SEALEY AP6310 10 Drawer Mobile Workstation with Backboard Instructions
- June 3, 2024
- SEALEY
Table of Contents
SEALEY AP6310 10 Drawer Mobile Workstation with Backboard
INTRODUCTION
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
- WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these units.
- Locate the units in a suitable work area.
- Keep the work area clean, uncluttered and ensure there is adequate lighting.
- WARNING! Use the mobile workstation on level and solid ground, preferably concrete.
- Keep the units clean and tidy in accordance with good workshop practice.
- Keep children and unauthorised persons away from the work area.
- DO NOT use these units for any purpose other than that for which they are designed.
- DO NOT use the units outdoors.
- DO NOT place the units in a damp or wet location or an area where there is condensation.
- DO NOT clean the units with any solvents which may damage the surfaces or the protective coating.
- DO NOT move the units with the drawers out. To avoid tipping, open one drawer at a time and close and secure all drawers whilst moving the mobile workstation.
- DO NOT step on the drawers.
- DO NOT overload the drawers, weight limit per drawer is 40kg.
INTRODUCTION
20mm thick wooden worktop. 10 Drawers with a 40kg capacity each. Each drawer features aluminium pull handles and non-slip liners. Six large castor wheels (four fixed and two swivel) that include brakes. Supplied with a pegboard back panel that is ideal for hanging tools and compatible with TTS range of hooks, plus 14 storage bins in two sizes. There is a cabinet for extra storage and a heavy-duty side handle for comfort and control when manoeuvring. Supplied with locks and two keys for the cabinet and draws. Some simple assembly required.
SPECIFICATION
- Overall Size Inc Handle (W x D x H): …………….. 1690 x 490 x 1432mm
- Worktop Size (W x D x H): ………………………………. 1600 x 460 x 20mm
- Small Drawer (x6): ……………………………………………505 x 415 x 80mm
- Medium Drawer (x4): ………………………………………. 505 x 415 x 143mm
- Cabinet (W x D x H): ………………………………………. 538 x 480 x 650mm
- Top Shelf (W x D x H): ……………………………………. 1600 x 200 x 43mm
ASSEMBLY
- Remove outer packaging and dissemble the wooden transport. (fig.1).Fixings located in the draw.
- Install the pegboard (fig.2).Fold upwards and fix in position.
- Install the top tray bracket (fig.3).
- Install the top tray (fig.4).
- Install the side handle over the swivelling castors. (fig.5).
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
- 01284 757500
- 01284 703534
- sales@sealey.co.uk
- www.sealey.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>