TRONIC TPB 5000 A1 Slim Power Bank Instruction Manual

TRONIC TPB 5000 A1 Slim Power Bank

Introduction

Information about these operating instructions
Congratulations on the purchase of your new device. You have selected a high- quality product. The operating in-structions are part of this product. They contain important information on safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the range of applications specified. Retain these operating instructions for future reference. Please also pass on these operating instructions to any future owner.

Copyright

This documentation is protected by copyright. Any copying or reproduction, including in the form of extracts, or any reproduction of images (even in a modified state), is permitted only with the written authorization of the manufacturer.

Notes on trademarks

USB® is a registered trademark of USB Implementers Forum, Inc. All other names and products may be trademarks or registered trademarks of their respective owner.

Intended use

This device is an information technology device and is intended exclusively for charging mobile devices which are charged via a USB port as standard. The device is not intended for any other purpose, nor for use beyond the scope described. The device is not intended for use in commercial or industrial environments. The manufacturer accepts no responsibility for damage caused by failure to observe these instructions, improper use or repairs, unauthorised modifications or the use of unapproved replacement parts. The risk is borne solely by the user.

Warnings and symbols used

The following warnings are used in these operating instructions:

DANGER

A warning at this hazard level indicates a hazardous situation.
Failure to avoid this hazardous situation will result in serious injuries or death. Follow the instructions on this warning label to avoid the risk of death or serious injuries.
A warning at this hazard level indicates a potentially hazardous situation.
Failure to avoid this hazardous situation could result in serious injuries or death. Follow the instructions on this warning label to avoid the risk of death or serious injuries.

A warning at this hazard level indicates a potentially hazardous situation.
Failure to avoid this hazardous situation could result in injuries. Follow the instructions on this warning label to prevent injuries.

A warning at this hazard level indicates a risk of property damage.
Failure to avoid this situation could result in property damage. Follow the instructions in this warning notice to prevent property damage.

NOTE

• A note provides additional information to help you handle the product.
• This symbol can be found on the housing of the power bank and indicates that the contents of the operating instructions should be followed.
• This symbol can be found on the housing and indicates that the device uses Smart Fast Charge technology.

Safety

This device complies with statutory safety regulations. Improper use may result in personal injury and property damage.

• Basic safety instructions
  

• This device may be used by children aged 8 years and above and by persons with limited physical, sen-sory or mental capabilities, or lack of experience and knowledge, provided that they are under supervision or have been told how to use the device safely and are aware of the potential risks. Do not allow children to play with the device. Cleaning and user mainte-nance tasks may not be carried out by children unless they are supervised.

• DANGER! Do not allow children to play with the packaging material! Keep all packaging materials away from children.

There is a risk of suffocation!

•  Check the appliance for visible external damage before use. Do not operate a device which has been damaged or dropped.
•  Always place the device on a stable and level sur-face. It can be damaged if dropped.
•  Do not expose the device to direct sunlight or high temperatures. Do not cover the device during charging. Otherwise it may overheat and be irreparably dam-aged.
•  Do not place the product near heat sources such as radiators or other heat-generating appliances.
•  Keep the device away from open flames (e.g. candles) at all times.
•  It is not suitable for use in rooms with high temper-ature or humidity (e.g. bathrooms) or excessive quantities of dust.
•  Never expose the device to extreme heat. This par-ticularly applies to storage in a car. Extreme temper-atures can occur in car interiors and glove compart-ments during long periods of immobilisation. Remove electrical and electronic devices from the vehicle.
•  Do not use the device immediately after moving it from a cold room to a warm room. Always allow the device to acclimatise before turning it on.
•  Never open the device housing. None of the components in the device can be ser-viced or replaced by the user.
•  Do not make any unauthorised modifications or alter-ations to the device.
•  All repairs must be carried out by authorised special-ist companies or by the customer service department. Improper repairs may put the user at risk. They will also invalidate any warranty claims.
•  Do not expose the device to water spray or dripping water, and do not place liquid-filled objects such as vases or open drink containers on or near the device.
•  WARNING! Switch the device off immediately and disconnect any connected charging cables from the device if you smell fumes or notice any smoke. Have the device checked by a qualified specialist before using it again.If you are using a USB power supply, the socket you use must always be easily accessible so that the USB power supply can be quickly disconnected from the socket in a hazardous situation. You should also observe the operating instructions for the USB power supply.
•  WARNING! Improper use of batteries can cause fires, explosions, leakages or other hazards! Do not throw the device into a fire, as the integrated battery may explode.
•  Note any restrictions or prohibitions on use for battery-powered appliances in locations with specific hazard risks, such as petrol stations, aeroplanes, hospitals, etc.

Description of components

(See fold-out page for illustrations)

1.  Slim power bank TPB 5000 A1
2. ON/OFF button
3.  Charge level LEDs
4.  USB-C port (in-/output)
5.  USB-A port with Smart Fast Charge (output) 6 USB-A port with Smart Fast Charge (output) 7 Charging cable (USB-A to USB-C) 8 Operating instructions (symbol)

Setting up

Check package contents
(See fold-out page for illustrations)
The following components are included in delivery:

•  Slim power bank TPB 5000 A1
•  Charging cable
•  These operating instructions
•  Remove all parts of the device from the packaging and remove all packaging materials.
•  Check the package for completeness and signs of visible damage. If the delivery is incomplete or dam-age has occurred as a result of defective packaging or during transport, contact the Service hotline (see section Service).

Disposal of the packaging

• The packaging materials have been selected for their environmental friendliness and ease of disposal, and are therefore recyclable. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.
• Dispose of the packaging in an environmentally friendly manner.
  Note the labelling on the packaging and sep-arate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings: 1–7: plastics, 20–22: paper and cardboard, 80–98: composites.

