 Wireless Charging Pad
Instruction Manual
IAN 398123_2107
MAGNETIC WIRELESS CHARGING PAD
Operation and Safety Notes
Introduction
We congratulate you on the purchase of your new product.
You have chosen a high-quality product. The instructions for use are part of
the product. They contain important information concerning safety, use, and
disposal. Before using the product, please familiarise yourself with all of
the safety information and instructions for use. Only use the product as
described
and for the specified applications. If you pass the product on to anyone else,
please ensure that you also pass on all the documentation with it.
Intended use
The MAGNETIC WIRELESS CHARGING PAD (hereinafter referred to as the „Product“)
is an information electronics device. This product is only for charging mobile
devices that use wireless technology. Other devices cannot be charged with the
product. The product is intended for private use only
and not for commercial use. The manufacturer accepts no liability for damage
resulting from unauthorized modifications or improper use.
Trademark notices
- USB ® is a registered trademark of USB Implementers Forum, Inc.
- The TRONIC trademark and trade name is the property of their respective owners.
- Any other names and products are trademarks or registered trademarks of their respective owners.
**** Safety notes
Before using the product, please familiarize yourself with all of the safety
instructions and instructions for use! When passing this product on to others,
please also include all the documents!
WARNING! DANGER TO LIFE AND RISK OF ACCIDENT FOR INFANTS AND CHILDREN!
DANGER! RISK OF SUFFOCATION! Never leave children unsupervised with the
packaging material. The packaging material poses a suffocation hazard.
Children frequently underestimate the dangers. The packaging material is not a
toy.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision. The product is not a toy.
ATTENTION! Damage to property
- Check the product before every use! Discontinue use if any damage to the product or the connection cable is detected! This product does not contain any parts which can be serviced by the user.
- Keep the product away from moisture, dripping, and splash water!
- Do not place burning candles or other open fire on or next to the product.
- If you notice smoke or unusual noise or odor, immediately disconnect the USB connection.
- Sudden temperature changes may cause condensation inside the product. In this case, allow the product to acclimate for some time before using it again to prevent short circuits!
- Do not operate the product near heat sources, e.g. radiators or other devices emitting heat!
- Do not throw the product into the fire and do not expose to high temperatures.
- Never open the product. It has no internal parts requiring maintenance.
- The product must not be covered during operation, no foreign objects may be introduced into the product, and no foreign objects may lie on the charging surface during operation.
- The product must not be charged at a PC or notebook due to the high power consumption.
ATTENTION! Radio interference
- Do not use the product on airplanes, in hospitals, service rooms, or near medical electronic systems. The wireless signals transmitted could impact the functionality of sensitive electronics.
- Keep the product at least 20 cm from pacemakers or implantable cardioverter defibrillators, as electromagnetic radiation may impair the functionality of pacemakers.
- The radio waves transmitted could cause interference in hearing aids.
- Never use the product near flammable gases or potentially explosives areas (e.g. paint shops), as the radio waves emitted can cause explosions and fire.
- The OEM GmbH & Co KG is not responsible for interference with radios or televisions due to unauthorized modification of the product. The OEM GmbH & Co KGfurther assumes no liability for using or replacing cables and products not distributed by OWIM.
- The user of the product is solely responsible for rectifying malfunctions caused by unauthorized changes to the product and the replacement of such modified products.
Description of parts
Please refer to the fold-out page.
- USB type C plug
- Charging surface
- USB charging cable
- Instructions for use
- Folding Stand
Technical data
Dimensions (W x H): | approx. 65 x 7.5 mm |
---|---|
Weight: | approx. 48 g |
Operating temperature: | 5 – 35 °C |
Storage temperature: | 0 – 45 °C |
Humidity(no condensation): | 10 – 70 % |
USB charging cable length: | approx. 1 m |
Input: | 5 V ****, 2.4 A |
Output: | 5 W max. |
--- | --- |
Input: | 9 V ****, 2.22 A |
Output: | 7.5 W max. |
Total power: | 7.5 W max.* |
Frequency band: | 110.2-148.8 kHz |
Transmitted maximum radio frequency power (H-field): | -19.52 dBuA/m at |
10m distance
Maximum distance between charging area and mobile device:| ≤ 5 mm
- NOTE: To achieve the maximum output power of 7.5 W, you must use a USB adapter with an output voltage of 9 V and an output current of at least 2.22 A. Such a USB adapter is not included in the delivery.
The specification and design may be changed without notification.
