RENOGY 126 DC Home Power Supply Owner’s Manual
- July 3, 2024
- Renogy
Table of Contents
RENOGY 126 DC Home Power Supply
Technical Specifications
General
- Model: RIV1210PU-126
- Output Waveform: Pure Sine Wave
- AC Terminals: 2 x AC Sockets + Terminal Block
- DC Terminals
- Operating Temperature
- Storage Temperature
- Humidity
- Cooling
- Enclosure Rating:
- Dimensions (LxWxH): 4.3 x 2.6 x 1.3 in / 108 x 67 x 32 mm
- Weight: 7.5 lbs. / 3.4 kg
- Certification
- Front Plate Dimensions
- Wired Length
Electrical
- Continuous Output Power: 1000W
- Continuous Output Current: 8.3A AC
- Total Harmonic Distortion (THD): –
- Power Factor: –
- Surge Rating: 2000W (@ 2s)
- Output Voltage: –
- Output Frequency: –
- Rated Battery Input Voltage: –
- Battery Input Voltage Range: –
- Maximum Continuous Battery Output Current: 183.3A
- Inverter Efficiency: 92%
- Full Load Efficiency: >90%
- Power Consumption: –
- Battery Overvoltage Shutdown: Yes
- Battery Low Voltage Alarm: Yes
- Battery Low Voltage Shutdown: Yes
Product Usage Instructions
1. Connection and Power Supply
To use the Renogy Core Series Pure Sine Wave Inverter:
- Ensure the inverter is placed on a stable surface.
- Connect the inverter to the power source using the provided AC terminals or terminal block.
- Check that the battery input voltage is within the specified range.
2. Switching Between On-Grid and Off-Grid Power
The inverter allows you to seamlessly switch between on-grid AC
and off-grid DC power:
- Use the on-grid transfer switch for uninterrupted operation.
3. Safety and Monitoring
Ensure safety and monitor the inverter:
- Monitor the inverter using the built-in Bluetooth and remote control.
- Ensure proper ventilation for cooling heating sink fans.
- Be aware of low and high voltage protection, low and high current protection, and short-circuit protection features.
RENOGY CORE SERIES
12V PURE SINE WAVE INVERTER
The Renogy 12V Pure Sine Wave Power Inverter excels in smaller off-grid systems, effectively converting DC power stored in batteries to AC power, and serving as a reliable DC-to-AC converter. It prioritizes backup mains, ensuring seamless switching between mains and inverter modes. Additionally, its AC priority switch function enables automatic transition from the battery (DC) to mains (AC) and vice versa whenever there’s a power outage or restoration, ensuring an uninterrupted power supply. This inverter is a crucial component for rounding up any off-grid system, as many of them necessitat a 12V solar inverter to power daily electronics, ranging from computers to coffee makers. Incorporate this compact solar power inverter into your system to reliably power your devices
KEY FEATURE
Easy connection and power worry-free
Provide stable and continuous power, free from power outages. Renogy’s
inverter with an on-grid transfer switch, you can seamlessly switch between
on-grid AC and off-grid DC power, ensuring uninterrupted operation and worry-
free energy.
Quiet operation
Enjoy quiet operation with a power supply, boasting a noise level of less
than 51dB, With the help of a silent 12V inverter, all electronic devices run
smoothly without any noise interrupting the peaceful ambiance.
Optimize efficiency
Experience superior performance with energy pure sine wave inverter,
exceeding 92% inverter efficiency, while power consumption is less than 12%,
ensuring cost-effective operation and minimal impact on the environment.
A smarter life
Renogy DC home power supply comes with built-in Bluetooth and remote
control, providing effortless connectivity and ultimate convenience
Safety assure
Renogy DC home power supply is equipped with cooling heating sink fans and
comes with low and high voltage protection, low and high current protection,
and short-ccircuitprotection, ensuring maximum safety with inverter monitoring
TECHNICAL SPECIFICATIONS
General
| Model | RIV1210PU-126 | RIV1220PU-126 | RIV1230PU-126 |
|---|
| Output Waveform | Pure Sine Wave |
|---|---|
| AC Terminals | 2 x AC Sockets + Terminal Block |
| Block | 3 x AC Sockets + Terminal Block |
| DC Terminals | M8-25 |
| Humidity | Max 95%, Non-condensing |
|---|---|
| Cooling | Thermally Controlled Fans |
| Enclosure Rating | IP20 |
Dimensions (LxWxH)
| 15.2 × 8.1 × 3.5 in
385 × 205.4 × 88.9 mm
| 17.1 × 9.9 × 3.8 in
455 × 250.4 × 95.3 mm
| 15.9 × 10.4 × 3.8 in
496 × 263.4 × 95.3 mm
Weight| 7.5 lbs. / 3.4 kg| 11.9 lbs. / 5.4 kg| 14.3 lbs. / 6.5 kg
Certification| UL458, FCC Prat15 ClassB
Front Plate Dimensions
| 4.3 x 2.6 x 1.3 in
108 x 67 x 32 mm
| 4.3 x 2.6 x 1.3 in
108 x 67 x 32 mm
| 4.3 x 2.6 x 1.3 in
108 x 67 x 32 mm
Wired Length| 16.40ft
Electrical
| Continuous Output Power | 1000W | 2000W | 3000W |
|---|
| Continuous Output Current | 8.3A AC | 16.6A AC | 25A AC |
|---|---|---|---|
| Total Harmonic Distortion (THD) | ≤3% | ||
| Power Factor | 1.5A |
| Surge Rating | 2000W (@ 2s) | 4000W (@ 2s) | 6000W (@ 2s) |
|---|
| Output Frequency | 50/60Hz |
|---|---|
| Rated Battery Input Voltage | 12VDC |
| Battery Input Voltage Range | 11-15.5VDC |
| Maximum Continuous Battery Output Current | **** |
183.3A
| ****
166.6A
| ****
83.3A
Inverter Efficiency| >92%
Full Load Efficiency| >90%
Power Consumption| <12W| <18W| <12W
Battery Overvoltage Shutdown| 16.0VDC±0.3VDC
| Battery Low Voltage Alarm | 11.0VDC±0.3VDC |
|---|---|
| Battery Low Voltage Shutdown | 10.5VDC±0.3VDC |
Frequently Asked Questions
Q: Can I use the inverter with a solar panel system?
A: The Renogy Core Series Pure Sine Wave Inverter is compatible with solar
panel systems for efficient power conversion.
Q: What is the warranty period for this inverter?
A: For warranty information, please refer to the official Renogy website or
contact customer support.
Q: How do I troubleshoot if the inverter is not working properly?
A: If you encounter issues with the inverter, refer to the user manual for
troubleshooting steps or contact Renogy customer support for assistance.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>