Charging the power bank
Before using the power bank, the integrated battery must be fully charged.

CAUTION

•  Charge the device only in dry interior rooms.
•  The power bank must never be charged and used for charging an external device at the same time.
•  Due to the high power consumption, the power bank must be charged using a USB mains adapter. Do not charge the power bank via the USB port of a PC or notebook.
•  Use only a USB mains adapter with an output volt-age of 5 V and an output current of at least 2,1 A to charge the power bank.
•  Always disconnect the charging cable 7 when charging is complete!
•  Connect the USB-A plug of the charging cable 7 to a suitable USB power supply (not supplied).
•  Connect the USB-C plug of the charging cable 7 to the USB-C charging port 4 on the power bank.
• The charge level LEDs 3 provide a rough estimate of the charge level during charging:

Checking the charge level
You can also check the approximate charge level of the power bank when it is not charging or while it is being used for charging. Briefly press the ON/OFF button 2 once. The LEDs 3 show the current charge level of the power bank for about 35 seconds.

Handling and use

Charging mobile devices with the power bank

CAUTION

You can charge up to three devices at a time using the power bank. When all USB connections (USB-C 4 and USB A 5+6) are being used at the same time, the total power consumption of the connected mobile devices may not exceed 2.1 A.

•  Connect the supplied charging cable 7 or the origi-nal charging cable of the device you want to charge to one of the three USB outputs (4, 5 or 6).
•  Then connect the device you want to charge to the power bank 1. The charging process begins auto-matically.
•  If charging does not start automatically, press the ON/OFF button 2 once briefly to start the charging process.

NOTE

The integrated Smart Fast Charge technology enables reduced charging times for compatible de-vices. Compatible connected devices automatically receive a signal to draw the maximum available charging current.

•  During the charging process, the charge level LEDs 3 show the current charge level of the power bank (see table in the section Checking the charge level).
•  To stop charging, disconnect the charging cable from the mobile device and the power bank. The charging status LEDs 3 go out after about 35 seconds.
•  Optionally, you can press the ON/OFF button 2 twice in quick succession to turn off the power bank and the battery level LEDs 3.

Troubleshooting

The power bank does not charge.

•  The connection may be faulty. Check the connection. A connected device does not charge.
•  The integrated battery is empty. Charge the battery.
•  No connection to the device. Check the connection.
•  Press the ON/OFF button 2 once briefly to start the charging process.
•  The charging current of the connected device is too low or too high.
•  The internal overcurrent protection may have been triggered. Disconnect the connected device and brief-ly connect the USB-C charging port 4 to a power source (see section Charging the power bank). Afterwards, the power bank can be used again.

Cleaning

CAUTION.

Possible damage to the device.

• There are no serviceable parts or parts requiring cleaning inside the power bank. Moisture can cause damage to the device.
•  To avoid irreparable damage to the device, ensure that no moisture gets into the device during cleaning.
•  Do not use caustic, abrasive or solvent-based cleaning materials. These can damage the surfaces of the device.
• Clean the housing of the device with a lightly mois-tened cloth and a mild detergent only.

Storage when not in use

•  Store the device in a location which is clean, dry, dust-free and not in direct sunlight.
•  For long-term storage, the integrated battery should be fully charged to extend its operating life. During extended periods of non-use, you should top up the battery charge regularly. This is necessary to prolong the battery life.

Disposal

Disposal of the device

The symbol shown on the left of a crossed-out wheelie bin means that this device is subject to Directive 2012/19/EU. This directive states  that this device may not be disposed of in normal household waste at the end of its useful life, but must be taken to a specially set-up collection point, recycling depot or disposal company. The integrated rechargeable battery in this device cannot be removed for disposal.
This disposal is free of charge for the user. Protect the environment by disposing of this device properly.

• Your local community or municipal authorities can provide information on how to dispose of the worn-out product.
• The product is recyclable, subject to extended producer responsibility and is collected separately.

Appendix

Technical data

•  When all USB connections are being used at the same time, the total power consumption of the connected mobile devices may not exceed 2.1 A.

Notes on the EU Declaration of Conformity

2014/30/EU and the RoHS Directive 2011/65/EU. The complete EU Declaration of Conformity is available from the importer. Kompernass Handels GmbH warranty Dear Customer, This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a safe place. This will be required as proof of purchase. If any material or manufacturing fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you or refund the purchase price (at our discretion). This warranty service requires that you present the defective appliance and the proof of purchase (receipt) within the three-year warranty period, along with a brief written description of the fault and of when it occurred. If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or to fragile parts which could be considered as consumable parts such as switches, batteries or parts made of glass. The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided. This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised service centres.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

•  Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.
•  You will find the item number on the type plate on the product, an engraving on the product, on the front page of the operating instructions (below left) or on the sticker on the rear or bottom of the product.
•  If functional or other defects occur, please contact the service department listed either by telephone or by e- mail.
•  You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.
• You can download these instructions along with many other manuals, product videos and installation software at www.lidl-service.com.
• This QR code will take you directly to the Lidl service page (www.lidl-service.com) where you can open your operating instructions by entering the item number (IAN) 353867_2010.

Service

• Service Great Britain
• Tel.: 0800 404 7657
• E-Mail: kompernass@lidl.co.uk
• Service Ireland
• Tel.: 1890 930 034
• (0,08 EUR / Min., (peak))
• (0,06 EUR / Min., (off peak)) E-Mail: kompernass@lidl.ie

Importer

• Please note that the following address is not the service address. Please use the service address provided in the operating instructions.
• KOMPERNASS HANDELS GMBH
• BURGSTRASSE 21
• 44867 BOCHUM
• GERMANY
• www.kompernass.com

References

• Kompernaß - Online shop for accessories and spare parts
• de/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>