Scope of delivery
1 Magnetic wireless charging pad
1 Instruction for use
Before use
NOTE:
- Before use, verify the package contents are complete and undamaged!
- All parts have to be unpacked and the packaging material has to be removed completely.
- If you notice any damage or missing parts, contact the dealer who sold this product.
Operation
ATTENTION! The product must not be charged at a PC or notebook due to the
high power consumption.
Charge your mobile device
- Plug the USB type C plug 1 of the USB charging cable 3 into the USB port on a suitable USB adapter (not included).
- Plug the USB adapter (not included) into an easily accessible mains socket.
- Place the mobile device on the charging surface 2. Make sure the center of the device is aligned with the center of the charging surface (Fig A). Charging will begin on contact. Protective covers that protect the mobile device may interfere with the charging process. In this case, the mobile device must be removed from the protective cover.
- Put out the folding stand 5 at the back of the product to support the device stand on the stable and horizontal surface (Fig A).
- NOTE : The charging power is up to 7.5 W, depending on the power adapter used.
Troubleshooting
What should I do if the mobile device does not get charged?
- Check that the mobile device has wireless charging technology.
- Check the mobile device is placed horizontally in the center position of the charging pad.
- Check that no foreign object blocking the charging.
- Check whether the mobile device is removed from the protective cover.
Storage when not in use
Store the product in a dry interior, away from direct sunlight, preferably in its original packaging.
Cleaning
-
This product has no internal parts requiring maintenance.
Moisture entering the product may result in damage. -
Ensure no moisture enters the product during cleaning to prevent damaging the product beyond repair.
-
Do not use abrasive, solvent-based, or aggressive cleaners.
These can damage the surface of the product. -
Only clean the product with a slightly damp cloth and mild washing-up liquid.
Disposal
Packaging:
The packaging is made of environmentally friendly materials, which may be
disposed of through your local recycling facilities.
Observe the marking of the packaging materials for waste separation, which are
marked with abbreviations (a) and numbers (b) with the following meaning: 1–7:
plastics / 20–22: paper and fibreboard / 80–98: composite materials.
Product:
Contact your municipality for information on how to dispose of your worn-out
product.
****The adjacent symbol of a crossed-out dustbin on wheels indicates this
product is subject to Directive 2012/19/EU. This directive states at the end
of the life this product must not be disposed of through regular household
refuse but must be returned to special collection sites, recycling depots, or
waste management companies.
This disposal is free of charge to you.
Protect the environment and dispose of it properly.
The product is recyclable, subject to extended manufacturer responsibility,
collected separately, and can be obtained from your local authority.
Simplified EU declaration of conformity
Hereby, OWIM GmbH & Co. KG, Stiftsbergstraße 1, 74167 Neckarsulm, GERMANY,
declares that the product MAGNETIC WIRELESS CHARGING PAD HG09055A, HG09055B,
is in compliance with Directives 2014/53/EU and 2011/65/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.owim.com
Warranty and service
Warranty
The product has been manufactured to strict quality guidelines and
meticulously examined before delivery. In the event of product defects, you
have legal rights against the retailer of this product. Your legal rights are
not limited in any way by our warranty detailed below.
The warranty for this product is 3 years from the date of purchase. The
warranty period begins on the date of purchase.
Please keep the original sales receipt in a safe location. This document is
required as your proof of purchase.
Should this product show any fault in materials or manufacture within 3 years
from the date of purchase, we will repair or replace it – at our choice – free
of charge to you. This warranty becomes void if the product has been damaged,
used, or maintained improperly.
The warranty applies to defects in material or manufacture.
This warranty does not cover product parts subject to normal wear, thus
possibly considered consumables (e.g. batteries)
or for damage to fragile parts, e.g. switches, rechargeable batteries, or
glass parts.
arranty claim procedure
To ensure quick processing of your case, please observe the following
instructions:
Please have the till receipt and the item number (IAN 398123_2107) available
as proof of purchase.
You will find the item number on the rating plate, an engraving, on the front
page of the instructions for use (bottom left), or as a sticker on the rear or
bottom of the product.
If functional or other defects occur, please contact the service department
listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address
that will be provided to you. Ensure that you enclose the proof of purchase
(till receipt) and information about what the defect is and when it occurred.
Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
www.lidl-service.com
OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model No.: HG09055A, HG09055B
Version: 02/2022
Documents / Resources
|
TRONIC TNMC 7.5A1 Wireless Charging
Pad
[pdf] Instruction Manual
TNMC 7.5A1, Wireless Charging Pad, Charging Pad, Wireless Pad, TNMC 7.5A1, Pad
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>